Facile construction of poly (indole‑5‑carboxylic acid) @ poly (3, 4‑ethylenedioxythiophene) label-free immunosensing platform for sensitive detection of prostate specific antigen

Formation of a Conducting Polymer by Different Electrochemical Techniques and Their Effect on Obtaining an Immunosensor for Immunoglobulin G

In this work, a conducting polymer (CP) was obtained through three electrochemical procedures to study its effect on the development of an electrochemical immunosensor for the detection of immunoglobulin G (IgG-Ag) by square wave voltammetry (SWV). The glassy carbon electrode modified with poly indol-6-carboxylic acid (6-PICA) applied the cyclic voltammetry technique presented a more homogeneous size distribution of nanowires with greater adherence allowing the direct immobilization of the antibodies (IgG-Ab) to detect the biomarker IgG-Ag. Additionally, 6-PICA presents the most stable and reproducible electrochemical response used as an analytical signal for developing a label-free electrochemical immunosensor. The different steps in obtaining the electrochemical immunosensor were characterized by FESEM, FTIR, cyclic voltammetry, electrochemical impedance spectroscopy, and SWV. Optimal conditions to improve performance, stability, and reproducibility in the immunosensing platform were achieved. The prepared immunosensor has a linear detection range of 2.0-16.0 ng·mL^-1 with a low detection limit of 0.8 ng·mL^-1. The immunosensing platform performance depends on the orientation of the IgG-Ab, favoring the formation of the immuno-complex with an affinity constant (Ka) of 4.32 × 10⁹ M^-1, which has great potential to be used as point of care testing (POCT) device for the rapid detection of biomarkers.

A novel label-free electrochemical immunesensor for ultrasensitive detection of LT toxin using prussian blue@gold nanoparticles composite as a signal amplification

In the current study, a novel electrochemical label-free immunosensor is proposed for sensitive detection of heat-labile enterotoxin (LT) from Escherichia coli. Firstly, a glassy carbon electrode (GCE) was modified by a mixture containing reduced graphene oxide/room temperature ionic liquid (rGO/RTIL) composite. Then, simultaneous electrodeposition of prussian blue and gold nanoparticles led to formation of prussian blue@gold nanoparticles (PB@GNPs) composite on the electrode surface. The modified electrode was characterized by field emission scanning electron microscopy (FE-SEM), energy dispersive spectroscopy (EDS), cyclic voltammetry (CV) and electrochemical impedance spectroscopy (EIS) techniques. After immobilization of anti-LT and blocking the unreacted sites with BSA (bovine serum albumin), the analytical performance of the proposed immunosensor was evaluated under optimal conditions (i.e. optimal pH, incubation time and temperature of incubation). Square wave voltammetry (SWV) was used to determine different concentrations of the LT antigen. The linear dynamic range of the proposed immunosensor was from 0.01 to 50 µg/mL and the detection limit of the immunosensor was found to be 0.0023 µg/mL. An acceptable selectivity in the real sample, long-term stability and goodreproducibility made the fabricated immunosensor a good candidate for detecting LT.

An ultrasensitive label-free electrochemical immunosensor based on 3D porous chitosan-graphene-ionic liquid-ferrocene nanocomposite cryogel decorated with gold nanoparticles for prostate-specific antigen

A highly sensitive and selective label-free electrochemical immunosensor was successfully fabricated for measuring prostate-specific antigen (PSA). A composite of chitosan, graphene, ionic liquid and ferrocene (CS-GR-IL-Fc) was drop casted onto a screen-printed carbon electrode (SPCE) and frozen to create a layer of 3D porous cryogel (CS-GR-IL-Fc cry) which was decorated with gold nanoparticles (AuNPs). The biocompatibility and porosity of the cryogel increased the surface area available for AuNPs loading via amino groups and the population of anti-PSA, immobilized on the AuNPs via chemisorption, could be increased. The CS-GR-IL-Fc cry displayed excellent conductivity, enhancing electron transfer and amplifying the current signal. Differential pulse voltammetry was employed to determine PSA by measuring the reduction in the Fc oxidation peak current in response to the formation of PSA/anti-PSA immunocomplex. Under the optimized incubation time and electrolyte pH, the developed immunosensor displayed excellent analytical performances, including a wide linear range at concentrations from 1.0 × 10^-7 to 1.0 × 10^-1 ng mL^-1, with a very low limit of detection of 4.8 × 10^-8 ng mL^-1 and good reproducibility (relative standard deviation of <4.6%, n = 6), stability (90% sensitivity within 20 days), repeatability (12 cycles of binding-rebinding, the sensitivity > 90%) and selectivity. The results obtained from the device for the determination of PSA in human serum were consistent with results from the enzyme-linked immunosorbent assay (P > 0.05), and indicated the promising potential of the proposed immunosensor in clinical diagnosis.

A novel signal amplification strategy electrochemical immunosensor for ultra-sensitive determination of p53 protein

In this work, we fabricated a novel sandwich-type electrochemical immunosensor for quantitative and ultra-sensitive determination of tumor suppressor protein p53 by signal amplification strategy. Conductive polymers poly (3, 4-ethylenedioxythiophene): polystyrenesulfonate (PEDOT:PSS) has significantly effect on enhancing charge transfer and markedly increases the sensitivity of electrochemical immunosensing. Gold nanoparticles (AuNPs) as high conductivity nanocarriers were also used to capture monoclonal antibodies (Ab₁) due to their large specific surface areas. In addition, pH responsive zeolitic imidazolate framework (ZIF-8) was used to load the redox probe 2, 3-diaminophenazine (DAP) and the secondary antibodies (Ab₂) to form a sensitive-type ZIF-8-DAP-Ab₂ immunoprobe. After the sandwich-type immunoassay with the free p53 protein, with the release of probe DAP after the electrochemical signal amplificated by PEDOT:PSS and AuNPs, the ultra-sensitive and quantitative determination of p53 protein was realized with working range of 1-120 ng mL^-1 and low detection limit of 0.09 ng mL^-1. Besides, the fabricated electrochemical immunosensor exhibited good recovery, high sensitivity, reliability, and selectivity.