A novel non-precious catalyst containing transition metal in nanoporous cobalt based metal-organic framework (ZIF-67) for electrooxidation of methanol

Cobalt-Copper-Embedded Nitrogen-Doped Carbon Nanostructures Derived from Zeolite Imidazolate Frameworks as Electrocatalysts for the Oxygen Reduction Reaction

In recent years, researchers have focused on developing zeolite imidazolate frameworks (ZIFs) as an alternative to Pt electrocatalysts for various applications, including water splitting, lithium-air batteries, zinc-air batteries, and fuel cells. In this study, we synthesized CoCu-ZIF to be used as a precursor in the development of cathode catalysts for the oxygen reduction reaction (ORR) in fuel cells. Hydrazine played a crucial role in maintaining uniformity in the development and particle size of the ZIF-67 structures. Moreover, it facilitated the rapid formation of the ZIF-67 structures at higher temperatures. A unique pseudorhombic dodecahedral morphology was obtained at a Co/Cu molar ratio of 7:3. Among all the synthesized N-doped carbon nanostructures embedded with Co and Cu nanoparticles, CoCu@NC-750, pyrolyzed at 750 °C, showed superior ORR catalytic performance. This catalyst exhibited a notably higher half-wave potential of 0.816 V and demonstrated a clear 4-electron transfer mechanism. The overpotential of CoCu@NC-750 shifted by only 11 mV over 10,000 cyclic voltammetry cycles, whereas a 55 mV shift was observed for Pt/C. CoCu@NC-750 exhibited a ∼0.8% decrease in current density during a 12-h ORR, in contrast to the 8.3% decline shown by Pt/C. This superior catalytic activity and stability can be attributed to factors such as higher oxygen adsorption induced by the N-doped carbon layer due to the localized changes in electron density and the enhanced stability of the bimetallic core. Our findings suggest that CoCu@NC-750 is a promising alternative to Pt/C in fuel cell cathodes.

Nickel and cobalt-based tungstate nanocomposites as promising electrocatalysts in alkaline direct methanol fuel cells

In this work, a non-precious group metal (non-PGM) electrocatalyst based on transition metals is introduced as a promising solution for enhancing the efficiency of direct methanol fuel cell (DMFC). Nickel-cobalt mixed tungstate was prepared using a simple co-precipitation method with different molar ratios of Ni, Co and W. The prepared materials were tested and validated using different characterization techniques. It was observed using SEM that the materials are agglomerated amorphous random circular nanocomposite structures. The electrochemical performance of the prepared electrocatalysts revealed that the best nanocomposite was the one with the Ni : Co : W ratio of 1 : 1 : 1.5 (W1.5). This composite showed a higher current density of 229 mA cm-2 towards methanol oxidation at a scan rate of 50 mV s-1 in 1 M methanol at 0.6 V, with the lowest onset potential of 0.33 V. The obtained results present a new strong non-PGM material for direct methanol electro-oxidation reactions and open new doors for economic and earth-abundant electrocatalysts as an alternative to expensive commercially available catalysts.

Enhanced membraneless fuel cells by electrooxidation of ethylene glycol with a nanostructured cobalt metal catalyst

The advancement of effective and long-lasting electrocatalysts for energy storage devices is crucial to reduce the impact of the energy crisis. In this study, a two-stage reduction process was used to synthesize carbon-supported cobalt alloy nanocatalysts with varying atomic ratios of cobalt, nickel and iron. The formed alloy nanocatalysts were investigated using energy-dispersive X-ray spectroscopy, X-ray diffraction, and transmission electron microscopy to determine their physicochemical characterization. According to XRD results, Cobalt-based alloy nanocatalysts form a face-centered cubic solid solution pattern, illustrating thoroughly mixed ternary metal solid solutions. Transmission electron micrographs also demonstrated that samples of carbon-based cobalt alloys displayed homogeneous dispersion at particle sizes ranging from 18 to 37 nm. Measurements of cyclic voltammetry, linear sweep voltammetry, and chronoamperometry revealed that iron alloy samples exhibited much greater electrochemical activity than non-iron alloy samples. The alloy nanocatalysts were evaluated as anodes for the electrooxidation of ethylene glycol in a single membraneless fuel cell to assess their robustness and efficiency at ambient temperature. Remarkably, in line with the results of cyclic voltammetry and chronoamperometry, the single-cell test showed that the ternary anode works better than its counterparts. The significantly higher electrochemical activity was observed for alloy nanocatalysts containing iron than for non-iron alloy catalysts. Iron stimulates nickel sites to oxidize cobalt to cobalt oxyhydroxides at lower over-potentials, which contributes to the improved performance of ternary alloy catalysts containing iron.

Hierarchical N-doped carbon nanofiber-loaded NiCo alloy nanocrystals with enhanced methanol electrooxidation for alkaline direct methanol fuel cells

The high catalytic activity of non-precious metals in alkaline media opens a new direction for the development of alkaline direct methanol fuel cell (ADMFC) electrocatalysts. Herein, a highly dispersed N-doped carbon nanofibers (CNFs) -loaded NiCo non-precious metal alloy electrocatalyst based on metal-organic frameworks (MOFs) was prepared, which conferred excellent methanol oxidation activity and resistance to carbon monoxide (CO) poisoning through a surface electronic structure modulation strategy. The porous electrospun polyacrylonitrile (PAN) nanofibers and the P-electron conjugated structure of polyaniline chains provide fast charge transfer channels, enabling electrocatalysts with abundant active sites and efficient electron transfer. The optimized NiCo/N-CNFs@800 was tested as an anode catalyst for ADMFC single cell and exhibited a power density of 29.15 mW cm^-2. Due to the fast charge transfer and mass transfer brought by its one-dimensional porous structure and the synergistic effect between NiCo alloy, NiCo/N-CNFs@800 is expected to be an economical, efficient and CO-resistant methanol oxidation reaction (MOR) electrocatalyst.

Promotion of the Efficient Electrocatalytic Production of H2O2 by N,O- Co-Doped Porous Carbon

H₂O₂ generation via an electrochemical two-electron oxygen reduction (2e^- ORR) is a potential candidate to replace the industrial anthraquinone process. In this study, porous carbon catalysts co-doped by nitrogen and oxygen are successfully synthesized by the pyrolysis and oxidation of a ZIF-67 precursor. The catalyst exhibits a selectivity of ~83.1% for 2e^- ORR, with the electron-transferring number approaching 2.33, and generation rate of 2909.79 mmol g^-1 h^-1 at 0.36 V (vs. RHE) in KOH solution (0.1 M). The results prove that graphitic N and -COOH functional groups act as the catalytic centers for this reaction, and the two functional groups work together to greatly enhance the performance of 2e^- ORR. In addition, the introduction of the -COOH functional group increases the hydrophilicity and the zeta potential of the carbon materials, which also promotes the 2e^- ORR. The study provides a new understanding of the production of H₂O₂ by electrocatalytic oxygen reduction with MOF-derived carbon catalysts.

Construction of a Tl(I) voltammetric sensor based on ZIF-67 nanocrystals: optimization of operational conditions via response surface design

An electroanalytical sensor was constructed constituted on a carbon paste electrode (CPE) with a ZIF-67 modifier and devoted to the quantification of Tl(I). Several characterization tests including XRD, BET, FT-IR, SEM/EDS/mapping, TEM, impedance spectroscopy (EIS), and cyclic voltammetry (CV) were performed on the synthesized ZIF-67 nanocrystals and CPE matrix. Central composite design (CCD) was used to assess the impact of variables affecting the sensor response, including the weight percent of ZIF-67 (14%), the pH of the thallium accumulation solution (6.4), and accumulation time (315 s) as well as the accumulation potential (-1.2 V). The direct linear relationship between the sensor response and the concentration of Tl(I) is in the interval of 1.0×10^-10 to 5.0×10^-7 M (coefficient of determination = 0.9994). The detection limit is approximately 1.0 × 10^-11 M. The right selection of the MOF makes this sensor highly resistant to the interference of other ions. High selectivity against common interferences in the measurement of thallium (such as Pb(II) and Cd(II)) is an important feature of this sensor. To confirm the performance of the prepared sensor, the amount of thallium in the real sample was determined.

Engineering triangular bimetallic metal-organic-frameworks derived hierarchical zinc-nickel-cobalt oxide nanosheet arrays@reduced graphene oxide-Ni foam as a binder-free electrode for ultra-high rate performance supercapacitors and methanol electro-oxidation

The rigorous fabrication of electrode materials using upper-ranked porous precursor especially metal organic frameworks (MOFs) are challenging but appealing task to procure electrochemical energy storage and conversion system with altitudinous performance. Herein, we replenish the rational construction of atypical electrode of hollow Zn-Ni-Co-oxide (ZNCO) nanosheet arrays onto rGO garnished Ni foam (rGO/NF) via two step solution based method. Firstly, 2D Zn-Co-MOFs derived nanoleave arrays are prepared by co-precipitation method. Next, hollow and porous ZNCO nanostructure from 2D solid nanoleave arrays are achieved by ion-exchange and etching process conjoined with post annealing treatment. The as-fabricated hierarchical ZNCO nanosheet arrays offer large numbers of electroactive sites with short ion-diffusion pathways, reflecting the outstanding electrochemical performance in-terms of excellent specific capacity (267 mAh g^-1) ultra-high rate capability (83.82% at 50 A/g) and long-term cycling life (~90.16%) in three electrode configuration for supercapacitor (SCs). Moreover, the hollow and porous ZNCO nanostructure responds as immensely active and substantial electrocatalyst for methanol oxidation with lowest onset potential of 0.27 V. To demonstrate the practicability, hybrid supercapacitor (HSC) device is constructed using ZNCO@rGO-NF nanostructure as positive and rGO decorated MOF derived porous carbon (rGO-MDPC) as negative electrode. The as-assembled ZNCO//rGO-MDPC ASC device delivers higher energy density of 61.25 Wh kg^-1 at the power density of 750 W kg^-1 with long-term cyclic stability (<6% to its initial specific capacity value) after 6000 cycles.

A novel self-assembled-derived 1D MnO2@Co3O4 composite as a high-performance Li-ion storage anode material

Manganese dioxide (MnO₂) is a high-performance anodic material and applied widely in lithium-ion batteries (LIBs).