Mesoporous gold nanoparticles supported cobalt nanorods as a free-standing electrochemical sensor for sensitive hydrogen peroxide detection

A novel microfluidic chip integrating with microcolumn array electrodes for rapid and ultrasensitive detection of alpha-fetoprotein

BACKGROUND

Cancer posed a serious threat to human health, and early diagnosis of cancer biomarker was extremely important for the treatment and control of cancer. Electrochemistry-based assays were low-cost, responsive and easy to operate, but there were some challenges in terms of accuracy, detection limit, efficiency and portability. The combination of microfluidic devices and electrochemical methods was expected to construct a high-performance sensing platform, but long-time antigen-antibody incubation was still required. Therefore, a novel microfluidic chip needs to be developed, which has the advantages of good portability, short incubation time, high accuracy, low detection limit and great application to point-of-care testing.

RESULTS

A microfluidic sensor based on microcolumn array electrodes was developed, in which microcolumns could create local mixed flow to reduce the incubation time of target molecules and enhance their interaction with the sensing interface. Besides, three dimensional Mxene fibers-gold nanoparticles (3D MF-Au) was modified on the microcolumn array electrodes to increase active sites and provide more electrolyte shuttle holes. The electrolyte turbulence caused by the microcolumn array electrodes could heighten the contact between the target molecules and sensing interface and accelerate the transfer of redox pairs, thus reducing the incubation time of the target molecules and improving the electrochemical responses in synergy with the 3D MF-Au. Herein, the detection of AFP was chosen as a model, and the microfluidic sensor possessed superior performance for analysis of AFP in the range of 0.1 pg mL-1 - 200 ng mL-1 with a low detection limit (LOD) of 0.0648 pg mL-1.

SIGNIFICANCE

This microfluidic chip integrating with microcolumn array electrodes has been successfully implemented to detect AFP in human serum, and the results were consistent with that of electrochemical chemiluminescence method. The microfluidic chip provided a new strategy of portability, shortening incubation time and enhancing electrical signals for antigen detection of real samples, which showed great utilization potentiality in point-of-care testing.

Electrophoretic Deposition of Co3O4 Particles/Reduced Graphene Oxide Composites for Efficient Non-Enzymatic H2O2 Sensing

In this work, the facile fabrication of Co₃O₄ particles/reduced graphene oxide (Co₃O₄/rGO) composites on Indium tin oxide (ITO) slide was achieved by an electrophoretic deposition and annealing process. The deposition time and ratio of the precursors were optimized. Structural characterization and chemical composition investigation indicated successful loading of Co₃O₄ particles on graphene sheets. When applied as a non-enzymatic H₂O₂ sensor, Co₃O₄/rGO showed significant electrocatalytic activity, with a wide linear range (0.1-19.5 mM) and high sensitivity (0.2247 mA mM^-1 cm^-2). The good anti-interference ability, reproducibility, and long-term stability of the constructed sensor were also presented. The application of Co₃O₄/rGO in real sample analysis was evaluated in human urine sample with satisfactory results, indicating the feasibility of the sensor in physiological and medical applications.

A microfluidic organic transistor for reversible and real-time monitoring of H2O2 at ppb/ppt levels in ultrapure water

A microfluidic organic transistor functionalized with phenylboronic acid firstly succeeded in reversible and real-time monitoring of H₂O₂ at ppb/ppt levels in ultrapure water, which would be used not only as portable chemical sensors but also as monitoring tools to clarify unknown reaction mechanisms of phenylboronic acid with H₂O₂.

Electrochemical sensor for the non-enzymatic reduction of hydrogen peroxide and oxidation of gallic acid using a polyamidoblack-10B (PAB)-modified electrode

A novel electrochemical sensor for the oxidation of gallic acid and reduction of hydrogen peroxide using a paraffin impregnated graphite electrode modified with polyamidoblack 10B is developed.

Colorimetric sensing of cephradine through polypropylene glycol functionalized gold nanoparticles

The development of metal nanoparticle-based facile colorimetric assays for drugs and insecticides is an emerging area of current scientific research. In the present work, polypropylene glycol was used for stabilization of gold nanoparticles (AuNPs) in a simple one-pot two-phase process and subsequently employed it for the specific detection of cephradine (CPH). The characterization of the prepared PPG-AuNPs was conducted through various analytical techniques such as UV-visible spectrophotometry, Fourier transform infrared spectroscopy, atomic force microscopy (AFM), zeta potential and zetasizer techniques. As the major target of the study, the stabilized PPG-AuNPs were employed for colorimetric detection of CPH and other drugs. Typical wine-red colour of PPG-AuNPs disappeared immediately and surface plasmon resonance band quenched by addition of CPH in the presence of several other interferents (drugs and salts) and in real samples. PPG-AuNPs permitted efficient, selective, reliable and rapid determination in a concentration range of 0.01-120 mM with a detection limit (LoD) of 11.0 mM. The developed sensor has the potential to be used for fast scanning of pharmaceutical formulations for quantification of CPH at production facilities.

Facile Green Approach for Developing Electrochemically Reduced Graphene Oxide-Embedded Platinum Nanoparticles for Ultrasensitive Detection of Nitric Oxide

Nitric oxide (NO) plays a crucial and important role in cellular physiology and also acts as a signaling molecule for cancer in humans. However, conventional detection methods have their own limitations in the detection of NO at low concentrations because of its high reactivity and low lifetime. Herein, we report a strategy to fabricate Pt nanoparticle-decorated electrochemically reduced graphene oxide (erGO)-modified glassy carbon electrode (GCE) with efficiency to detect NO at a low concentration. For this study, Pt@erGO/GCE was fabricated by employing two different sequential methods [first GO reduction followed by Pt electrodeposition (SQ-I) and Pt electrodeposition followed by GO reduction (SQ-II)]. It was interesting to note that the electrocatalytic current response for SQ-I (184 μA) was ∼15 and ∼3 folds higher than those of the bare GCE (11.7 μA) and SQ-II (61.5 μA). The higher current response was mainly attributed to a higher diffusion coefficient and electrochemically active surface area. The proposed SQ-I electrode exhibited a considerably low LOD of 52 nM (S/N = 3) in a linear range of 0.25-40 μM with a short response time (0.7 s). In addition, the practical analytical applicability of the proposed sensor was also verified.

Detection Technologies for Reactive Oxygen Species: Fluorescence and Electrochemical Methods and Their Applications

Reactive oxygen species (ROS) have been found in plants, mammals, and natural environmental processes. The presence of ROS in mammals has been linked to the development of severe diseases, such as diabetes, cancer, tumors, and several neurodegenerative conditions. The most common ROS involved in human health are superoxide (O2•-), hydrogen peroxide (H2O2), and hydroxyl radicals (•OH). Organic and inorganic molecules have been integrated with various methods to detect and monitor ROS for understanding the effect of their presence and concentration on diseases caused by oxidative stress. Among several techniques, fluorescence and electrochemical methods have been recently developed and employed for the detection of ROS. This literature review intends to critically discuss the development of these techniques to date, as well as their application for in vitro and in vivo ROS detection regarding free-radical-related diseases. Moreover, important insights into and further steps for using fluorescence and electrochemical methods in the detection of ROS are presented.