Unravelling the mechanisms controlling the electro-generation of ferrate using four iron salts in boron-doped diamond electrodes

Electrochemically producing high-valent iron-oxo species for phenolics-laden high chloride wastewater pretreatment

Electrochemical advanced oxidation processes (EAOPs) have shown great promise for treating industrial wastewater contaminated with phenolic compounds. However, the presence of chloride in the wastewater leads to the production of undesirable chlorinated organic and inorganic byproducts, limiting the application of EAOPs. To address this challenge, we investigated the potential of incorporating Fe(II) and Fe(III) into the EAOPs with a boron-doped diamond (BDD) anode under near-neutral conditions. Our findings revealed that both Fe(II) and Fe(III) facilitated the generation of high-valent iron-oxo species (Fe(IV) and Fe(V)) in the anodic compartment, thereby reducing the oxidation contribution of reactive chlorine species. Remarkably, the addition of 1000 μM Fe(II) under high chloride conditions resulted in over a 2.8-fold increase in the oxidation rate of 50 μM phenolic contaminants at pH 6.5. Furthermore, 1000 μM Fe(II) contributed to a reduction of more than 66% in the formation of chlorinated byproducts, consequently enhancing the biodegradability of the treated water. Additionally, transitioning from batch mode to continuous flow mode further amplified the positive effects of Fe(II) on the EAOPs. Overall, this study presents a modified electrochemical approach that simultaneously enhanced the degradation of phenolic contaminants and improved the biodegradability of wastewater with high chloride concentrations.

Research and application of active species based on high-valent iron for the degradation of pollutants: A critical review

Fe(VI), as a new green treatment agent, has two indispensable processes in water treatment: coagulation and oxidation. Fe(VI) has a strong oxidation ability. The intermediate iron species (Fe(V) and Fe(IV)) and reactive radical species (H2O2, •OH, and O2•-) produced by decomposition and reduction reaction have strong oxidation ability, in addition, the hydrolyzed product formed in situ with core (γ-Fe2O3)-shell (γ-FeOOH) structure also has good coagulation effect. Because Fe(VI) is easy to decompose and challenging to preserve, it limits the application and sometimes significantly reduces the subsequent processing effect. How to make Fe(VI) more efficient use is a hot spot in current research. This article summarizes the distribution of active substances during the hydrolysis of Fe(VI), distinguish the differences mechanisms in the similar regulation methods, reviews the current preparation methods of Fe(VI), and finally reviews the applications of Fe(VI) in the field of environmental remediation.

Selective Removal of Emerging Organic Contaminants from Water Using Electrogenerated Fe(IV) and Fe(V) under Near-Neutral Conditions

Fe(IV) and Fe(V) are promising oxidants for the selective removal of emerging organic contaminants (EOCs) from water under near-neutral conditions. The Fe(III)-assisted electrochemical oxidation system with a BDD anode (Fe(III)-EOS-BDD system) has been employed to generate Fe(VI), while the generation and contributions of Fe(IV) and Fe(V) have been largely ignored. Thus, we examined the feasibility and involved mechanisms of the selective degradation of EOCs in the Fe(III)-EOS-BDD system under near-neutral conditions. It was found that Fe(III) application selectively accelerated the electro-oxidation of phenolic and sulfonamide organics and made the oxidation system be resistant to interference from Cl^-, HCO₃^-, and humic acid. Several lines of evidence indicated that EOCs were decomposed via direct electron-transfer process on the BDD anode and by Fe(IV) and Fe(V) but not Fe(VI), besides HO^•. Fe(VI) was not generated until the exhaustion of EOCs. Furthermore, the overall contributions of Fe(IV) and Fe(V) to the oxidation of phenolic and sulfonamide organics were over 45%. Our results also revealed that Fe(III) was oxidized primarily by HO^• to Fe(IV) and Fe(V) in the Fe(III)-EOS-BDD system. This study advances the understanding of the roles of Fe(IV) and Fe(V) in the Fe(III)-EOS-BDD system and provides an alternative for utilizing Fe(IV) and Fe(V) under near-neutral conditions.

Simultaneous electrochemical oxidation and ferrate generation for the treatment of atrazine: A novel process for water treatment applications

A novel process involving the simultaneous electrochemical-oxidation (EO) and electrosynthesis of ferrate has been investigated for the treatment of the commonly detected and recalcitrant pesticide, atrazine. The present study considered the electrosynthesis of ferrate, in neutral pH, using low concentration iron (Fe²⁺) representative of raw water levels and its subsequent effect on atrazine degradation. Ferrate synthesis was unaffected by current density (10-80 mA cm^-2), indicating mass transport limitations. Synthesis was affected by the initial iron concentration, whereby 0.051, 0.108 and 0.332 mg L^-1 was generated with an Fe²⁺ concentration of 0.5, 1.0 and 3.0 mg L^-1, respectively. When operating under simultaneous EO and ferrate oxidation, atrazine degradation exceeded that of a solely EO process. From an initial concentration of 2.00 mg L^-1, atrazine was degraded to 1.34, 1.05 and 0.51 mg L^-1 during 10, 40 and 80 mA cm^-2, characterised by pseudo-first-order kinetics. Degradation with electrochemically-generated ferrate could be described by second-order kinetics, and yielded a degradation rate constant of 23.5 M^-1 s^-1. The effect of natural organic matter (NOM) on atrazine degradation was also investigated. Ferrate was observed to be mostly scavenged by resorcinol, a representative NOM compound, having a second-order reaction rate constant of 9.71 × 102 M^-1 s^-1.

Simultaneous Electrochemical Generation of Ferrate and Oxygen Radicals to Blue BR Dye Degradation

In this study, electro-oxidation (EOx) and in situ generation of ferrate ions [Fe(VI)] were tested to treat water contaminated with Blue BR dye (BBR) using a boron-doped diamond (BDD) anode. Two electrolytic media (0.1 M HClO4 and 0.05 M Na2SO4) were evaluated for the BDD, which simultaneously produced oxygen radicals (•OH) and [Fe(VI)]. The generation of [Fe(VI)] was characterized by cyclic voltammetry (CV) and the effect of different current intensity values (e.g., 7 mA cm−2, 15 mA cm−2, and 30 mA cm−2) was assessed during BBR degradation tests. The discoloration of BBR was followed by UV-Vis spectrophotometry. When the EOx process was used alone, only 78% BBR discoloration was achieved. The best electrochemical discoloration conditions were found using 0.05 M Na2SO4 and 30 mA cm−2. Using these conditions, overall BBR discoloration values up to 98%, 95%, and 87% with 12 mM, 6 mM, and 1 mM of FeSO4, respectively, were achieved. In the case of chemical oxygen demand (COD) reduction, the EOx process showed only a 37% COD reduction, whereas combining [Fe(VI)] generation using 12 mM of FeSO4 achieved an up to 61% COD reduction after 90 min. The evolution of reaction byproducts (oxalic acid) was performed using liquid chromatography analysis.