A hydrogen evolution reaction induced unprecedentedly rapid electrocatalytic reduction of 4-nitrophenol over ZIF-67 compare to ZIF-8

Recent Progress Toward Electrocatalytic Conversion of Nitrobenzene

Despite that extensive efforts have been dedicated to the search for advanced catalysts to boost the electrocatalytic nitrobenzene reduction reaction (eNBRR), its progress is severely hampered by the limited understanding of the relationship between catalyst structure and its catalytic performance. Herein, this review aims to bridge such a gap by first analyzing the eNBRR pathway to present the main influential factors, such as electrolyte feature, applied potential, and catalyst structure. Then, the recent advancements in catalyst design for eNBRR are comprehensively summarized, particularly about the impacts of chemical composition, morphology, and crystal facets on regulating the local microenvironment, electron and mass transport for boosting catalytic performance. Finally, the future research of eNBRR is also proposed from the perspectives of performance enhancement, expansion of product scope, in-depth understanding of the reaction mechanism, and acceleration of the industrialization process through the integration of upstream and downstream technologies.

ZIF-67 In Situ Grown on Attapulgite: A Flame Retardant Synergist for Ethylene Vinyl Acetate/Magnesium Hydroxide Composites

ZIF-67@ATP was prepared by the in situ growth of the zeolite imidazole frame (ZIF-67) on the surface of attapulgite (ATP). The structure and surface morphology of ZIF-67@ATP were characterized by Fourier transform infrared spectroscopy (FTIR), X-ray diffraction (XRD), X-ray photoelectron spectroscopy (XPS), scanning electron microscopy (SEM) and transmission electron microscopy (TEM). Different mass fractions of ATP and ZIF-67@ATP were added to ethylene vinyl acetate (EVA)/magnesium hydroxide (MH) composites as flame retardant synergists. The flame retardancy of EVA composites was evaluated by the limiting oxygen index (LOI) test, UL-94 test and cone calorimeter test. Composites containing 3 wt% of ZIF-67@ATP reached an LOI value of 43% and a V-0 rating in the UL-94 test, and the ignition time of the composite increased from 38 s to 56 s. The tensile strength and impact strength of the composites did not change significantly, but the elongation at break increased greatly. Typically, for composites containing 4 wt% of ZIF-67@ATP, the elongation at break of the composites increased from 69.5% to 522.2% compared to the samples without the synergist. This study provides novel insights into the application of attapulgite in the field of flame retardant polymer materials.

J, Yao Y, Wang J, Shen Y, Gooding JJ, Liang K. Self-Propelled Initiative Collision at Microelectrodes with Vertically Mobile Micromotors

Impact experiments enable single particle analysis for many applications. However, the effect of the trajectory of a particle to an electrode on impact signals still requires further exploration. Here, we investigate the particle impact measurements versus motion using micromotors with controllable vertical motion. With biocatalytic cascade reactions, the micromotor system utilizes buoyancy as the driving force, thus enabling more regulated interactions with the electrode. With the aid of numerical simulations, the dynamic interactions between the electrode and micromotors are categorized into four representative patterns: approaching, departing, approaching-and-departing, and departing-and-reapproaching, which correspond well with the experimentally observed impact signals. This study offers a possibility of exploring the dynamic interactions between the electrode and particles, shedding light on the design of new electrochemical sensors.

Flower-like molybdenum disulfide decorated ZIF-8-derived nitrogen-doped dodecahedral carbon for electro-catalytic degradation of phenol

In this work, flower-like molybdenum disulfide was constructed on the surface of ZIF-8-derived nitrogen-doped dodecahedral carbon (ZNC) for the electrocatalytic degradation of phenol. The flower-like nanostructure of MoS₂@ZNC contributed to the exposure of more edge-active sites of MoS₂. At the same time, Mo⁴⁺ and Mo⁶⁺ co-existed in MoS₂@ZNC, which promoted the generation of H₂O₂ and •OH, and improved the catalytic activity of composite materials. In addition, electrochemical performance analysis showed that MoS₂ loaded on the surface of ZNC significantly improved the redox capacity of the material, and the composite ratio of MoS₂ and ZNC affected the structure and properties of MoS₂@ZNC composites. Moreover, the electrochemical performance of prepared MoS₂@ZNC was evaluated by the generation of hydroxyl (•OH) and the degradation efficiency of phenol. The results showed that MoS₂@ZNC-2 had an excellent phenol degradation efficiency (98.8%) and COD removal efficiency (86.8%) within 120 min. Furthermore, MoS₂@ZNC cathode still maintained good performance after being experimented with 20 times, indicated the excellent stability of MoS₂@ZNC.

C-Heterogenized Re Nanoparticles as Effective Catalysts for the Reduction of 4-Nitrophenol and Oxidation of 1-Phenylethanol

Rhenium nanoparticles (Re NPs) supported on Norit (activated carbon—C) and graphene (G) were prepared by a solvothermal method under microwave irradiation (MW). The synthesised heterogeneous catalysts were characterised and tested as reduction and oxidation catalysts, highlighting their dual catalytic behaviour. In the first case, they were used, for the first time, to reduce 4-nitrophenol, in aqueous medium, under MW irradiation. Re catalysts were easily recovered by centrifugation and recycled up to six times without significant activity loss. However, the same Re catalysts in MW-assisted oxidation of 1-phenylethanol with no added solvent experienced a significant loss of activity when recycled. The higher activity of the rhenium nanoparticles supported on graphene (Re/G) catalyst in both reactions was assigned to the higher dispersion and smaller particle size of Re NPs when graphene is the support.

The role of synthesis vis-à-vis the oxygen vacancies of Co3O4 in the oxygen evolution reaction

The combustion synthesized Co3O4 due to high oxygen vacancies exhibited a significant oxygen evolution reaction as has been probed by electrocatalytic experiments and DFT calculations.

Synthesis of dihydropyrimidinones via multicomponent reaction route over acid functionalized Metal-Organic framework catalysts

Multi component reactions over heterogeneous solid acid catalysts are extremely important owing to easy separation, amenable recycling, and prospective scaling up of the process. Here, we are reporting the synthesis of biologically important dihydropyrimidinones over postsynthetic modified Cr-based metal-organic framework materials as heterogeneous catalysts containing the bifunctional Lewis and Brønsted acid sites. Cr-based metal-organic frameworks contained coordinatively unsaturated metal sites as inherent Lewis acid sites, whereas postsynthetic modifications introduced the Brønsted acid sites in the framework. A direct one pot synthesis route was employed to produce the pristine MOF in pure aqueous medium without using any additives. The bulk structure, morphology, surface and bonding properties of the synthesized materials were thoroughly characterized with powder XRD, FTIR, XPS, FE-SEM, TGA, and N₂ sorption isotherms. A qualitative evolution of acid strength was carried out over the functionalized MOFs. Among the post synthetic functionalized materials, carboxylic acid functionalized framework exhibited a very high yield of dihydropyrimidinones under solvent less moderate reaction conditions. The catalyst also demonstrated a robust recyclability and wide substrate scope. Comparative study showed a very high catalytic activity of the postsynthetic modified MOFs in comparison to the reported literature. The reaction condition was optimized by varying parameters like solvent, temperature, reaction duration and catalyst loadings. The mechanistic studies indicated the involvement of both the Lewis and Brønsted sites acid sites of the catalysts in the multicomponent reaction.

Core-shell ZIF-8@MIL-68(In) derived ZnO nanoparticles-embedded In2O3 hollow tubular with oxygen vacancy for photocatalytic degradation of antibiotic pollutant

Developing a novel core-multishelled metal oxide hollow tube with rich oxygen vacancy is highly attractive in photocatalytic degradation of antibiotic pollutant. Herein, ZnO@In₂O₃ core-shell hollow microtubes were synthesized via one-step calcination of ZIF-8@MIL-68(In) formed by an in-situ self-assembly. TEM images demonstrate that 0D ZnO quantum dots (QDs) shell with 0.2 µm were well coated on the surface of 1D In₂O₃ hollow tube as the core with 1.2 µm. The synthesized heterostructure indicates the enhanced photocatalytic performance in tetracycline (TC) degradation compared with single ZIF-derived ZnO and MIL-68(In)-derived In₂O₃ under simulated solar irradiation. Besides, organic pollutants including malachite green (MG), methylene blue (MB) and rhodamine B (RhB) are further used to evaluate the photocatalytic activity of ZnO@In₂O₃, and the effect of weight ratios between ZnO and In₂O₃ on degradation efficiency is also studies. The ZnO@In₂O₃ heterojunction can provide higher specific surface area, expose more active sites, possess appropriate number of oxygen vacancies, enhance light absorption and further effectively boost the transfer and separation of photoinduced charge carriers. In addition, the proposed photocatalytic mechanism and degradation pathway are discussed in detail based on active species trapping test, electron spin resonance (ESR) and LCMS.

In situ growth zeolite imidazole framework materials on chitosan for greatly enhanced antibacterial effect

Zeolite imidazole framework materials (ZIFs) are a new type of antibacterial material with high chemical and thermal stability, and good antibacterial effect. However, powder ZIFs materials have the disadvantages of difficult separation and easy aggregation, which limit their application. In this work, ZIFs and chitosan (CS) were compounded by in-situ growth method to prepare a new antibacterial agent. The synergism of CS and ZIFs can effectively promote antibacterial effect compared with CS and pristine ZIFs, and CS/ZIF-67(1:6) has the best antibacterial activity, and its inhibitory rate (in 15 h) of E. coli is 96.75%, and the inhibitory rate of S. aureus reaches as high as 100%. This composites can effectively cause bacterial cell membrane rupture and leakage of internal nucleic acid and protein, leads to achieve antibacterial effect, and also exhibit excellent long-term (at least 5 days) antibacterial properties, the leaching of cobalt is below than 0.5 mg·L^-1, and this composites are with excellent bio-compatibility.

Construction of a Tl(I) voltammetric sensor based on ZIF-67 nanocrystals: optimization of operational conditions via response surface design

An electroanalytical sensor was constructed constituted on a carbon paste electrode (CPE) with a ZIF-67 modifier and devoted to the quantification of Tl(I). Several characterization tests including XRD, BET, FT-IR, SEM/EDS/mapping, TEM, impedance spectroscopy (EIS), and cyclic voltammetry (CV) were performed on the synthesized ZIF-67 nanocrystals and CPE matrix. Central composite design (CCD) was used to assess the impact of variables affecting the sensor response, including the weight percent of ZIF-67 (14%), the pH of the thallium accumulation solution (6.4), and accumulation time (315 s) as well as the accumulation potential (-1.2 V). The direct linear relationship between the sensor response and the concentration of Tl(I) is in the interval of 1.0×10^-10 to 5.0×10^-7 M (coefficient of determination = 0.9994). The detection limit is approximately 1.0 × 10^-11 M. The right selection of the MOF makes this sensor highly resistant to the interference of other ions. High selectivity against common interferences in the measurement of thallium (such as Pb(II) and Cd(II)) is an important feature of this sensor. To confirm the performance of the prepared sensor, the amount of thallium in the real sample was determined.

Novel SnO2@ZIF-8/gC3N4 nanohybrids for excellent electrochemical performance towards sensing of p-nitrophenol

Herein, a novel synthetic strategy has been proposed to prepare engineered SnO₂@ZIF-8/gC₃N₄ nanohybrids for electrochemical sensing of p-nitrophenol (p-NP). The electrochemical properties were investigated using cyclic voltammetry (CV), chronoamperometry (CA), and differential pulse voltammetry (DPV). The developed nanohybrid sensor displayed an excellent electrochemical performance towards sensing of p-NP with a detection limit of 0.565 μM. The sensitivity of the prepared nanohybrid was found to be 2.63 μAcm^-2μM^-1. Moreover, the newly fabricated sensor exhibited remarkable selectivity (over tenfold excess) in the presence of common interferents. The simultaneous detection of isomers of nitrophenol is difficult using the developed sensor. However, other common interferents, such as phenol and aminophenol have negligible effects on the sensitivity of SnO₂@ZIF-8/gC₃N₄ towards the detection of p-nitrophenol. Further, the newly developed sensor showed consistency of sensing response up to 30 days. Thus, implementation of SnO₂@ZIF-8/gC₃N₄ nanohybrids as a p-NP electrochemical sensor offers the advantages of simplicity, selectivity, and stability.

Efficient recovery of Cu(II) by LTA-zeolites with hierarchical pores and their resource utilization in electrochemical denitrification: Environmentally friendly design and reutilization of waste in water

Water pollution seriously endangers human health and the environment. Here we prepared and tested mesoporous LTA zeolites for the adsorption of Cu(II) from aqueous media and the captured copper was further used for electrochemical nitrate reduction. The prepared hierarchically porous LTA exhibited a high capacity (341.5 mg g^-1) for Cu(II) adsorption, following the pseudo-second-order kinetic and Freundlich adsorption isotherm models well. The Cu-LTA sample was characterised by various analytical methods, and Cu(I) species were identified as the active sites for nitrate electrochemical reduction. Based on the spectral characterization and reducibility, strong metal-support interaction was found between copper and LTA, which is beneficial to the dispersion of active sites and their contacts with nitrates. In total, 10.1 g-N-NO₃ g^-1-Cu was reduced over the Cu-LTA-modified cathode in a three-electrode system with high N₂ selectivity (92.1 %). Compared to purely microporous zeolites, mesoporous LTA has a higher capacity for Cu(II) removal and nitrate reduction. The mesoporous structure allows easy access to the inner active sites with low diffusion resistance. The low Tafel slope and high current density confirm the high activity of the mesoporous Cu-LTA, making it a promising and efficient material for the removal and reuse of heavy metal ions.

Simple Environmentally-Friendly Reduction of 4-Nitrophenol

The low molecular-mass organic compound 4-nitrophenol is involved in many chemical processes and is commonly present in soils and in surface and ground waters, thereby causing severe environmental impact and health risk. Several methods have been proposed for its transformation (bio and chemical degradation). However, these strategies not only produce equally or more toxic aromatic species but also require harsh operating conditions and/or time-consuming treatments. In this context, we report a comprehensive and systematic study of the electrochemical reduction of 4-nitrophenol as a viable alternative. We have explored the electrochemical reduction of this pollutant over different metallic and carbonaceous substrata. Specifically, we have focused on the use of gold and silver working electrodes since they combine a high electrocatalytic activity for 4-nitrophenol reduction and a low electrocatalytic capacity for hydrogen evolution. The influence of the pH, temperature, and applied potential have also been considered as crucial parameters in the overall optimization of the process. While acidic media and high temperatures favor the clean reduction of 4-nitrophenol to 4-aminophenol, the simultaneous hydrogen evolution is pernicious for this purpose. Herein, a simple and effective electrochemical method for the transformation of 4-nitrophenol into 4-aminophenol is proposed with virtually no undesired by-products.