Facile fabrication of ZnO/CuS heterostructure photoanode with highly PEC performance and excellent charge separation efficiency

SPR Effect Enables Flexible Electronic Environment and Activity of Cd0.7In2.2S4-30 for High-Performance Pyro-PEC Catalytic Capability

Plasma-semiconductor systems hold significant promise in the field of photoelectrocatalysis. In this study, the pyroelectric material cadmium indium sulfide (Cd0.7In2.2S4-30) and Pt were used as catalysts, and a temperature gradient was introduced to investigate the influence of surface plasmon resonance (SPR) effect on the pyroelectric and photocatalytic performance. Interestingly, under the influence of the SPR effect, Cd0.7In2.2S4-30 demonstrates a 1.6-fold and 1.4-fold increase in current density under photocatalytic and pyro-photoelectrocatalytic conditions at 1.23 V vs RHE, respectively. Furthermore, under the protection of surface metal Pt, a notable enhancement in the charge separation efficiency and stability of the photoelectrode material is observed. The combination of outstanding performance reveals that Pt noble metal ions, influenced by the SPR effect, generate a localized electric field at the adjacent semiconductor interface, enhancing the charge transfer capability between metal nanoparticles and the semiconductor, thereby promoting electron-hole separation and improving semiconductor photocatalytic activity. Additionally, the SPR effect increases the yield of high-energy pyro-electrons on plasma metal and facilitates their effective transfer to the semiconductor, thereby promoting the generation of thermally induced electrons. This study reveals the multifaceted of SPR effects on the behaviors of semiconductors and provides an opportunity to rationally design metal-semiconductor photocatalytic materials for efficient solar energy conversion.

Bi2 Te3 /Bi2 Se3 /Bi2 S3 Cascade Heterostructure for Fast-Response and High-Photoresponsivity Photodetector and High-Efficiency Water Splitting with a Small Bias Voltage

Large-scale multi-heterostructure and optimal band alignment are significantly challenging but vital for photoelectrochemical (PEC)-type photodetector and water splitting. Herein, the centimeter-scale bismuth chalcogenides-based cascade heterostructure is successfully synthesized by a sequential vapor phase deposition method. The multi-staggered band alignment of Bi₂ Te₃ /Bi₂ Se₃ /Bi₂ S₃ is optimized and verified by X-ray photoelectron spectroscopy. The PEC photodetectors based on these cascade heterostructures demonstrate the highest photoresponsivity (103 mA W^-1 at -0.1 V and 3.5 mAW^-1 at 0 V under 475 nm light excitation) among the previous reports based on two-dimensional materials and related heterostructures. Furthermore, the photodetectors display a fast response (≈8 ms), a high detectivity (8.96 × 10⁹ Jones), a high external quantum efficiency (26.17%), and a high incident photon-to-current efficiency (27.04%) at 475 nm. Due to the rapid charge transport and efficient light absorption, the Bi₂ Te₃ /Bi₂ Se₃ /Bi₂ S₃ cascade heterostructure demonstrates a highly efficient hydrogen production rate (≈0.416 mmol cm^-2  h^-1 and ≈14.320 µmol cm^-2  h^-1 with or without sacrificial agent, respectively), which is far superior to those of pure bismuth chalcogenides and its type-II heterostructures. The large-scale cascade heterostructure offers an innovative method to improve the performance of optoelectronic devices in the future.

Cuprous oxide coated silver/graphitic carbon nitride/cadmium sulfide nanocomposite heterostructure: Specific recognition of carcinoembryonic antigen through sandwich-type mechanism

The development of the effective diagnostic method for the determination of cancer biomarkers is one of the most promising strategies for early clinical diagnosis of cancer. Here, based on the preparation of heterogeneous cuprous oxide coated silver (Ag@Cu₂O) nanocomposites/graphitic carbon nitride (g-C₃N₄)/cadmium sulfide (CdS) nanoarrays structure, a highly sensitive photoelectrochemical (PEC) biosensor for the examination of carcinoembryonic antigen (CEA) has been constructed successfully. The combination of photoactive semiconductor materials g-C₃N₄ and CdS increases the electron transfer rate between them and enhances their photocurrent response, thus greatly increasing the concentration detection range. At the same time, the specific recognition between antigen and antibody is used to form a sandwich structure secondary antibody (Ab₂)/CEA/antibody (Ab₁). And because Ag@Cu₂O has the function of absorbing light and consuming electron donor. Therefore, the successful measurement of CEA was achieved by labeling Ag@Cu₂O on Ab₂ and finally immobilizing it on the sensor to correlate the current reduction with the CEA concentration. The sandwich PEC biosensor proposed by this signal amplification strategy under optimal conditions has good analytical performance for CEA, with a wide linear detection range (from 10^-5 to 1 ng/mL) and a low detection limit of 0.0011 pg/mL. The PEC biosensor constructed by this method showed high sensitivity, excellent anti-interference ability, favourable repeatability, and good stability.

Improving Photoelectrochemical Activity of ZnO/TiO2 Core–Shell Nanostructure through Ag Nanoparticle Integration

In solar energy harvesting using solar cells and photocatalysts, the photoexcitation of electrons and holes in semiconductors is the first major step in the solar energy conversion. The lifetime of carriers, a key factor determining the energy conversion and photocatalysis efficiency, is shortened mainly by the recombination of photoexcited carriers. We prepared and tested a series of ZnO/TiO2-based heterostructures in search of designs which can extend the carrier lifetime. Time-resolved photoluminescence tests revealed that, in ZnO/TiO2 core–shell structure the carrier lifetime is extended by over 20 times comparing with the pure ZnO nanorods. The performance improved further when Ag nanoparticles were integrated at the ZnO/TiO2 interface to construct a Z-scheme structure. We utilized these samples as photoanodes in a photoelectrochemical (PEC) cell and analyzed their solar water splitting performances. Our data showed that these modifications significantly enhanced the PEC performance. Especially, under visible light, the Z-scheme structure generated a photocurrent density 100 times higher than from the original ZnO samples. These results reveal the potential of ZnO-Ag-TiO2 nanorod arrays as a long-carrier-lifetime structure for future solar energy harvesting applications.