Bimetal-organic framework Cu-Ni-BTC and its derivative CuO@NiO: Construction of three environmental small-molecule electrochemical sensors

Catalytic Application of Functionalized Bimetallic-Organic Frameworks with Phosphorous Acid Tags in the Synthesis of Pyrazolo[4,3-e]pyridines

Combining two different metals for the synthesis of a metal-organic framework (MOF) is a smart strategy for the architecture of new porous materials. Herein, a bimetal-organic framework (bimetal-MOFs) based on Fe and Co metals was synthesized. Then, phosphorous acid tags were decorated on bimetal-MOFs via a postmodification method as a new porous acidic functionalized catalyst. This catalyst was used for the synthesis of pyrazolo[4,3-e]pyridine derivatives as suitable drug candidates. The present study provides new insights into the architecture of novel porous heterogeneous catalysts based on a bimetal-organic framework (bimetal-MOFs). The type of final structures of catalyst and pyrazolo[4,3-e]pyridine derivatives were determined using different techniques such as fourier transform infrared (FT-IR), X-ray diffraction (XRD), scanning electron microscopy (SEM), energy-dispersive X-ray (EDX), SEM-elemental mapping, N₂ adsorption-desorption isotherm, Barrett-Joyner-Halenda (BJH), thermogravimetry/differential thermal analysis (TG/DTA), ¹H NMR, and ¹³C NMR.

Facile Controlled Synthesis of Pd-ZnO Nanostructures for Nitrite Detection

The electrocatalytic characteristics of nanostructures are significantly affected by surface structure. The strict regulation of structural characteristics is highly beneficial for the creation of novel nanocatalysts with enhanced electrocatalytic performance. This work reports a nitrite electrochemical sensor based on novel flower-like Pd-ZnO nanostructures. The Pd-ZnO nanocatalysts were synthesized through a simple hydrothermal method, and their morphology and structure were characterized via field-emission scanning electron microscopy (FE-SEM), X-ray photoelectron spectroscopy (XPS), and X-ray diffraction (XRD). Their electrocatalytical performance in the nitrite oxidation reaction was studied via cyclic voltammetry (CV) and the amperometric technique. Compared to pure ZnO and Pd nanoparticles, the Pd-ZnO nanostructures exhibited enhanced electrochemical performance in the nitrite oxidation reaction. In order to investigate the relationships between the structures of Pd-ZnO nanocatalysts and the corresponding electrocatalytic performances, different surface morphologies of Pd-ZnO nanocatalysts were fabricated by altering the solution pH. It was found that the flower-like Pd-ZnO nanostructures possessed larger effective surface areas and faster electron transfer rates, resulting in the highest electrocatalytic performance in the nitrite oxidation reaction. The designed nitrite sensor based on flower-like Pd-ZnO displayed a wide concentration linear range of 1 μM-2350 μM, a low detection limit of 0.2 μM (S/N of 3), and high sensitivity of 151.9 μA mM^-1 cm^-2. Furthermore, the proposed sensor exhibited perfect selectivity, excellent reproducibility, and long-time stability, as well as good performance in real sample detection.

Metal-organic framework-derived porous ternary ZnCo2O4 nanoplate arrays grown on carbon cloth for simultaneous electrochemical determination of ascorbic acid, dopamine, and uric acid

Metal-organic frameworks derived from ternary metal oxide directly grown on the conductive substrate have attracted great interest in electrochemical sensing. In this work, metal-organic framework-derived ternary ZnCo₂O₄ nanoplate arrays that were grown on carbon cloth (ZnCo₂O₄ NA/CC) are fabricated and applied for the electrochemical determination of ascorbic acid (AA), dopamine (DA), and uric acid (UA). Field emission scanning electron microscope (FESEM) reveals that a network-like CC substrate is covered with considerable nanoplate arrays, presenting a large specific area. X-ray photoelectron spectroscopy (XPS) demonstrates the nanoplate arrays to be composed of ZnCo₂O₄. Benefiting from the unique array morphology and ternary element composition, the ZnCo₂O₄ NA/CC shows desirable performances for simultaneous detection of AA, DA, and UA. The individual detection limits are 7.14 μM for AA, 0.25 μM for DA, and 0.33 μM for UA. Additionally, the ZnCo₂O₄ NA/CC is successfully applied for the quantitative determination of AA, DA, and UA in spiked serum samples, showing its great application potential.

Synthesis of Good Electrical Conductivity of CoCe-BTC/PEDOT for Ultrahigh Selectivity of NO2 Detection

Metal-organic frameworks (MOFs) have broad application prospects in the development of efficient, sensitive and single select gas sensors. However, in order to construct a chemical resistance gas sensor based on MOFs, the problem of poor conductivity of MOFs must be solved. In this work, we synthesized CoCe-BTC, which based on the organic ligands of trimesic acid (H₃BTC) by the water bath method and prepared CoCe-BTC/PEDOT composite film on an interdigital electrode by the spin coating process. Compared with pure MOF material, the conductivity of CoCe-BTC/PEDOT is significantly improved. Under a dry room temperature environment and N₂ as the carrier gas, the response of the sensor to NO₂ is about 1.2 times that of pure PEDOT and has a shorter response time. It has great repeatability and selectivity and shows a dynamic response with the change of NO₂ gas concentration (5-50 ppm).

The role of MOF based nanocomposites in the detection of phenolic compounds for environmental remediation- A review

Phenolic compounds would be the emerging pollutant by 2050, because of their wide spread applicability in daily life and therefore the adoption of suitable detection methods in which identification and separation of isomers is highly desirable. Owing to the fascinating features, Metal-organic framework (MOF), a class of reticular materials holds a large surface area with tunable shape and adjustable porosity will provide strong interaction with analytes through abundant functional groups resulting in high selectivity towards electrochemical determination of phenolic isomers. Nevertheless, the sensing performance can still be further improved by building MOF network (intrinsic resistance) with functional (conducting) materials, resulting in MOF based nanocomposite. Herein, this review provides the summary of MOF based nanocomposites for electrochemical sensing of phenolic compounds developed from 2015. In this review, we discussed the demerits of pristine MOF as electrode materials, and the requirement of new class of MOF with functional materials such as nanomaterials, carbon nanotubes, graphene and MXene. The history and evolution of MOF nanocomposite-based materials are discussed and also featured the impressive physical and chemical properties. Besides this review discusses the factors influencing the conducting pathway and mass transport of MOF based nanocomposite for enhanced sensing performance of phenolic compounds with suitable mechanistic illustrations. Finally, the major challenges governing the determination of phenolic compounds and the future advancements required for the development of MOF based electrodes for various applications are highlighted.

Influence of various Cu/Fe ratios on the surface properties of green synthesized Cu-Fe-BTC and it`s relation to methylene blue adsorption

The incorporation of different percentages of Fe²⁺ into copper benzene-1,3,5-tricarboxylate (CuBTC) was successfully carried out at room-temperature synthesis with water as the only solvent. The XRD and XPS analysis shows that the Fe²⁺ were substituted into the paddlewheel structure. The incorporation of 18% Fe²⁺ into CuBTC can increase the surface area and porosity of the framework. The BET surface area of Cu₈₂Fe₁₈BTC (1240 m²/g) was significantly higher than CuBTC (708 m²/g). Further increase in the Fe²⁺ percentage will reduce the surface area of the compound. The presence of Fe²⁺ in the framework successfully disturbs the pore formation and widens the pore size on the surface of these compounds. This as well as the pH_pzc, which is related to the surface acidity of the resulting bimetallic organic framework (BMOF), play an important role in the adsorption process. Cu₅₃Fe₄₇BTC with an adsorption capacity of 94.42 mg/g shows approximately 6 times greater adsorption capacity against MB compared to CuBTC. This shows that by utilizing a different ratio of Cu and a second metal, it is possible to effectively design the surface morphology of BMOF for specific applications.

Graphene oxide–porphyrin composite nanostructure included electrochemical sensor for catechol detection

A novel composite nanostructure (GO–Por) has been prepared via ultrasonication and exhibited enhanced electrocatalytic activity towards catechol oxidation.

MWCNT-mesoporous silica nanocomposites inserted in a polyhedral metal–organic framework as an advanced hybrid material for energy storage device

Hybridizing of trimetallic HKUST-1 with mesoporous SBA/CNT is highly desirable fot the improvement of energy and power densities in supercapacitors.