An ultrasensitive electrochemiluminescence sensor based on luminol functionalized AuNPs@Fe-Co-Co nanocomposite as signal probe for glutathione determination

Solid electrochemiluminescence sensor by immobilization luminol in Zn-Co-ZIF CNFs for sensitive detection of procymidone in vegetables

A solid-state electrochemiluminescence (ECL) sensor was fabricated by immobilizing luminol, a classical luminescent reagent, on a Zn-Co-ZIF carbon fiber-modified electrode for the rapid and sensitive detection of procymidone (PCM) in vegetable samples. The sensor was created by sequentially modifying the glassy carbon electrode with Zn-Co-ZIF carbon fiber (Zn-Co-ZIF CNFs), Pt@Au NPs, and luminol. Zn-Co-ZIF CNFs, prepared through electrospinning and high-temperature pyrolysis, possessed a large specific surface area and porosity, making it suitable as carrier and electron transfer accelerator in the system. Pt@Au NPs demonstrated excellent catalytic activity, effectively enhancing the generation of active substances. The ECL signal was significantly amplified by the combination of Zn-Co-ZIF CNFs and Pt@Au NPs, which can subsequently be diminished by procymidone. The ECL intensity decreased proportionally with the addition of procymidone, displaying a linear relationship within the concentration range 1.0 × 10-13 to 1.0 × 10-6 mol L-1 (R2 = 0.993). The sensor exhibited a detection limit of 3.3 × 10-14 mol L-1 (S/N = 3) and demonstrated outstanding reproducibility and stability, making it well-suited for the detection of procymidone in vegetable samples.

Development of reusable electrochemiluminescence sensing microchip for detection of vomitoxin

In this work, a reusable DNA sensing microchip was developed for detection of vomitoxin (deoxynivalenol, DON) in sorghum using Cd-based core-shell CdSe@CdS quantum dots (QDs) as promising electrochemiluminescence (ECL) emitter. The size-adjustable aqueous phase CdSe@CdS QDs were prepared through homogeneous method, exhibiting strong cathodic ECL emission with a central wavelength of 520 nm in S2O82- coreactant. And gold nanoparticles-modified iron cobalt cyanide hydrate (Fe-Co-Au) was introduced as an accelerator to amplify the ECL signal. ECL signal was quenched after the formation of a double-stranded (dsDNA) S1-S2 by generating an electron transfer system between the emitter and ferrocene (Fc), which are modified on the aptamer (ssDNA S1) and its complement sequence (ssDNA S2), respectively. When the target DON is presence, the aptamer ssDNA S1 will bind to the DON and trigger the unbinding of double strands DNA and the release of the ssDNA S2, thus the signal can be generated. This approach offers a feasible method for the detection of DON within the range of 1 ng/mL to 200 ng/mL.

A Novel Signal-On Electrochemiluminescence Immunosensor for the Detection of NSCLC Antigen Biomarker Based on New Co-Reaction Accelerators

Non-small cell lung cancer (NSCLC) is the most common type of lung cancer with substantial morbidity and mortality. Herein, a new signal-on electrochemiluminescence (ECL) immunosensor based on multiple amplification strategies is constructed for ultrasensitive detection of cytokeratin 19 fragment antigen 21-1 (CYFRA21-1) biomarker related to NSCLC. Polyethyleneimine (PEI) functionalized MXene is decorated with NiMn layer double hydroxide (NiMn LDH) to form MXene-PEI-NiMn LDH composite. Specially, the La-MOF@ZIF-67 bimetallic organic framework (named as LZBM) and MXene-PEI-NiMn LDH both served as coreaction accelerators to improve the ECL emission of the luminol-H₂ O₂ system. To be specific, Au nanoparticles (AuNPs) coated MXene-PEI-NiMn LDH is applied to immobilize primary CYFRA21-1 antibody (Ab₁ ), while AuNPs decorated LZBM was used for the loading of luminol and secondary CYFRA21-1 antibody (Ab₂ ) to form tracer label. Therefore, the ECL signal of the sandwich-type immunosensor is significantly enhanced due to the high loading capability for luminol and the synergistic catalytic ability for the decomposition of H₂ O₂ into reactive oxygen species (ROS). Under the optimal experimental conditions, the ECL immunosensor exhibited good analytical performances for CYFRA21-1 detection with a wide linear range (100 fg mL^-1 -100 ng mL^-1 ) and a low limit of detection (85.20 fg mL^-1 ), providing a promising method for early diagnosis of NSCLC.

Boosting the electrochemiluminescence of luminol by high-intensity focused ultrasound pretreatment combined with 1T/2H MoS2 catalysis to construct a sensitive sensing platform

In the luminol-O₂ ECL system, O₂ as an endogenous coreactant has the advantages of non-toxicity and stability. Improving the efficiency to generate radicals of O₂ is a challenge currently. In this work, a strategy combining physical method - ultrasound and nanomaterial with unique physicochemical properties was designed to enhance the ECL signal of luminol-O₂ system. Specifically, high-intensity focused ultrasound (HIFU) pretreatment as a non-invasive method could generate ROS (H₂O₂, O₂^•-, OH•, ¹O₂) in situ, triggering and boosting the ECL signal of luminol. In addition, 1T/2H MoS₂ with excellent catalytic activity could catalyze the H₂O₂ produced in situ, accelerate the oxidation of luminol and further enhance the ECL response. At the same time, combined with the catalytic hairpin assembly (CHA) reaction, the constructed ECL biosensing platform showed excellent performance for the detection of miRNA-155. The concentration range of 0.1 fM ∼ 1 nM with the detection limit as low as 0.057 fM were obtained. Furthermore, the ECL biosensor was also successfully applied to the determination of miRNA-155 in human serum samples. The established ECL sensing platform opens up a promising method for the detection of clinical biomarkers.

Self-enhanced electrochemiluminescence of luminol induced by palladium-graphene oxide for ultrasensitive detection of aflatoxin B1 in food samples

In this work, a novel and credible electrochemiluminescence immunoassay (ECLIA) was constructed for the ultrasensitive and highly selective detection of aflatoxin B₁ (AFB₁). Amino-functionalized 3D graphene hydrogel (NGH) served as the ECL platform with the self-enhanced ECL of luminol-palladium-graphene oxide (lum-Pd-GO) acting as a marker for the antibodies against AFB₁. Pd-GO was synthesized by a self-redox method; it promotes the formation of reactive oxygen species, which are important to the ECL of luminol, from dissolved oxygen. The π-π conjunction between luminol and GO shortens their electron transfer distance, resulting in an amplified ECL signal (∼8.5 times larger than conventional luminol ECL). Moreover, 3D NGH, with its good conductivity, large surface area, and sufficient amino groups, was used to anchor gold nanoparticles (AuNPs), which subsequently immobilized bovine serum albumin (BSA)-AFB₁ through Au-S bonds. The resultant, competitive ECLIA gave a relative low detection limit of 5 × 10^-3 μg kg^-1 and exhibited a broad linear relationship over the range of 0.05-50 μg kg^-1. Finally, the proposed ECLIA was successfully used to analyze AFB₁ contents in food samples. ECLIA: electrochemiluminescence immunoassay; AFs: Aflatoxins; HPLC: high-performance liquid chromatography.

A Sensitive Signal-on Supersandwich DNA Biosensor Based on the Enhancement of Poly(aniline-luminol) Nanowires Electrochemiluminescence by Ferrocene

A signal-on supersandwich type of electrochemiluminescence (ECL) DNA biosensor was developed based on the poly(aniline-luminol) nanowires (PALNWs) modified electrode and enhancement of ferrocene (Fc) on ECL of luminol. Aminated capture DNA was covalently linked to the PALNWs on the electrode surface by the crosslinking of glutaraldehyde. In presence of target DNA, its 3' terminus hybridizes with the capture probe and the 5' terminus hybridizes with ferrocene labeled DNA (Fc-DNA) to form a long DNA concatamer supersandwich structure. The ECL intensity of the prepared biosensor was clearly improved by increasing the concentration of target DNA due to the enhancement of ferrocene on luminol ECL. The difference of the ECL intensity in the absence and presence of target DNA was used to monitor the hybridization event. The difference of ECL linearly increased with the logarithm of target DNA concentration in the range from 1.0  ×  10^-16 - 1.0  ×  10^-8 mol L^-1 with a detection limit of 5.8  ×  10^-17 mol L^-1. The sensor had high sensitivity and wide linear relationship for the detection of target DNA.

A novel metal organic gel with superior oxidase-like activity for efficient and sensitive chemiluminescence detection of uric acid

It is found that MIL-100(Fe) gels, as a kind of metal-organic gels (MOGs), constitutting of iron (Fe³⁺) and trimesic acid (H₃BTC), has been regarded as the efficient catalyst of luminol chemiluminescence (CL) system without the presence of extra oxidants in the present work. MIL-100(Fe) gels that have possessed mimicking oxidase-like activity can excellently enhanced luminol CL intensity by accelerating the generation of reactive oxygen species. Furthermore, with the addition of uric acid (UA), the CL signal has been dramatically inhibited under alkaline condition. Hence, the CL intensity inhibiting ratio (I₀/I_S) was proportional to the increasing concentration of UA in the rang from 10 nM to 4000 nM with the detection limit of 5.9 nM. This method has been successfully applied for analysis of UA with acceptable recoveries ranging from 97.0% to 107.9% in urine sample. These results indicates that this study open up a novel, sensitive and convenient method to detect UA in biological samples.