Microbial electrochemical biosensor for rapid detection of naphthenic acid in aqueous solution

The exploitation of bio-electrochemical system and microplastics removal: Possibilities and perspectives

Microplastic (MP) pollution has caused severe concern due to its harmful effect on human beings and ecosystems. Existing MP removal methods face many obstacles, such as high cost, high energy consumption, low efficiency, release of toxic chemicals, etc. Thus, it is crucial to find appropriate and sustainable methods to replace common MP removal approaches. Bio-electrochemical system (BES) is a sustainable clean energy technology that has been successfully applied to wastewater treatment, seawater desalination, metal removal, energy production, biosensors, etc. However, research reports on BES technology to eliminate MP pollution are limited. This paper reviews the mechanism, hazards, and common treatment methods of MP removal and discusses the application of BES systems to improve MP removal efficiency and sustainability. Firstly, the characteristics and limitations of common MP removal techniques are systematically summarized. Then, the potential application of BES technology in MP removal is explored. Furthermore, the feasibility and stability of the potential BES MP removal application are critically evalauted while recommendations for further research are proposed.

Study of the influence of nanoscale porosity on the microbial electroactivity between expanded graphite electrodes and Geobacter sulfurreducens biofilms

Expanded graphite (EG) electrodes gather several advantages for their utilization in microbial electrochemical technologies (MET). Unfortunately, the low microbial electroactivity makes them non-practical for implementing them as electrodes. The objective of this work is to explore the enhancement of microbial electroactivity of expanded graphite (commercial PV15) through the generation of nanopores by CO2 treatment. The changes in properties were thoroughly analysed by TG, XRD, Raman, XPS, gas adsorption, SEM and AFM, as well as microbial electroactivity in the presence of Geobacter sulfurreducens. Nanopores remarkably enhance the microbially derived electrical current (60-fold increase). Given the inaccessibility of micron-sized bacteria to these nanopores, it is suggested that the electric charge exchanged by electroactive microorganisms might be greatly affected by the capability of the electrode to compensate these charges through ion adsorption. The increased microbial current density produced on activated PV15 opens the possibility of using such materials as promising electrodes in MET.

Recent Developments and Applications of Microbial Electrochemical Biosensors

This chapter provides a comprehensive overview of microbial electrochemical biosensors, which are a unique class of biosensors that utilize the metabolic activity of microorganisms to convert chemical signals into electrical signals. The principles and mechanisms of these biosensors are discussed, including the different types of microorganisms that can be used. The various applications of microbial electrochemical biosensors in fields such as environmental monitoring, medical diagnostics, and food safety are also explored. The chapter concludes with a discussion of future research directions and potential advancements in the field of microbial electrochemical biosensors.

Exploring the biocapacitance in M3C-based biosensors for the assessment of microbial activity and organic matter

Reliable monitoring of microbial and water quality parameters in freshwater ecosystems (either natural or human-made) is of capital importance for improving both the management of water resources and the assessment of microbially-driven bio-geo-chemical processes. In this context, bioelectrochemical systems (BES), such as microbial three-cell electrodes (M3C), are very promising devices for their use as biosensors. However, current experiences on the use of BES-based devices for biosensing purposes are almost exclusively limited to water-saturated environments. This limitation hampers the use of this technology for a wider range of applications where the biosensor may work discontinuously (such as discontinuously saturated ecosystems). Discontinuous operation of M3C-based biosensors creates an electric current peak immediately after the reconnection of the system due to electron accumulation, in a process known as biocapacitance. The present work aimed at quantifying the bioindication potential of biocapacitance for the assessment of key ecosystem parameters such as microbial metabolic activity and biomass, as well as organic matter concentration. Significant linear regression coefficients (R2 > 0.9) were found for all combinations of parameters tested. Moreover, for most of the ecological parameters assessed, an electric charge accumulation of 1-5 min (biocapacitance elapsed time) and discharge of 5 min was enough to get reliable information. In conclusion, we have demonstrated for the first time that biocapacitance in M3C-based biosensors can be used as a proxy parameter for the assessment of microbial activity, microbial biomass and organic matter concentration in a model nature-based ecosystem.

Intermittent energization improves microbial electrolysis cell-assisted thermophilic anaerobic co-digestion of food waste and spent mushroom substance

Microbial electrolysis cell-assisted thermophilic anaerobic digestion (MEC-TAD) is a promising method to improve anaerobic co-digestion efficiency; however, its application is restricted by high energy consumption. To improve the energy use efficiency of MEC-TAD, this study investigated the effect of different intermittent energization strategies on thermophilic co-digestion performance. Results revealed that an 18 h-ON/6h-OFF energization schedule resulted in the fastest electron transfer rate and the highest methane yield (364.3 mL/g VS). Mechanistic analysis revealed that 18 h-ON/6h-OFF resulted in the enrichment of electroactive microorganisms and increased abundance of enzyme-coding genes associated with energy metabolism (ntp, nuo, atp), electron transfer (pilA, nfrA2, ssuE), and the hydrogenotrophic methanogenic pathway. Finally, energy balance analysis revealed that 18 h-ON/6h-OFF had the highest net energy benefit (2.52 kJ) and energy conversion efficiency (110.76 %). Therefore, intermittent energization of MEC-TAD using an 18 h-ON/6h-OFF schedule can provide improved performance and more energy savings.

Enhancing quorum sensing in biofilm anode to improve biosensing of naphthenic acids

The feasibility of enhancing quorum sensing (QS) in anode biofilm to improve the quantifications of commercial naphthenic acid concentrations (9.4-94 mg/L) in a microbial electrochemical cell (MXC) based biosensor was demonstrated in this study. First, three calibration methods were systematically compared, and the charging-discharging operation was selected for further experiments due to its 71-227 folds higher electrical signal outputs than the continuous closed-circuit operation and cyclic voltammetry modes. Then, the addition of acylase (5 μg/L) as an exogenous QS autoinducer (acylase) was investigated, which further improved the biosensor's electrical signal output by ∼70%, as compared to the control (without acylase). The addition of acylase increased the relative expression of QS-associated genes (lasR, lasI, rhlR, rhlI, lasA, and luxR) by 7-100%, along with increased abundances of known electroactive bacterial genera, such as Geobacter (from 42% to 47%) and Desulfovibrio (from 6% to 11%). Furthermore, toxicities of different NAs concentrations measured with the Microtox bioassay test were correlated with corresponding electrical signals, indicating that MXC-biosensor can provide a dual platform for rapid assessment of both NA concentrations and NA-associated toxicity.

A multi-perspective review on microbial electrochemical technologies for food waste valorization

The worldwide generation of food waste (FW) has been increasing enormously due to the growing food industry and population. However, FW contains a large amount of biodegradable organics that can be converted to clean energy, which can potentially minimize the utilization of fossil fuels. Conventional biowaste valorization technologies, such as anaerobic digestion and composting, have been adopted for FW management for recovering useful biogas and compost. However, they are often limited by high capital and operation costs, low recovery efficiency, slow process kinetics, and system instability. On the other hand, microbial electrochemical technologies (METs) have been highly promising for efficiently harvesting bioenergy and high value-added products from FW. Hence, this article critically reviews up-to-date studies on applying various METs regarding their value-added products recovery efficiencies from FW. Moreover, this review lists existing challenges, ways to optimize the system performance and provides perspectives on future research needs.

Paper-based platforms for microbial electrochemical cell-based biosensors: A review

The development of low-cost analytical devices for on-site water quality monitoring is a critical need, especially for developing countries and remote communities in developed countries with limited resources. Microbial electrochemical cell-based (MXC) biosensors have been quite promising for quantitative and semi-quantitative (often qualitative) measurements of various water quality parameters due to their low cost and simplicity compared to traditional analytical methods. However, conventional MXC biosensors often encounter challenges, such as the slow establishment of biofilms, low sensitivity, and poor recoverability, making them unable to be applied for practical cases. In response, MXC biosensors assembled with paper-based materials demonstrated tremendous potentials to enhance sensitivity and field applicability. Furthermore, the paper-based platforms offer many prominent features, including autonomous liquid transport, rapid bacterial adhesion, lowered resistance, low fabrication cost (<$1 in USD), and eco-friendliness. Therefore, this review aims to summarize the current trend and applications of paper-based MXC biosensors, along with critical discussions on their field applicability. Moreover, future advancements of paper-based MXC biosensors, such as developing a novel paper-based biobatteries, increasing the system performance using an unique biocatalyst, such as yeast, and integrating the biosensor system with other advanced tools, such as machine learning and 3D printing, are highlighted.

From Microorganism-Based Amperometric Biosensors towards Microbial Fuel Cells

This review focuses on the overview of microbial amperometric biosensors and microbial biofuel cells (MFC) and shows how very similar principles are applied for the design of both types of these bioelectronics-based devices. Most microorganism-based amperometric biosensors show poor specificity, but this drawback can be exploited in the design of microbial biofuel cells because this enables them to consume wider range of chemical fuels. The efficiency of the charge transfer is among the most challenging and critical issues during the development of any kind of biofuel cell. In most cases, particular redox mediators and nanomaterials are applied for the facilitation of charge transfer from applied biomaterials towards biofuel cell electrodes. Some improvements in charge transfer efficiency can be achieved by the application of conducting polymers (CPs), which can be used for the immobilization of enzymes and in some particular cases even for the facilitation of charge transfer. In this review, charge transfer pathways and mechanisms, which are suitable for the design of biosensors and in biofuel cells, are discussed. Modification methods of the cell-wall/membrane by conducting polymers in order to enhance charge transfer efficiency of microorganisms, which can be potentially applied in the design of microbial biofuel cells, are outlined. The biocompatibility-related aspects of conducting polymers with microorganisms are summarized.

The Use of Electroactive Halophilic Bacteria for Improvements and Advancements in Environmental High Saline Biosensing

Halophilic bacteria are remarkable organisms that have evolved strategies to survive in high saline concentrations. These bacteria offer many advances for microbial-based biotechnologies and are commonly used for industrial processes such as compatible solute synthesis, biofuel production, and other microbial processes that occur in high saline environments. Using halophilic bacteria in electrochemical systems offers enhanced stability and applications in extreme environments where common electroactive microorganisms would not survive. Incorporating halophilic bacteria into microbial fuel cells has become of particular interest for renewable energy generation and self-powered biosensing since many wastewaters can contain fluctuating and high saline concentrations. In this perspective, we highlight the evolutionary mechanisms of halophilic microorganisms, review their application in microbial electrochemical sensing, and offer future perspectives and directions in using halophilic electroactive microorganisms for high saline biosensing.

An intermittent power supply scheme to minimize electrical energy input in a microbial electrolysis cell assisted anaerobic digester

From the perspective of energy saving in the operation of microbial electrolysis cell assisted anaerobic digester (MEC-AD), this study focused on developing an intermittent power supply scheme. The applied potential was switched off for 12 and 6 hours/day during the operation of a laboratory-scale MEC-AD system fed with glucose. The results from the operation under continuous applied potential served as the control. The overall biomethane generation and net energy income from the process were unaffected when the applied potential turned off for 6 hours/day. Both quantitative and qualitative analyses of microbial communities suggested that a balanced microbiome could be maintained under short-term switching-off the applied potential. However, performance substantially deteriorated when the applied potential turned off for 12 hours/day. Overall, the results of this study suggest that MEC-AD operation does not need a continuous power supply, and higher energy efficiency can be effectively achieved by intermittently powering the reactor.

A conceptual framework modeling of functional microbial communities in wastewater treatment electro-bioreactors

Understanding the microbial ecology of a system allows linking members of the community and their metabolic functions to the performance of the wastewater bioreactor. This study provided a comprehensive conceptual framework for microbial communities in wastewater treatment electro-bioreactors (EBRs). The model was based on data acquired from monitoring the effect of altering different bioreactor operational parameters, such as current density and hydraulic retention time, on the microbial communities of an EBR and its nutrient removal efficiency. The model was also based on the 16S rRNA gene high-throughput sequencing data analysis and bioreactor efficiency data. The collective data clearly demonstrated that applying various electric currents affected the microbial community composition and stability and the reactor efficiency in terms of chemical oxygen demand, N and P removals. Moreover, a schematic that recommends operating conditions that are tailored to the type of wastewater that needs to be treated based on the functional microbial communities enriched at specific operating conditions was suggested. In this study, a conceptual model as a simplified representation of the behavior of microbial communities in EBRs was developed. The proposed conceptual model can be used to predict how biological treatment of wastewater in EBRs can be improved by varying several operating conditions.