Construction of MOF/TiO2 nanocomposites with efficient visible-light-driven photocathodic protection

Nanoscale designing of metal organic framework moieties as efficient tools for environmental decontamination

Environmental pollutants, being a major and detrimental component of the ecological imbalance, need to be controlled. Serious health issues can get intensified due to contaminants present in the air, water, and soil. Accurate and rapid monitoring of environmental pollutants is imperative for the detoxification of the environment and hence living beings. Metal-organic frameworks (MOFs) are a class of porous and highly diverse adsorbent materials with tunable surface area and diverse functionality. Similarly, the conversion of MOFs into nanoscale regime leads to the formation of nanometal-organic frameworks (NMOFs) with increased selectivity, sensitivity, detection ability, and portability. The present review majorly focuses on a variety of synthetic methods including the ex situ and in situ synthesis of MOF nanocomposites and direct synthesis of NMOFs. Furthermore, a variety of applications such as nanoabsorbent, nanocatalysts, and nanosensors for different dyes, antibiotics, toxic ions, gases, pesticides, etc., are described along with illustrations. An initiative is depicted hereby using nanostructures of MOFs to decontaminate hazardous environmental toxicants.

Growth of 3D-TNAs@Ti-MOFs by dual titanium source strategy with enhanced photoelectrocatalytic/photoelectro-Fenton performance for degradation of tetracycline under visible light irradiation

Visible-light-active 3D-TNAs@Ti-MOFs composite electrodes were fabricated by decorating nanoscaled Ti-based metal-organic frameworks on three-dimensional TiO₂ nanotube arrays (3D-TNAs) prepared by a facile in situ solvothermal method. The photoelectrocatalytic performance of electrode materials was evaluated by degradation of tetracycline (TC) under visible light irradiation. The experiment results show that Ti-MOFs nanoparticles are highly distributed on the top and side walls of TiO₂ nanotubes. The 3D-TNAs@NH₂-MIL-125 solvothermally synthesized for 30 h exhibited the best photoelectrochemical performance compared with 3D-TNAs@MIL-125 and pristine 3D-TNAs. In order to further enhance the degradation efficiency of TC by 3D-TNAs@NH₂-MIL-125, a photoelectro-Fenton (PEF) system was constructed. The influence of H₂O₂ concentration, solution pH and applied bias potential on TC degradation were explored. The results showed that when pH was 5.5, H₂O₂ concentration was 30 mM, and applied bias was 0.7 V, the degradation rate of TC was 24% higher than the pure photoelectrocatalytic degradation process. The enhanced photoelectro-Fenton performance of 3D-TNAs@NH₂-MIL-125 could be attributed to the large specific surface area, excellent light utilization, efficient interfacial charge transfer, low electron-hole recombination rate and high production of ˙OH as the result of the synergistic effect between TiO₂ nanotubes and NH₂-MIL-125.

Optimization of PEC and photocathodic protection performance of TiO2/CuInS2heterojunction photoanodes

The establishment of heterojunction is a powerful strategy to enhance the photoresponse performance of photoanode. Here, TiO₂/CuInS₂(T/CIS) composites were prepared via a two-step hydrothermal method, and their morphologies were controlled by adjusting the reaction time. The absorption spectra show that CuInS₂can significantly improve the absorption of visible light. The T/CIS2 (2 h reaction time) photoanode exhibited the most outstanding photoelectrochemical (PEC) performance, with a photocurrent density of 168% that of the pure TiO₂photoanode. Under simulated sunlight, this photoanode can supply a protective photocurrent of 0.49 mA cm^-2and a protective voltage of 0.36 V to stainless steel (304ss), which are about 4 and 2 times those of the TiO₂sample. The enhancement in the photocathodic protection performance is attributed to enlarged visible light absorbance and higher charge separation rate. This study demonstrates that the TiO₂/CuInS₂photoanode is a promising candidate for application in photoinduced cathodic protection of metallic materials.

Advancements in visible light responsive MOF composites for photocatalytic decontamination of textile wastewater: A review

Heterogeneous photocatalysis using metal-organic frameworks (MOFs) is expected to provide a pivotal solution for the remediation of toxic dyes and heavy metals from textile wastewater. However, MOFs often suffer from a low removal efficiency, due to the rapid recombination between holes and electrons, generated upon photoexcitation. Additionally, the MOFs exhibit poor water stability, which restricts their large-scale application. In this regard, various approaches (i.e. doping of metal nanoparticle, semiconductor, quantum dot, and ligand functionalization) have been adopted for the formation of multifunctional composites. The MOF-composites possess suitable photochemical, surface, optical, and electronic properties, resulting in enhanced water stability, visible light absorption, and reduced recombination between photogenerated species. This comprehensive review targets to provide an insight into the synthesis and subsequent application of various MOF composites for photocatalytic removal of organic contaminants (dyes) and inorganic (Cr(VI)) contaminants from water. MOFs/graphene oxide composites possess improved surface area and reusability whereas noble metal incorporated MOFs composites suffer from photocorrosion and are relatively costly. Zr and Ti based MOFs exhibit tuning from UV to visible light response and surpass the poor water stability upon binary/ternary composite formation. The role of the dopants in enhancing the efficiency of the composites; the effect of influencing factors such as solution pH, pollutant concentration; the mechanism, and the kinetics of reactions have been outlined. In spite of many advancements, the article also summarizes some roadblocks that need to be unraveled to achieve the energy-water-environment nexus and scope for future breakthrough research in this field.

The Preparation of g-C3N4/CoAl-LDH Nanocomposites and Their Depollution Performances in Cement Mortars under UV-Visible Light

In this study, new organic-inorganic g-C3N4/CoAl-LDH nanocomposites were prepared and introduced to fabricate photocatalytic cement mortars by internal mixing, coating, and spraying. The photocatalytic depollution of both g-C3N4/CoAl-LDH and cement mortars was assessed by NOx degradation reaction under UV-visible light irradiation. The study results suggested that the degradation efficiency of g-C3N4/CoAl-LDH nanocomposites improved with an increase in g-C3N4 content. The g-C3N4/CoAl-LDH1.5 nanocomposite displayed the highest NOx degradation capacity, which was about 1.23 and 3.21 times that of pure g-C3N4 and CoAl-LDH, respectively. The photocatalytic cement mortars which were all fabricated using different approaches could effectively degrade the target pollutants and exhibited significant compatibility between g-C3N4/CoAl-LDH and cementitious substrate. Among them, the coated mortars showed strong resistance to laboratory-simulated wearing and abrasion with a small decrease in degradation rate.