Facial synthesis of highly efficient non-enzymatic glucose sensor based on vertically aligned Au-ZnO NRs

ZnO Nanorods Aligned in a Vertical Configuration for Targeted Electrochemical Detection of Aniline

This study demonstrates the synthesis of 1D surface vertically aligned nanorods of ZnO on the fluorine-doped tin oxide-coated glass substrate (ZnO-VANRs/FTOs) synthesized via a chemical route for the targeted electrochemical sensing of aniline. The ZnO-VANRs/FTOs were 1.57 ± 0.03 μm in length with excellent crystallinity and high density (1.52 × 1013 rod no./m2). ZnO-VANRs formation increased surface roughness by 2.4- and 4.7-fold compared to the bare FTOs and seeded FTOs (ZnO-seed/FTOs), respectively. The ZnO-VANRs/FTOs electrodes could increase the effective surface area from 0.154 to 0.384 cm2 with about 86.85% reduction in charge transfer resistance compared to the bare FTOs. The peak current response (at 0.281 V vs Ag/AgCl) of aniline deposition was boosted by 81.52% with the rise in temperature from 15 to 45 °C. The reduction of aniline at ZnO-VANRs/FTOs involved a reversible two-electron diffusion control process with a heterogeneous reaction rate constant (k0) of 1.82 s-1 and a formal potential (E0) of 0.289 V vs Ag/AgCl. The ZnO-VANRs/FTOs electrode showed limits of detection of 0.193 μM (sensitivity 0.198 μA·μM-1·cm-2) and 0.588 μM (sensitivity of 0.065 μA·μM-1·cm-2) between the working ranges of 0-20 and 20-160 μM, respectively. The fabricated sensor was unprecedently selective toward aniline sensing, and p-nitroaniline, chlorobenzene, chlorpyrifos, Cu2+, Pb2+, Ni2+, Cd2+, albumin bovine, Escherichia coli, and ciprofloxacin could not interfere with aniline sensing and its sensitivity. However, the peak current was marginally decayed by 2.63% up to the 6th cycle. Moreover, ZnO-VANRs/FTOs catalyzed the sensing of aniline spiked in the environmental matrices, conforming well to liquid chromatography.

Advancing Diabetes Management: The Future of Enzyme-Less Nanoparticle-Based Glucose Sensors-A Review

BACKGROUND

Glucose is vital for biological processes, requiring blood sugar levels to be maintained between 3.88 and 6.1 mmol/L, especially during fasting. Elevated levels signal diabetes, a global concern affecting 537 million people, necessitating effective glucose-monitoring devices.

METHOD

Enzyme-based sensors, though selective, are sensitive to environmental factors. Nonenzymatic sensors, especially those with nanoparticles, offer stability, high surface area, and cost-effectiveness. Existing literature supports their immediate glucose oxidation, showcasing exceptional sensitivity.

RESULTS

This review details nonenzymatic sensors, highlighting materials, detection limits, and the promise of nanoparticle-based designs, which exhibit enhanced sensitivity and selectivity in glucose detection.

CONCLUSION

Nanoparticle-based sensors, as reviewed, show potential for glucose monitoring, overcoming enzyme-based limitations. The conclusion suggests future directions for advancing these sensors, emphasizing ongoing innovation in this critical research area.

Ag-Decorated Vertically Aligned ZnO Nanorods for Non-Enzymatic Glucose Sensor Applications

The non-enzymatic glucose sensing response of pure and Ag-decorated vertically aligned ZnO nanorods grown on Si substrates was investigated. The simple low-temperature hydrothermal method was employed to synthesize the ZnO NRs on the Si substrates, and then Ag decoration was achieved by sputtering. The crystal structure and surface morphologies were characterized by X-ray diffraction, field-emission scanning electron microscopy (FESEM), and transmission electron microscopy (TEM). The Ag incorporation on the ZnO NR surfaces was confirmed using EDS mapping and spectra. Furthermore, the chemical states, the variation in oxygen vacancies, and the surface modifications of Ag@ZnO were investigated by XPS analysis. Both the glucose/ZnO/Si and glucose/Ag@ZnO/Si device structures were investigated for their non-enzymatic glucose sensing performances with different glucose concentrations. Based on EIS measurements and amperometric analysis, the Ag@ZnO-NR-based glucose sensor device exhibited a better sensing ability with excellent stability over time than pure ZnO NRs. The Ag@ZnO NR glucose sensor device recorded 2792 µA/(mM·cm²) sensitivity with a lowest detection limit of 1.29 µM.

Novel Synthesis of Sensitive Cu-ZnO Nanorod-Based Sensor for Hydrogen Peroxide Sensing

We aimed to synthesize sensitive electrochemical sensors for hydrogen peroxide sensing by using zinc oxide nanorods grown on a fluorine-doped tin oxide electrode by using the facial hydrothermal method. It was essential to keep the surface morphology of the material (nanorods structure); due to its large surface area, the concerned material has enhanced detection ability toward the analyte. The work presents a non-enzymatic H₂O₂ sensor using vertically grown zinc oxide nanorods on the electrode (FTO) surfaces with Cu nanoparticles deposited on zinc oxide nanorods to enhance the activity. Scanning electron microscopy (SEM), X-ray photoelectron spectroscopy (XPS), energy-dispersive X-Ray (EDX), X-ray diffraction (XRD), and electrochemical methods were used to characterize copper–zinc oxide nanorods. In addition to the high surface area, the hexagonal Cu-ZnO nanorods exhibited enhanced electrochemical features of H₂O₂ oxidation. Nanorods made from Cu-ZnO exhibit highly efficient sensitivity of 3415 μAmM⁻¹cm⁻² low detection limits (LODs) of 0.16 μM and extremely wide linear ranges (0.001–11 mM). In addition, copper-zinc oxide nanorods demonstrated decent reproducibility, repeatability, stability, and selectivity after being used for H₂O₂ sensing in water samples with an RSD value of 3.83%. Cu nanoparticles decorated on ZnO nanorods demonstrate excellent potential for the detection of hydrogen peroxide, providing a new way to prepare hydrogen peroxide detecting devices.

A dual-functional flexible sensor based on defects-free Co-doped ZnO nanorods decorated with CoO clusters towards pH and glucose monitoring of fruit juices and human fluids

Herein, ZnO nanorods were doped with Co and decorated with CoO clusters through an in situ technique to create a CoO/Co-doped ZnO (CO/CZO) heterostructure at low temperatures (150 °C) on a flexible PET substrate. In the CO/CZO heterostructure, the Co dopant has a low energy barrier to substitute Zn atoms and adsorb over oxygen atoms and their vacancies. Therefore, it decreased the charge density (ND = 2.64 × 1019 cm-3) on non-active sites of ZnO and lowered the charge transfer resistance (317 Ω) at Co-doped-ZnO/electrolyte interface by suppressing the native defects and reducing the Schottky barrier height (- 0.35 eV), respectively. Furthermore, CoO clusters induced a p-n heterostructure with Co-doped ZnO, prevented corrosion, increased the active sites for analyte absorption, and increased the ultimate tensile strength (4.85 N m-2). These characteristics enabled the CO/CZO heterostructure to work as a highly sensitive, chemically stable, and flexible pH and glucose oxidation electrode. Therefore, CO/CZO heterostructure was explored for pH monitoring in human fluids and fruit juices, demonstrating a near-Nernst-limit pH sensitivity (52 mV/pH) and fast response time (19 s) in each human fluid and fruit juice. Also, it demonstrated high sensitivity (4656 µM mM-1 cm-2), low limit of detection (0.15 µM), a broad linear range (0.04 mM to 8.85 mM) and good anti-interference capacity towards glucose-sensing. Moreover, it demonstrated excellent flexibility performances, retained 53% and 69% sensitivity of the initial value for pH and glucose sensors, respectively, after 500 bending, stretching, and warping cycles.

Recent Advances in Non-Enzymatic Glucose Sensors Based on Metal and Metal Oxide Nanostructures for Diabetes Management- A Review

There is an undeniable growing number of diabetes cases worldwide that have received widespread global attention by many pharmaceutical and clinical industries to develop better functioning glucose sensing devices. This has called for an unprecedented demand to develop highly efficient, stable, selective, and sensitive non-enzymatic glucose sensors (NEGS). Interestingly, many novel materials have shown the promising potential of directly detecting glucose in the blood and fluids. This review exclusively encompasses the electrochemical detection of glucose and its mechanism based on various metal-based materials such as cobalt (Co), nickel (Ni), zinc (Zn), copper (Cu), iron (Fe), manganese (Mn), titanium (Ti), iridium (Ir), and rhodium (Rh). Multiple aspects of these metals and their oxides were explored vis-à-vis their performance in glucose detection. The direct glucose oxidation via metallic redox centres is explained by the chemisorption model and the incipient hydrous oxide/adatom mediator (IHOAM) model. The glucose electrooxidation reactions on the electrode surface were elucidated by equations. Furthermore, it was explored that an effective detection of glucose depends on the aspect ratio, surface morphology, active sites, structures, and catalytic activity of nanomaterials, which plays an indispensable role in designing efficient NEGS. The challenges and possible solutions for advancing NEGS have been summarized.