Effect of sintering temperature on the electrochemical performance of Li-rich Mn-basfed cathode material Li1.2Mn0.54Ni0.13Co0.13O2 by co-precipitation method

Achieving structural stability and enhanced electrochemical performance through Nb-doping into Li- and Mn-rich layered cathode for lithium-ion batteries

Although Li- and Mn-rich layered oxides are attractive cathode materials possessing high energy densities, they have not been commercialized owing to voltage decay, low rate capability, poor capacity retention, and high irreversible capacity in the first cycle. To circumvent these issues, we propose a Li_1.2Ni_0.13Co_0.13Mn_0.53Nb_0.01O₂ (Nb-LNCM) cathode material, wherein Nb doping strengthens the transition metal oxide (TM-O) bond and alleviates the anisotropic lattice distortion while stabilizing the layered structure. During long-term cycling, maintaining a wider LiO₆ interslab thickness in Nb-LNCM creates a favorable Li⁺ diffusion path, which improves the rate capability. Moreover, Nb doping can decrease oxygen loss, suppress the phase transition from layered to spinel and rock-salt structures, and relieve structural degradation. Nb doping results in less capacity contributions of Mn and Co and more reversible Ni and O redox reactions compared to pristine Li_1.2Ni_0.133Co_0.133Mn_0.533O₂ (LNCM), which significantly mitigates the voltage decay (Δ0.289 and Δ0.516 V for Nb-LNCM and LNCM, respectively) and ensures stable capacity retention (82.7 and 70.3% for Nb-LNCM and LNCM, respectively) during the initial 100 cycles. Our study demonstrates that Nb doping is an effective and practical strategy to enhance the structural and electrochemical integrity of Li- and Mn-rich layered oxides. This promotes the development of stable cathode materials for high-energy-density lithium-ion batteries.

Li1.2Mn0.54Ni0.13Co0.13O2 nanosheets with porous structure as a high-performance cathode material for lithium-ion batteries

The morphological and structural optimizations of electrode materials are efficient ways to enhance their electrochemical performance. Herein, we report a facile co-precipitation and subsequent calcination method to fabricate Li_1.2Mn_0.54Ni_0.13Co_0.13O₂ nanosheets consisting of interconnected primary nanoparticles and open holes through the full thickness. By comparing the nanosheets and the agglomerated nanoparticles, the effects of the morphology and structure on the electrochemical performance are investigated. Specifically, the nanosheets exhibit a discharge capacity of 210 mA h g⁻¹ at 0.5C with a capacity retention of 85% after 100 cycles. The improved electrochemical performance could be attributed to their morphological and structural improvements, which may facilitate sufficient electrolyte contacts, short diffusion paths and good structural integrity during the charge/discharge process. This work provides a feasible approach to fabricate lithium-rich layered oxide cathode materials with 2D morphology and porous structure, and reveals the relationships between their morphology, structure and electrochemical performance.

Li_1.2Mn_0.54Ni_0.13Co_0.13O₂ nanosheets with interconnected nanoparticles and open holes are prepared by co-precipitation and calcination processes, exhibiting improved electrochemical performance compared to agglomerated nanoparticles.