Engineering hollow cobalt oxide nanospheres with porous carbon coating for stable lithium storage

Carbon-Based 3D Architectures as Anodes for Lithium-Ion Battery Systems

Graphite, with its exceptional cyclic performance, continues to dominate as the preferred anode material for lithium-ion batteries. However as high-energy application gains momentum, there is growing demand for higher capacities that alloying/de alloying and conversion type anode materials can offer. Despite their potential, these materials are plagued by challenges such as volumetric fluctuations, low conductivities, and poor cyclic stability. Carbon nanostructures, on the other hand, show tremendous promise with their low volume expansion, high ion diffusion rates, and excellent conductivity. Nevertheless, their limited areal and volumetric densities restrict their widespread utilization. To address these limitations, various strategies such as doping, composite formation, and structural modification have been proposed. This article provides a succinct overview of carbon nanomaterials and their electrochemical performance as 3D carbon-based anodes, along with a comprehensive analysis of the strategies employed to overcome associated challenges while evaluating their potential prospects in the field.

Porous Co3O4/NiO@C Chains Assembled from Nanosheets with Excellent Lithium Storage Performance

Carbon layers-coated porous Co3O4/NiO (denoted as PCNO@C) chains are synthesized by the facile solvothermal method and subsequently annealing treatment under an Ar atmosphere, which are assembled from numerous Co3O4/NiO nanosheets. Benefiting from the unique porous chain structure, the volume change of the electrode is greatly relieved during the long-term cycling processes, and then an excellent cycling stability is obtained (the reversible specific capacity of the 1000th cycle can reach 637.3 mA h g-1 at 5000 mA g-1). Besides, a continuous conductive network is constructed by the coated carbon layers and long chains, the movement rate of electrons is effectively accelerated, and the high rate capability is obtained (the high reversible specific capacity of 480.6 mA h g-1 is retained at 10,000 mA g-1). This work contributes a new idea to construct porous chain structure anode materials.

Consecutive engineering of anodic graphene supported cobalt monoxide composite and cathodic nanosized lithium cobalt oxide materials with improved lithium-ion storage performances

Downsizing the electrochemically active materials in both cathodic and anodic electrodes commonly brings about enhanced lithium-ion storage performances. It is particularly meaningful to explore simplified and effective strategies for exploiting nanosized electrode materials in the advanced lithium-ion batteries. In this work, the spontaneous reaction between few-layered graphene oxide (GO) and metallic cobalt (Co) foils in mild hydrothermal condition is for the first time employed to synthesize a reduced graphene oxide (RGO) supported nanosized cobalt monoxide (CoO) anode material (CoO@RGO). Furthermore, the CoO@RGO sample is converted to nanosized lithium cobalt oxide cathode material (LiCoO2, LCO) by taking the advantages of the self-templated effect. As a result, both the CoO@RGO anode and the LCO cathode exhibit inspiring lithium-ion storage properties. In half-cells, the CoO@RGO sample maintains a reversible capacity of 740.6 mAh·g-1 after 300 cycles at the current density of 1000 mA·g-1 while the LCO sample delivers a reversible capacity of 109.1 mAh·g-1 after 100 cycles at the current density of 100 mA·g-1. In the CoO@RGO//LCO full-cells, the CoO@RGO sample delivers a reversible capacity of 553.9 mAh·g-1 after 50 cycles at the current density of 200 mA·g-1. The reasons for superior electrochemical behaviors of the samples have been revealed, and the strategy in this work can be considered to be straightforward and effective for engineering both anode and cathode materials for lithium-ion batteries.

Charge Storage Mechanism in Electrospun Spinel-Structured High-Entropy (Mn0.2 Fe0.2 Co0.2 Ni0.2 Zn0.2 )3 O4 Oxide Nanofibers as Anode Material for Li-Ion Batteries

High-entropy oxides (HEOs) have emerged as promising anode materials for next-generation lithium-ion batteries (LIBs). Among them, spinel HEOs with vacant lattice sites allowing for lithium insertion and diffusion seem particularly attractive. In this work, electrospun oxygen-deficient (Mn,Fe,Co,Ni,Zn) HEO nanofibers are produced under environmentally friendly calcination conditions and evaluated as anode active material in LIBs. A thorough investigation of the material properties and Li+ storage mechanism is carried out by several analytical techniques, including ex situ synchrotron X-ray absorption spectroscopy. The lithiation process is elucidated in terms of lithium insertion, cation migration, and metal-forming conversion reaction. The process is not fully reversible and the reduction of cations to the metallic form is not complete. In particular, iron, cobalt, and nickel, initially present mainly as Fe3+ , Co3+ /Co2+ , and Ni2+ , undergo reduction to Fe0 , Co0 , and Ni0 to different extent (Fe < Co < Ni). Manganese undergoes partial reduction to Mn3+ /Mn2+ and, upon re-oxidation, does not revert to the pristine oxidation state (+4). Zn2+ cations do not electrochemically participate in the conversion reaction, but migrating from tetrahedral to octahedral positions, they facilitate Li-ion transport within lattice channels opened by their migration. Partially reversible crystal phase transitions are observed.