F-Doping improves the electrochemical performance of Na2VTi(PO4)3 as the cathode for sodium-ion battery

Fluoride Doping Na3Al2/3V4/3(PO4)3 Microspheres As Cathode Materials for Sodium-Ion Batteries with Multielectron Redox

Sodium-ion batteries (SIBs) are potential candidates for large energy storage usage because of the natural abundance and cheap sodium. Nevertheless, improving the energy density and cycling steadiness of SIB cathodes remains a challenge. In this work, F-doping Na3Al2/3V4/3(PO4)3(NAVP) microspheres (Na3Al2/3V4/3(PO4)2.9F0.3(NAVPF)) are synthesized via spray drying and investigated as SIB cathodes. XRD and Rietveld refinement reveal expanded lattice parameters for NAVPF compared to the undoped sample, and the successful cation doping into the Na superionic conductor (NASICON) framework improves Na+ diffusion channels. The NAVPF delivers an ultrahigh capacity of 148 mAh g-1 at 100 mA g-1 with 90.8% retention after 200 cycles, enabled by the activation of V2+/V5+ multielectron reaction. Notably, NAVPF delivers an ultrahigh rate performance, with a discharge capacity of 83.6 mAh g-1 at 5000 mA g-1. In situ XRD demonstrates solid-solution reactions occurred during charge-discharge of NAVPF without two-phase reactions, indicating enhanced structural stability after F-doped. The full cell with NAVPF cathode and Na+ preintercalated hard carbon anode shows a large discharge capacity of 100 mAh g-1 at 100 mA g-1 with 80.2% retention after 100 cycles. This anion doping strategy creates a promising SIB cathode candidate for future high-energy-density energy storage applications.

Se-induced defective carbon nanotubes promoting superior kinetics and electrochemical performance in Na3V2(PO4)3 for half and full Na ion cells

Na3V2(PO4)3 (NVP), with unique Na super ionic conductivity (NASICON) framework, has become an prospective cathode material. However, the low electronic conductivity and poor structural stability limit its further development. Currently, the optimized carbon nanotubes (CNTs) by selenium doping are utilized to modify NVP system for the first time. Notably, the introduction of selenium in CNTs promotes to generate more defects, resulting in abundant active sites for the de-intercalation of Na+ to achieve more pseudocapacitance. Moreover, the newly formative C-Se bonds possess much stronger bond energy than the original CC (586.6 KJ mol-1 vs 377.4 KJ mol-1) bonds. The structure arrangement of the original CNTs is significantly improved by the doped selenium element, indicating that an enhanced carbon skeleton could be obtained to sustain the structural stability of NVP system. Furthermore, the excess selenium can be doped into the bulk of NVP crystal to replace of partial oxygen. Due to the larger ionic of Se2- (1.98 Å vs 1.4 Å of O2-), the VSe6 group has larger framework, which provides a broadened pathway for Na+ migration to improve the kinetic characteristics. Accordingly, the modified NVP@CNTs:Se = 1:1 sample exhibits superior rate capability and cyclic performance. It reveals high capacities of 78.6 and 76.5 mAh/g at 20 and 60C, maintaining 65.4 and 53.8 mAh/g after 5000 and 7000 cycles with high capacity retention of 84.49 % and 70.32 %, respectively. The assembled NVP@CNTs:Se = 1:1//CHC full cell delivers a high value of 153.6 mAh/g, suggesting the optimized sample also behaves excellent application potentials.

Simultaneous Mn and Cl doping on Na3V2(PO4)3 with high performance for full sodium-ion batteries

Nowadays, the poor conductivity and unstable structure have become obstacles for the popularization of Na3V2(PO4)3 (NVP). In the current work, a dual-modified Mn0.1Cl0.3-NVP composite doped with Mn and Cl is prepared by a facile sol-gel method. When Mn2+ with a large ionic radius replaces small V3+, it can improve the stability of the NVP crystal structure. In addition, the replacement of V3+ by Mn2+ in a low valence state can generate redundant hole carriers, which is conducive to the rapid transport of electrons. The substitution of PO43- by Cl-, which is more electronegative, can reduce the impedance and facilitate the movement of Na+. Owing to the synergistic effect of Mn and Cl co-substitution, the structural stability of NVP was systematically enhanced, and the electron transfer and ion diffusion were effectively improved. Consequently, the optimized Mn0.1Cl0.3-NVP sample demonstrated superior electrochemical performance and kinetic properties. It exhibited a high reversible capacity of 109.2 mA h g-1 at 0.1C. Even at 15 and 30C, high discharge capacities of 70.3 mA h g-1 and 68.2 mA h g-1 were observed after 2000 cycles with capacity retention above 80%. Moreover, it delivered remarkable capacities of 77.1 and 73.4 mA h g-1 at 100 and 200C with retained capacity values of 50.3 and 47 mA h g-1, respectively, after 2000 cycles. Furthermore, the assembled Mn0.1Cl0.3-NVP//HC full cell delivered a high value of 94.7 mA h g-1 and lit LED bulbs, indicating its excellent application potential.

Synthesis of F-doped materials and applications in catalysis and rechargeable batteries

Elemental doping is one of the most essential techniques for material modification. It is well known that fluorine is considered to be a highly efficient and inexpensive dopant in the field of materials. Fluorine is one of the most reactive elements with the highest electronegativity (χ = 3.98). Compared to cationic doping, anionic doping is another valuable method for improving the properties of materials. Many materials have physicochemical limitations that affect their practical application in the field of catalysis and rechargeable ion batteries. Many researchers have demonstrated that F-doping can significantly improve the performance of materials for practical applications. This paper reviews the applications of various F-doped materials in photocatalysis, electrocatalysis, lithium-ion batteries, and sodium-ion batteries, as well as briefly introducing their preparation methods and mechanisms to provide researchers with more ideas and options for material modification.

Doping Regulation in Polyanionic Compounds for Advanced Sodium-Ion Batteries

It has long been the goal to develop rechargeable batteries with low cost and long cycling life. Polyanionic compounds offer attractive advantages of robust frameworks, long-term stability, and cost-effectiveness, making them ideal candidates as electrode materials for grid-scale energy storage systems. In the past few years, various polyanionic electrodes have been synthesized and developed for sodium storage. Specifically, doping regulation including cation and anion doping has shown a great effect in tailoring the structures of polyanionic electrodes to achieve extraordinary electrochemical performance. In this review, recent progress in doping regulation in polyanionic compounds as electrode materials for sodium-ion batteries (SIBs) is summarized, and their underlying mechanisms in improving electrochemical properties are discussed. Moreover, challenges and prospects for the design of advanced polyanionic compounds for SIBs are put forward. It is anticipated that further versatile strategies in developing high-performance electrode materials for advanced energy storage devices can be inspired.