Carbon nanotubes-based anode materials for potassium ion batteries: A review

Zn-Doped Hollow Cubic MnO2 as a High-Performance Cathode Material for Zn Ion Batteries

Manganese-based compounds have the characteristics of high theoretical capacity, low cost and stable performance, thus become a research hotspot for cathode materials of zinc-ion batteries (ZIBs). However, in the process of charging and discharging, it is accompanied by problems such as structural collapse and low conductivity, which resulted in severe capacity degration during cycles. In this paper, a kind of Zn2+ doped MnO2 hollow cube cathode material (Zn-MnO2) was prepared by self-sacrificing template method. The Zn2+ doped in MnO2 crystals can induce oxygen vacancies in the structure, thereby improving the structural stability ion diffusion coefficient and electrical conductivity of the material. After 100 cycles at 0.3 A g-1, the high specific capacity of 281.2 mA h g-1 is still maintained. Through ex-situ XPS and ex-situ XRD tests, the mechanism of charge-discharge process was discussed. The results show that the storage mechanism of Zn-MnO2 is H+ and Zn2+ insertion/removal and Mn3+/Mn2+ two-electron reaction pathway. The total state density (TDOS) and partial state density (PDOS) of Zn-MnO2 and MnO2 further demonstrated that the doping of Zn2+ enhanced the electron conductivity and is beneficial to the electron transfer during the electrochemical reaction.

Binder-Free Anodes for Potassium-ion Batteries Comprising Antimony Nanoparticles on Carbon Nanotubes Obtained Using Electrophoretic Deposition

Antimony has a high theoretical capacity and suitable alloying/dealloying potentials to make it a future anode for potassium-ion batteries (PIBs); however, substantial volumetric changes, severe pulverization, and active mass delamination from the Cu foil during potassiation/depotassiation need to be overcome. Herein, we present the use of electrophoretic deposition (EPD) to fabricate binder-free electrodes consisting of Sb nanoparticles (NPs) embedded in interconnected multiwalled carbon nanotubes (MWCNTs). The anode architecture allows volume changes to be accommodated and prevents Sb delamination within the binder-free electrodes. The Sb mass ratio of the Sb/CNT nanocomposites was varied, with the optimized Sb/CNT nanocomposite delivering a high reversible capacity of 341.30 mA h g-1 (∼90% of the initial charge capacity) after 300 cycles at C/5 and 185.69 mA h g-1 after 300 cycles at 1C. Postcycling investigations reveal that the stable performance is due to the unique Sb/CNT nanocomposite structure, which can be retained over extended cycling, protecting Sb NPs from volume changes and retaining the integrity of the electrode. Our findings not only suggest a facile fabrication method for high-performance alloy-based anodes in PIBs but also encourage the development of alloying-based anodes for next-generation PIBs.

Potassium doping of vertically aligned multi-walled carbon nanotubes

Alkali metal doping of multi-walled carbon nanotubes is of great interest, both fundamentally to explore the effect of dopants on quasi-one-dimensional electrical systems and for energy applications such as alkali metal storage. We present an investigation with complementary photoemission and Raman spectroscopies, fully carried out in an ultra-high vacuum, to unveil the electronic and vibrational response of a forest of highly aligned multi-walled carbon nanotubes by in situ potassium doping. The charge donation by the alkali adatoms induces a plasmon mode, and the density of states undergoes an energy shift consistent with electron donation and band filling of the multi-walled carbon nanotube band structure. The π-states in the valence band and the Raman peaks unveil an evolution that can be ascribed to charge donation and partially to a tensile strain exerted by the K adatoms on the carbon lattice. All these effects are thermally reversible, fostering these materials as a potential system for electronic charge harvesting.

Electrosprayed hierarchical mesoporous Mn0.5Ti2(PO4)3@C microspheres as promising High-Performance anode for Potassium-Ion batteries

NASICON-structured Ti-based polyanion compounds benefit from a stable structural framework, large ion channels, and fast ion mobility. However, the large radius of potassium and its poor electronic conductivity restrict its use in potassium-ion batteries. Herein, hierarchical mesoporous Mn0.5Ti2(PO4)3@C microspheres have been successfully synthesized using a simple electrospraying method. These microspheres consist of Mn0.5Ti2(PO4)3 nanoparticles evenly embedded in three-dimensional mesoporous carbon microspheres. The hierarchical mesoporous micro/nanostructure facilitates the rapid insertion and extraction of K+, while the three-dimensional carbon microspheres matrix enhances electrical conductivity and prevents active materials from collapsing during cycling. So the hierarchical mesoporous Mn0.5Ti2(PO4)3@C microspheres exhibit a high reversible discharge specific capacity (306 mA h g-1 at 20 mA g-1), a notable rate capability (123 mA h g-1 at 5000 mA g-1), and exceptional cycle performance (148 mA h g-1 at 500 mA g-1 after 1000 cycles). The results show that electrosprayed Mn0.5Ti2(PO4)3@C microspheres are a promising anode for PIBs.

Advancements and Prospects of Graphite Anode for Potassium-Ion Batteries

Potassium-ion batteries (KIBs) have recently attracted considerable attention owing to their resource abundance, low cost and environmental friendliness. Graphite as a mature commercial anode material for lithium-ion batteries, has been proved as a promising anode candidate for KIBs by reversible forming potassium-graphite intercalation compounds. However, large volume expansion and sluggish K+ kinetics caused by the incompatibility between large radius of K+ and the small interlayer spacing of graphite, result in the poor cycle stability and rate performances, hindering its practical application. Extensive research efforts have focused on improving the potassium storage performance of graphite anodes. This review provides an overview of recent advances in addressing these challenges and optimizing the electrochemical performance of graphite anodes for KIBs. Various strategies to improve the electrochemical performance of graphite and graphitic carbon anodes, such as microcrystalline regulation, heteroatom doping, morphological adjustment, and coating modification, are discussed, while the critical issues and challenges associated with graphite anodes and the prospects for their advancement in KIBs are highlighted. The review offers valuable guidelines for rational structural design and promotes the commercial development of high-performance graphite anode materials for KIBs.

Research progress of biomass carbon materials as anode materials for potassium-ion batteries

Biochar materials have attracted people's attention because of their environmental friendliness, abundant resources, and the use of waste resources for reuse. As a potassium-ion anode material, biomass char materials synthesized by different methods have broad application prospects. However, due to the problems of low initial magnification and limited potassium-storage capacity, it is necessary to improve the electrochemical performance through modifications, such as atomic doping. Atomic doping is an effective way to improve battery conductivity and potassium storage. In this paper, the synthesis method of biochar as an anode material for potassium-ion batteries and the influence of atomic doping on its modification in recent years are reviewed.