Unconventional Phase Engineering of Fuel-Cell Electrocatalysts

Understanding Advanced Transition Metal-Based Two Electron Oxygen Reduction Electrocatalysts from the Perspective of Phase Engineering

Non-noble transition metal (TM)-based compounds have recently become a focal point of extensive research interest as electrocatalysts for the two electron oxygen reduction (2e- ORR) process. To efficiently drive this reaction, these TM-based electrocatalysts must bear unique physiochemical properties, which are strongly dependent on their phase structures. Consequently, adopting engineering strategies toward the phase structure has emerged as a cutting-edge scientific pursuit, crucial for achieving high activity, selectivity, and stability in the electrocatalytic process. This comprehensive review addresses the intricate field of phase engineering applied to non-noble TM-based compounds for 2e- ORR. First, the connotation of phase engineering and fundamental concepts related to oxygen reduction kinetics and thermodynamics are succinctly elucidated. Subsequently, the focus shifts to a detailed discussion of various phase engineering approaches, including elemental doping, defect creation, heterostructure construction, coordination tuning, crystalline design, and polymorphic transformation to boost or revive the 2e- ORR performance (selectivity, activity, and stability) of TM-based catalysts, accompanied by an insightful exploration of the phase-performance correlation. Finally, the review proposes fresh perspectives on the current challenges and opportunities in this burgeoning field, together with several critical research directions for the future development of non-noble TM-based electrocatalysts.

Recent Advances in Manganese-Based Materials for Electrolytic Water Splitting

Developing earth-abundant and highly effective electrocatalysts for electrocatalytic water splitting is a prerequisite for the upcoming hydrogen energy society. Recently, manganese-based materials have been one of the most promising candidates to replace noble metal catalysts due to their natural abundance, low cost, adjustable electronic properties, and excellent chemical stability. Although some achievements have been made in the past decades, their performance is still far lower than that of Pt. Therefore, further research is needed to improve the performance of manganese-based catalytic materials. In this review, we summarize the research progress on the application of manganese-based materials as catalysts for electrolytic water splitting. We first introduce the mechanism of electrocatalytic water decomposition using a manganese-based electrocatalyst. We then thoroughly discuss the optimization strategy used to enhance the catalytic activity of manganese-based electrocatalysts, including doping and defect engineering, interface engineering, and phase engineering. Finally, we present several future design opportunities for highly efficient manganese-based electrocatalysts.

Strategies for Promoting Catalytic Performance of Ru-based Electrocatalysts towards Oxygen/Hydrogen Evolution Reaction

Ru-based materials hold great promise for substituting Pt as potential electrocatalysts toward water electrolysis. Significant progress is made in the fabrication of advanced Ru-based electrocatalysts, but an in-depth understanding of the engineering methods and induced effects is still in their early stage. Herein, we organize a review that focusing on the engineering strategies toward the substantial improvement in electrocatalytic OER and HER performance of Ru-based catalysts, including geometric structure, interface, phase, electronic structure, size, and multicomponent engineering. Subsequently, the induced enhancement in catalytic performance by these engineering strategies are also elucidated. Furthermore, some representative Ru-based electrocatalysts for the electrocatalytic HER and OER applications are also well presented. Finally, the challenges and prospects are also elaborated for the future synthesis of more effective Ru-based catalysts and boost their future application.

Dimension Engineering in Noble-Metal-Based Electrocatalysts for Water Splitting

Dimension engineering plays a critical role in determining the electrocatalytic performance of catalysts towards water electrolysis since it is highly sensitive to the surface and interface properties. Bearing these considerations into mind, intensive efforts have been devoted to the rational dimension design and engineering, and many advanced nanocatalysts with multidimensions have been successfully fabricated. Aiming to provide more guidance for the fabrication of highly efficient noble-metal-based electrocatalysts, this review has focused on the recent progress in dimension engineering of noble-metal-based electrocatalysts towards water splitting, including the advanced engineering strategies, the application of noble-metal-based electrocatalysts with distinctive geometric structure from 0D to 1D, 2D, 3D, and multidimensions. In addition, the perspective insights and challenges of the dimension engineering in the noble-metal-based electrocatalysts is also systematically discussed.

Hollow Heterostructured Nanocatalysts for Boosting Electrocatalytic Water Splitting

The implementation of electrochemical water splitting demands the development and application of electrocatalysts to overcome sluggish reaction kinetics of hydrogen/oxygen evolution reaction (HER/OER). Hollow nanostructures, particularly for hollow heterostructured nanomaterials can provide multiple solutions to accelerate the HER/OER kinetics owing to their advantageous merit. Herein, the recent advances of hollow heterostructured nanocatalysts and their excellent performance for water splitting are systematically summarized. Starting by illustrating the intrinsically advantageous features of hollow heterostructures, achievements in engineering hollow heterostructured electrocatalysts are also highlighted with the focus on structural design, interfacial engineering, composition regulation, and catalytic evaluation. Finally, some perspective insights and future challenges of hollow heterostructured nanocatalysts for electrocatalytic water splitting are also discussed.

Pd-Based Metallenes for Fuel Cell Reactions

Pd-based metallenes, atomically thin layers composed primarily of under-coordinated Pd atoms, have emerged as the newest members in the family of two-dimensional (2D) nanomaterials. Moreover, the unique physiochemical properties, high intrinsic activity associated with metallenes coupled with the ease of applying chemical modifications result in great potential in catalyst engineering for fuel cell reactions. Especially in recent years, interest in Pd-based metallenes is growing, as evidenced by surge in available literatures. Herein, we have reviewed the recent findings achieved in Pd-based metallenes in fuel cells by highlighting the technologies available for deriving metallenes and manifesting the modification strategies for designing them to better suit the application demand. Moreover, we also discuss the perspective insights of Pd-based metallenes for fuel cells regarding the surfactant-free synthesis method, strain engineering, constructing high-entropy alloy, and so on.

Coupling Transition Metal Catalysts with Ir for Enhanced Electrochemical Water Splitting Activity

Developing advanced electrocatalysts is of great significance for boosting electrochemical water splitting to produce hydrogen. The electrocatalytic activity of a catalyst is associated with the surface/interface, geometric structure, and electronic properties. Coupling Ir with transition metal compounds is an effective strategy to improve their electrocatalytic performance. In this review, we summarize the recent progress of Ir coupled transition metal compound catalysts for the application in driving electrochemical water splitting. The significant role of Ir played in the promotion of electrocatalytic performance is firstly illustrated. Then, the applications of Ir-based catalysts in the hydrogen evolution reaction (HER) and oxygen evolution reaction (OER) are comprehensively discussed, with an emphasis on correlating the structure-function relationships. Lastly, the challenges and future directions for the fabrication of more advanced Ir coupled electrocatalysts are also presented.

Heterojunction MnO2-nanosheet-decorated Ag nanowires with enhanced oxidase-like activity for the sensitive dual-mode detection of glutathione

The biocatalytic design of nanomaterials with enzyme-like activity is considered a reliable and promising toolkit for the generation of diagnostic agents in complex biological microenvironments. However, the preparation of nanomaterials while maintaining a high catalytic activity in tumor cells (pH 6.0-6.5) poses a prominent challenge. Herein, we constructed a biomimetic enzyme-trigged dual-mode system with colorimetry at 652 nm and photothermal biosensors to detect glutathione based on hollow MnO₂-nanosheet-decorated Ag nanowires (Ag@MnO₂) as an oxidase-like nanozyme. As expected, Ag@MnO₂ catalyzed the oxidation of 3,3',5,5'-tetramethylbenzidine (TMB) in the absence of H₂O₂, leading to a blue-colored oxidized TMB (oxTMB) that displayed oxidase-like activity in pH 6.0. Interestingly, the portable dual-mode colorimetry and photothermal method for GSH was developed based on the redox reaction between GSH and oxTMB. This detection method exhibited a wide linear range of 0.1-55 μM for GSH with a low detection limit of 0.08 μM. This work highlights a new insight into nanotechnology by taking advantage of biomimetic design in biological analysis.

Hydrogen evolution reaction catalysis on RuM (M = Ni, Co) porous nanorods by cation etching

The development of efficient and stable nanomaterial electrocatalysts for the hydrogen evolution reaction (HER) is of great significance for renewable energy conversion via water electrolysis. Herein, we have developed a novel class of bimetallic RuM (M = Ni, Co) hollow nanorods (HNRs) through a facile Fe³⁺ etching strategy, as electrocatalysts for enhancing the HER. Morphological physical characterization and electrochemical tests demonstrated that RuM (M = Ni, Co) HNRs with hollow structures can effectively enhance electrocatalytic activity due to their high specific surface areas. Impressively, the RuNi HNRs exhibited superior HER performance with an overpotential of merely 25.6 mV in 1 M KOH solution at 10 mA cm^-2, which is significantly lower than that of commercial Pt/C (44.7 mV). Moreover, the as prepared RuNi HNRs showed excellent stability and could continuously work at a current density of 10 mA cm^-2 for 40 h with a negligible increase in potential. The Ru-based HNRs also showed high HER activity in an acidic solution. This study paves a new way for the universal fabrication of bimetallic hollow structured nanomaterials as efficient electrocatalysts for boosting the HER.

Cation-Anion Dual Doping Modifying Electronic Structure of Hollow CoP Nanoboxes for Enhanced Water Oxidation Electrocatalysis

Tuning the electronic state of a nanocatalyst is of vital importance for elevating its catalytic performance toward oxygen evolution reaction (OER). Herein, a cation-anion dual doping strategy has been proposed for modifying the electronic structure of CoP via doping Fe and S atoms. Impressively, Fe doping has been demonstrated to be favorable for improving the carrier density of CoP to produce more hydroxyl radicals (^•OH), while S doping can further modify the electronic structure of CoP to improve the charge-transfer characteristics, thereby synergistically decreasing the energy barrier for the transformation of O* to OOH* and promoting the electrocatalytic OER performance. More importantly, the highly open nanobox structure is also beneficial for the exposure of more accessible catalytically active sites, which can substantially facilitate the electron and mass transport, leading to the superb catalytic OER performance. The successful modulation of OER performance via dual-doping strategy will pose a new strategy for designing more advanced nanocatalysts for energy-related catalysis process.

Biosynthesis-mediated Ni-Fe-Cu LDH-to-sulfides transformation enabling sensitive detection of endogenous hydrogen sulfide with dual-readout signals

Hydrogen sulfide (H₂S) is a vital endogenous gas signal molecule undertaking numerous physiological functions such as biological regulation and cytoprotection. Herein, we developed an electrochemical (EC) and photothermal (PT) dual-readout signals method for H₂S detection based on a novel biosynthesis-mediated Ni-Fe-Cu LDH-to-sulfides transformation strategy. Interestingly, the Cu²⁺-based Ni-Fe LDH (Ni-Fe-Cu LDH) can act as the Cu²⁺ source to react with H₂S, resulting in the in-situ generation of Cu_xS on Ni-Fe-Cu LDH surfaces. Because of the EC signal and intrinsic near-infrared (NIR) PT conversion ability of Cu_xS under 808 nm laser irradiation, the obtained Cu_xS@Ni-Fe-Cu LDH is applied to stimulate EC signal and temperature readout. By this means, a dual-readout signal mode is established for H₂S detection. Under the optimum conditions, this combination of EC and PT methods displays a wide linear range for H₂S to 0.1 μM-90 μM and 50 μM-400 μM, respectively, with a low detection limit of 0.09 μM. In addition, the practicality of Ni-Fe-Cu LDH is verified by determination of endogenous H₂S in living cells. This work not only provides a promising application for H₂S diagnosis but also exhibits the new characteristic of Ni-Fe-Cu LDH nanomaterials as signal transduction tags.

Defect and Interface Engineering of Three-Dimensional Open Nanonetcage Electrocatalysts for Advanced Electrocatalytic Oxygen Evolution Reaction

Defect engineering and interface engineering are two efficient approaches to promote the electrocatalytic performance of transition metal oxides (TMOs) by modulating the local electronic structure and inducing a synergistic effect but usually require costly and complicated processes. Herein, a facile electrochemical etching method is proposed for the controllable tailoring of the defects in a three-dimensional (3D) open nanonetcage CoZnRuO_x heterostructure via the in situ electrochemical etching to remove partial ZnO. The highly open 3D nanostructures, numerous defects, and multicomponent heterointerfaces endow the CoZnRuO_x nanonetcages with more accessible active sites, moderated local electronic structure, and strong synergistic effect, thereby enabling them to not only deliver an ultralow overpotential (244 mV @ 10 mA cm^-2) for oxygen evolution reaction (OER) but also high-performance overall water electrolysis by coupling with commercial Pt/C, with a potential of 1.52 V at 10 mA cm^-2. Moreover, experiments and characterizations also reveal that the remaining Zn²⁺ can facilitate OH^- adsorption and charge transfer, which also further improves the electrocatalytic OER performance. This work proposes a promising strategy for creating surface defects in heterostructured TMOs and provides insights to understand the defect- and interface-induced enhancement of OER electrocatalysis.

Recent advances in hollow nanomaterials with multiple dimensions for electrocatalytic water splitting

Electrocatalytic water splitting has great research prospects in the production of green hydrogen energy, and electrocatalysts are the prerequisite. As widely employed efficient electrocatalysts, hollow nanostructures have attracted a lot of research attention due to their excellent catalytic activity and structural stability. Moreover, the abundant catalytically active sites and tunable morphology also make hollow nanomaterials promising electrocatalysts for water splitting. Despite these advantages, the industrial applications of these hollow nanocatalysts are impeded by limitations like the lack of effective synthesis methods and unclear formation mechanisms. Therefore, extensive efforts have been devoted to the development of efficient synthesis strategies to boost the development of more efficient hollow electrocatalysts, and great progress has been achieved in recent years. To gain a better understanding of the rapid development of hollow nanocatalysts for water splitting, we herein organize a review to summarize the recent synthetic methods and advantages of hollow materials with different dimensions. The specific advantages of hollow nanomaterials in electrocatalytic water splitting, such as abundant active sites, a stable structure, high mass transfer efficiency, and reduced aggregation of catalytic particles, are also summarized. Finally, the challenges and prospects of hollow nanostructures with multiple dimensions in electrocatalytic water splitting are further explored.

Hierarchical Hollow CoWO4-Co(OH)2 Heterostructured Nanoboxes Enabling Efficient Water Oxidation Electrocatalysis

Rational design and construction of well-defined hollow heterostructured nanomaterials assembled by ultrathin nanosheets overtakes crucial role in developing high-efficiency oxygen evolution reaction (OER) electrocatalysts. Herein, a reliable metal-organic framework-mediated and cation-exchange strategy to tune the geometric structure and multicomponent heterostructures has been proposed for the fabrication of hollow CoWO₄-Co(OH)₂ hierarchical nanoboxes assembled by rich ultrathin nanosheets. Benefiting from the hierarchical hollow nanostructure, the CoWO₄-Co(OH)₂ nanoboxes offer plenty of metal active centers available for reaction intermediates. Moreover, the well-defined nanointerfaces between CoWO₄ and Co(OH)₂ can function as the bridge for boosting the efficient electron transfer from CoWO₄ to Co(OH)₂. As a consequence, the optimized CoWO₄-Co(OH)₂ nanoboxes can exhibit outstanding electrocatalytic performance toward OER by delivering 10 mA cm^-2 with a low overpotential of 280 mV and a small Tafel slope of 70.6 mV dec^-1 as well as outstanding electrochemical stability. More importantly, this CoWO₄-Co(OH)₂ heterostructured nanocatalyst can couple with Pt/C to drive overall water splitting to achieve 10 mA cm^-2 with a voltage of 1.57 V.

Bioinspired silk fibroin materials: From silk building blocks extraction and reconstruction to advanced biomedical applications

Silk fibroin has become a promising biomaterial owing to its remarkable mechanical property, biocompatibility, biodegradability, and sufficient supply. However, it is difficult to directly construct materials with other formats except for yarn, fabric and nonwoven based on natural silk. A promising bioinspired strategy is firstly extracting desired building blocks of silk, then reconstructing them into functional regenerated silk fibroin (RSF) materials with controllable formats and structures. This strategy could give it excellent processability and modifiability, thus well meet the diversified needs in biomedical applications. Recently, to engineer RSF materials with properties similar to or beyond the hierarchical structured natural silk, novel extraction and reconstruction strategies have been developed. In this review, we seek to describe varied building blocks of silk at different levels used in biomedical field and their effective extraction and reconstruction strategies. This review also present recent discoveries and research progresses on how these functional RSF biomaterials used in advanced biomedical applications, especially in the fields of cell-material interactions, soft tissue regeneration, and flexible bioelectronic devices. Finally, potential study and application for future opportunities, and current challenges for these bioinspired strategies and corresponding usage were also comprehensively discussed. In this way, it aims to provide valuable references for the design and modification of novel silk biomaterials, and further promote the high-quality-utilization of silk or other biopolymers.

Ru doping boosts electrocatalytic water splitting

Heteroatom doping plays a crucial role in improving the electrocatalytic performance of catalysts towards water splitting. Owing to the existence of Ru-O moieties, Ru is thus emerging as an ideal dopant for promoting the electrocatalytic performance for water splitting by modifying the electronic structure, introducing extra active sites, improving electronic conductivity, and inducing a strong synergistic effect. Benefitting from these advantages, Ru-doped nanomaterials have been widely investigated and employed as advanced electrocatalysts for water splitting, and many excellent Ru-doped electrocatalysts have been successfully developed. In an effort to obtain a better understanding of the influence of Ru doping on the electrocatalytic water splitting performance of nanocatalysts, we herein summarize the recent progress of Ru-doped electrocatalysts by focusing on the synthesis strategies and advantageous merits. Applications of these new materials in water electrolysis technology are also discussed with emphasis on future directions in this active field of research.

Recent advances in fuel cell reaction electrocatalysis based on porous noble metal nanocatalysts

As the center of fuel cells, electrocatalysts play a crucial role in determining the conversion efficiency from chemical energy to electrical energy. Therefore, the development of advanced electrocatalysts with both high activity and stability is significant but challenging. Active site, mass transport, and charge transfer are three central factors influencing the catalytic performance of electrocatalysts. Endowed with rich available surface active sites, facilitated electron transfer and mass diffusion channels, and highly active components, porous noble metal nanomaterials are widely considered as promising electrocatalysts toward fuel cell-related reactions. The past decade has witnessed great achievements in the design and fabrication of advanced porous noble metal nanocatalysts in the field of electrocatalytic fuel oxidation reaction (FOR) and oxygen reduction reaction (ORR). Herein, the recent research advances regarding porous noble metal nanocatalysts for fuel cell-related reactions are reviewed. In the discussions, the inherent structural features of porous noble metal nanostructures for electrocatalytic reactions, advanced synthetic strategies for the fabrication of porous noble metal nanostructures, and the structure-performance relationships are also provided.

Electronic and architecture engineering of hammer-shaped Ir–NiMoO4-ZIF for effective oxygen evolution

Electronic and architecture engineering is realized via doping an ultralow amount of Ir into NiMoO4-ZIF hammers to achieve outstanding electrocatalytic OER performance.

Boosted Electrocatalysis of Bimetallic Sulfide Particles Incorporated in Fe/Co-based Metal-Organic Framework Ultrathin Nanosheets toward Oxygen Evolution Reaction

The development of inexpensive, high-performance, and long-lasting electrocatalysts toward oxygen evolution reaction (OER) proves crucial to enhance the efficiency of water splitting to obtain clean and sustainable energy. Herein, Fe/Co-based...

Electrospun one-dimensional electrocatalysts for boosting electrocatalysis

Electrocatalytic reaction plays a crucial role in determining the energy conversion efficiency in advanced technology. However, it is limited by the sluggish reaction kinetics and high energy barrier. These shortcomings...

Electronic structure optimization boosts Pd nanocrystals for ethanol electrooxidation realized by Te doping

Te doping greatly modifies the electronic structure of Pd and promotes the electrocatalytic performance towards EOR.