Performance of wind-powered soil electroremediation process for the removal of 2,4-D from soil

Emerging technologies for the removal of pesticides from contaminated soils and their reuse in agriculture

Pesticides are becoming more prevalent in agriculture to protect crops and increase crop yields. However, nearly all pesticides used for this purpose reach non-target crops and remain as residues for extended periods. Contamination of soil by widespread pesticide use, as well as its toxicity to humans and other living organisms, is a global concern. This has prompted us to find solutions and develop alternative remediation technologies for sustainable management. This article reviews recent technological developments for remediating pesticides from contaminated soil, focusing on the following major points: (1) The application of various pesticide types and their properties, the sources of pesticides related to soil pollution, their transport and distribution, their fate, the impact on soil and human health, and the extrinsic and intrinsic factors that affect the remediation process are the main points of focus. (2) Sustainable pesticide degradation mechanisms and various emerging nano- and bioelectrochemical soil remediation technologies. (3) The feasible and long-term sustainable research and development approaches that are required for on-site pesticide removal from soils, as well as prospects for applying them directly in agricultural fields. In this critical analysis, we found that bioremediation technology has the potential for up to 90% pesticide removal from the soil. The complete removal of pesticides through a single biological treatment approach is still a challenging task; however, the combination of electrochemical oxidation and bioelectrochemical system approaches can achieve the complete removal of pesticides from soil. Further research is required to remove pesticides directly from soils in agricultural fields on a large-scale.

A review on recent environmental electrochemistry approaches for the consolidation of a circular economy model

Availability of raw materials in the chemical industry is related to the selection of the chemical processes in which they are used as well as to the efficiency, cost, and eventual evolution to more competitive dynamics of transformation technologies. In general terms however, any chemically transforming technology starts with the extraction, purification, design, manufacture, use, and disposal of materials. It is important to create a new paradigm towards green chemistry, sustainability, and circular economy in the chemical sciences that help to better employ, reuse, and recycle the materials used in every aspect of modern life. Electrochemistry is a growing field of knowledge that can help with these issues to reduce solid waste and the impact of chemical processes on the environment. Several electrochemical studies in the last decades have benefited the recovery of important chemical compounds and elements through electrodeposition, electrowinning, electrocoagulation, electrodialysis, and other processes. The use of living organisms and microorganisms using an electrochemical perspective (known as bioelectrochemistry), is also calling attention to "mining", through plants and microorganisms, essential chemical elements. New process design or the optimization of the current technologies is a major necessity to enhance production and minimize the use of raw materials along with less generation of wastes and secondary by-products. In this context, this contribution aims to show an up-to-date scenario of both environmental electrochemical and bioelectrochemical processes for the extraction, use, recovery and recycling of materials in a circular economy model.

Can the green energies improve the sustainability of electrochemically-assisted soil remediation processes?

The green powering of electrochemically-assisted soil remediation processes had been strongly discouraged. Low remediation efficiencies have been reported as a consequence of the reversibility of the transport processes when no power is applied to the electrodes, due to the intermittent powering of renewable sources. However, it has been missed a deeper evaluation from the environmental point of view. This work goes further and seeks to quantify, using life cycle assessment tools, the environmental impacts related to the electro-kinetic treatments powered by different sources: grid (Spanish energy mix), photovoltaic and wind sources. The global warming potential and the ozone depletion showed higher environmental impacts in case of using green energies, associated with the manufacturing of the energy production devices. In contrast to that, results pointed out the lowest water consumption for the treatment powered with solar panels. The huge water requirements to produce energy, considering a Spanish energy mix, drop the sustainability of this powering strategy in terms of water footprint. Regarding toxicities, the pollutant toxicity was highly got rid of after 15 days of treatment, regardless the powering source used. Nevertheless, the manufacturing of energy and green energy production devices has a huge impact into the toxicity of the remediation treatments, increasing massively the total toxicity of the process, being this effect less prominent by the electro-kinetic treatment solar powered. In view of the overall environmental impact assessed, according to mid and endpoint impact categories, it can be claimed that, despite the high energy requirements and affectation to the global warming potential, the use of solar power is a more sustainable alternative to remediate polluted soils by electrochemical techniques.

Toward more sustainable photovoltaic solar electrochemical oxidation treatments: Influence of hydraulic and electrical distribution

Powering electrochemical technologies with renewable energies is a promising way to get more sustainable environmental remediation techniques. However, the operational conditions of those processes must be optimized to undergo fast and efficient treatments. In this work, the influence of electrical and hydraulic connections in the performance of a set of two electrolyzers directly powered by photovoltaic panels was evaluated. Despite both electrolyzers were assembled using the same electrode material, they showed different performances. Results indicate that the electrolyzer with higher ohmic resistance and higher overpotential attained a greater production of oxidant species, being produced under the most efficient strategy around 4.8 and 15.1 mmol of oxidants per Ah by electrolyzer 1 and 2, respectively. Nevertheless, an excess of oxidant production because of an inefficient energy management, led to low removal efficiencies as a consequence of a waste of energy into undesirable reactions. Regarding the hydraulic distribution of wastewater between the cells, it was found to influence on the total remediation attained, being the serial connection 2.5 and 1.8 more efficient than a parallel wastewater distribution under series and parallel electrical strategies, respectively. Regarding electrical strategies, parallel connections maximize the use of power produced by the photovoltaic panels. Furthermore, this allows the system to work under lower current densities, reducing the mass transfer limitations. Considering both advantages, a hydraulic connection of the cells in series and an electrical connection in parallel was found to reach the highest specific removal of pollutant, 2.52 mg clopyralid (Wh)^-1. Conversely, the opposite strategy (parallel hydraulic connection-series electrical connection) showed the lowest remediation ratio, 0.48 mg clopyralid (Wh)^-1. These results are important to be considered in the design of electrolytic treatments of waste directly powered by photovoltaic panels, because they show the way to optimize the cells stack layout in full-scale applications, exhibiting significant impact on the sustainability of the electrochemical application.

Improving sustainability of electrolytic wastewater treatment processes by green powering

This work focuses on the evaluation of the impact of powering electrolytic wastewater treatment processes with grid or renewable energy on the sustainability of this electrochemical remediation technology. To face this goal, it was performed an inventory of three bench-scale plants made up by the same treatment technology but powered from different supplies: connected to grid and directly coupled with solar photovoltaic panels or a wind turbine. Results show that the powering mode can significantly affect the environmental risks of the treatment, not only in terms of electricity demand but also on the formation of intermediates, which are more important in the cases in which the intensity profile varied. A life cycle assessment (LCA) is carried out in order to quantify the environmental impacts of green powering electrolytic wastewater treatment processes. Ecoinvent 3.3 data base, AWARE, USEtox, IPPC and ReCiPe methodologies are used to quantify the environmental burden into 5 midpoint (water footprint, global warming 100a, ozone layer depletion, human toxicity, freshwater ecotoxicity) and 17 endpoint impact categories. All impact categories are higher in the case in which the supplied power cames from a electricity grid mix. For the removal of 0.1 g 2,4-dichlorophenoxyacetic acid (2,4D) per liter (functional unit) of treated wastewater releases 0.14 kg CO₂ eq. If the energy is provided by a wind turbine or a solar panel the processes emit 0.020 kg CO₂ eq and 0.019 kg CO₂ eq, respectively. A comparison of the impact based on the grid mix used in different countries is also made, which has pointed out the relevance of this input on the sustainability of the environmental electrochemical technologies.

Sustainability in ElectroKinetic Remediation Processes: A Critical Analysis

In recent years, the development of suitable technologies for the remediation of environmental contaminations has attracted considerable attention. Among these, electrochemical approaches have gained prominence thanks to the many possible applications and their proven effectiveness. This is particularly evident in the case of inorganic/ionic contaminants, which are not subject to natural attenuation (biological degradation) and are difficult to treat adequately with conventional methods. The purpose of this contribution is to present a critical overview of electrokinetic remediation with particular attention on the sustainability of the various applications. The basis of technology will be briefly mentioned, together with the phenomena that occur in the soil and how that will allow its effectiveness. The main critical issues related to this approach will then be presented, highlighting the problems in terms of sustainability, and discussing some possible solutions to reduce the environmental impact and increase the cost-effectiveness and sustainability of this promising technology.

An approach to the photocatalytic mechanism in the TiO2-nanomaterials microorganism interface for the control of infectious processes

The approach of this timely review considers the current literature that is focused on the interface nanostructure/cell-wall microorganism to understand the annihilation mechanism. Morphological studies use optical and electronic microscopes to determine the physical damage on the cell-wall and the possible cell lysis that confirms the viability and microorganism death. The key parameters of the tailoring the surface of the photoactive nanostructures such as the metal functionalization with bacteriostatic properties, hydrophilicity, textural porosity, morphology and the formation of heterojunction systems, can achieve the effective eradication of the microorganisms under natural conditions, ranging from practical to applications in environment, agriculture, and so on. However, to our knowledge, a comprehensive review of the microorganism/nanomaterial interface approach has rarely been conducted. The final remarks point the ideal photocatalytic way for the effective prevention/eradication of microorganisms, considering the resistance that the microorganism could develop without the appropriate regulatory aspects for human and ecosystem safety.