Application of saponin biosurfactant and its recovery in the MEUF process for removal of methyl violet from wastewater

Efficient removal of heavy metals in water utilizing facile cross-link conjugated linoleic acid micelles

Micellar-enhanced ultrafiltration (MEUF) technology is an effective method to treat low-concentration heavy metal wastewater. However, the leakage of surfactants in the ultrafiltration (UF) process will inevitably cause secondary pollution. In this study, a biosurfactant of conjugated linoleic acid (CLA) with conjugated double bonds was selected to bind its micelles by simple thermal crosslinking to obtain morphologically stable stearic acid (SA) nanoparticles. The pure SA nanoparticles were obtained by repeated dialysis. The stability of the SA nanoparticles was verified by comparing the particle size distribution and solubility of the materials before and after crosslinking at different pH levels. The effectiveness of SA nanoparticle-enhanced UF in removing heavy metals was verified by exploring the adsorption performance of SA nanoparticles. The dialysis device was used to simplify the UF device, wherein SA nanoparticles were assessed as adsorbents for the elimination of Cu2+, Pb2+, and Cd2+ ions from aqueous solutions under diverse process parameters, including pH, contact time, metal ion concentration, and coexisting ions. The findings indicate that the SA nanoparticles have no evidence of secondary contamination in UF and exhibit compatibility with a broad pH range and coexisting ions. The maximum adsorption capacities for Cu2+, Pb2+, and Cd2+ were determined to be 152.77, 403.56, and 271.46 mg/g, respectively.

Removal of Nutrients from Water Using Biosurfactant Micellar-Enhanced Ultrafiltration

The removal of NH₄⁺, NO₃^-, and NH₃^- from wastewater can be difficult and expensive. Through physical, chemical, and biological processes, metals and nutrients can be extracted from wastewater. Very few scientific investigations have employed surfactants with high biodegradability, low toxicity, and suitability for ion removal from wastewater at different pH and salinity levels. This research employed a highly biodegradable biosurfactant generated from yeast (sophorolipid) through micellar-enhanced ultrafiltration (MEUF). MEUF improves nutrient removal efficiency and reduces costs by using less pressure than reverse osmosis (RO) and nanofiltration (NF). The biosurfactant can be recovered after the removal of nutrient- and ion-containing micelles from the filtration membrane. During the experiment, numerous variables, including temperature, pH, biosurfactant concentration, pollutant ions, etc., were evaluated. The highest amount of PO₄^3- was eliminated at a pH of 6.0, which was reported at 94.9%. Maximum NO₃^- removal occurred at 45.0 °C (96.9%), while maximum NH₄⁺ removal occurred at 25.0 mg/L (94.5%). Increasing TMP to 200 kPa produced the maximum membrane flow of 226 L/h/m². The concentrations of the contaminating ion and sophorolipid were insignificant in the permeate, demonstrating the high potential of this approach.

Recent advances of biosurfactant for waste and pollution bioremediation: Substitutions of petroleum-based surfactants

Biosurfactant is one of the emerging compounds in the industrial sector that behaves similarly with their synthetic counterparts, as they can reduce surface and interfacial tension between two fluids. Their unique properties also enable biosurfactant molecules to be able to clump together to form micelles that can capture targeted molecules within a solution. Biosurfactants are compared with synthetic surfactants on various applications for which the results shows that biosurfactants are fully capable of replacing synthetic surfactants in applications including enhanced oil recovery and wastewater treatment applications. Biosurfactants are able to be used in different applications as well since they are less toxic than synthetic surfactants. These applications include bioremediation on oil spills in the marine environment and bioremediation for contaminated soil and water, as well as a different approach on the pharmaceutical applications. The future of biosurfactants in the pharmaceutical industry and petroleum industry as well as challenges faced for implementing biosurfactants into large-scale applications are also discussed at the end of this review.

Ultrasonic-assisted synthesis of zeolite/activated carbon@MnO2 composite as a novel adsorbent for treatment of wastewater containing methylene blue and brilliant blue

In this study, zeolite/activated carbon@MnO₂ composite was used as a novel adsorbent to eliminate methylene blue (MB) and brilliant blue (BB) dyes from aqueous media. To this end, activated carbon (AC) was produced by Ziziphus Spina-Christi leaves and then used to synthesize zeolite/AC@MnO₂ composite. Various analyses such as BET, SEM, EDX, Map, FTIR, and XRD were performed to determine the surface features of the above composite. BET analysis indicated that the aforementioned composite has a mesoporous structure. Also, the best conditions for the adsorption of MB and BB dyes were obtained at pH of 9 and 2, temperature of 25 °C, adsorbent dosage of 1 and 2 g/L, initial dye concentration of 10 mg/L, and contact time of 40 and 60 min, respectively. Under optimal conditions, the utmost removal efficiency of MB and BB dyes using the zeolite/AC@MnO₂ composite was 98.43% and 96.54%, respectively, indicating significant adsorption efficiencies. Moreover, the utmost adsorption capacity of MB and BB dyes was 67.56 and 66.22 mg/g, respectively. Furthermore, intraparticle and film diffusion mechanisms were very important in the adsorption process. Besides, thermodynamic and equilibrium studies indicated that the adsorption process is exothermic, physical, and spontaneous. Generally, the aforementioned composite has a significant adsorption capacity and can be a suitable adsorbent to eliminate cationic dyes from industrial effluents.

Solubilization and separation of o-toluidine and tricyclazole in sodium dodecyl sulfate micelles in micellar enhanced ultrafiltration

The solubilization laws of pollutants in micelles and their separation efficiency are very important in the successfully efficient application of micellar enhanced ultrafiltration (MEUF). The solubilization behavior of o-toluidine (OT) and tricyclazole (TC) into sodium dodecyl sulfate (SDS) micelles in MEUF was studied using nonlinear equation sets for concentration analysis, which resolved the issue on the overlap of absorption spectra of multicomponent compounds restricting the application of conventional ultraviolet (UV) spectroscopic method. The solubilization isotherms for both pollutants could be best explained by the Langmuir-Freudlich model (R²>0.99) followed by the modes of Langmuir and Freudlich, inferring the complexity of solubilization mechanism and solubilization advantage of monolayer over multilayer. The calculated thermodynamic parameters (ΔG⁰, ΔH⁰ and ΔS⁰) indicated that this process was endothermic and spontaneous. The solubilization of OT and TC well followed the pseudo second-order and pseudo first-order kinetics, respectively. The separation and recovery of SDS solubilizing these two pollutants were also investigated through lowering solution temperature to 2 °C followed by centrifugation. The best recovery rate of about 66% for SDS was achieved containing 10 and 5% of each initial amount of OT and TC, respectively, at near-neutral solution pH value. The recovery of SDS could decrease to some extent under alkaline and acidic conditions.

Identification of Insulin-Mimetic Plant Extracts: From an In Vitro High-Content Screen to Blood Glucose Reduction in Live Animals

Type 2 diabetes mellitus (T2DM) is linked to insulin resistance and a loss of insulin sensitivity, leading to millions of deaths worldwide each year. T2DM is caused by reduced uptake of glucose facilitated by glucose transporter 4 (GLUT4) in muscle and adipose tissue due to decreased intracellular translocation of GLUT4-containing vesicles to the plasma membrane. To treat T2DM, novel medications are required. Through a fluorescence microscopy-based high-content screen, we tested more than 600 plant extracts for their potential to induce GLUT4 translocation in the absence of insulin. The primary screen in CHO-K1 cells resulted in 30 positive hits, which were further investigated in HeLa and 3T3-L1 cells. In addition, full plasma membrane insertion was examined by immunostaining of the first extracellular loop of GLUT4. The application of appropriate inhibitors identified PI3 kinase as the most important signal transduction target relevant for GLUT4 translocation. Finally, from the most effective hits in vitro, four extracts effectively reduced blood glucose levels in chicken embryos (in ovo), indicating their applicability as antidiabetic pharmaceuticals or nutraceuticals.

Micellar-Enhanced Ultrafiltration Using a Plant-Derived Surfactant for Dye Separation in Wastewater Treatment

Micellar-enhanced ultrafiltration (MEUF) is one of several membrane methods used for the removal of trace organic pollutants from aqueous streams. In this process, a surfactant is added to a polluted aqueous solution at a concentration higher than its critical micelle concentration (CMC). Unlike synthetic surfactants, natural surfactants, from plants such as the saponin, while ecologically adaptable as surfactants in MEUF systems, are also biodegradable, renewable, and environmentally safe. This study applied Sapindus rarak extract as the natural surfactant in MEUF for Remazol dye separation. It was found that the presence of Sapindus rarak extract increased separation of Remazol red and blue dyes by up to 97.02% and 99.42%, respectively. However, the addition of surfactant decreased permeate fluxes due to membrane fouling and concentration polarization. In addition, loading micelle (Lm), representing the performance of the surfactant micelle for dye separation, as well as the blocking mechanism, was investigated. Lm was found to be in the range of 0.002-0.068 mM dyes/mM saponin. Ultrafiltration blocking mechanisms, as confirmed by the Hermia model, were: standard blocking, for cases without the addition of surfactant; cake formation, for cases with surfactant below the CMC; and complete blocking, for cases with surfactant above the CMC.

Roles of surfactants in pressure-driven membrane separation processes: a review

Surfactants widely exist in various kinds of wastewaters which could be treated by pressure-driven membrane separation (PDMS) techniques. Due to the special characteristics of surfactants, they may affect the performance of membrane filtration. Over the last two decades, there are a number of studies on treating wastewaters containing surfactants by PDMS. The current paper gives a review of the roles of surfactants in PDMS processes. The effects of surfactants on membrane performance were discussed via two aspects: influence of surfactants on membrane fouling and enhanced removal of pollutants by surfactants. The characteristics of surfactants in solution and at solid-liquid interface were summarized. Surfactants in membrane filtration processes cause membrane fouling mainly through adsorption, concentration polarization, pore blocking, and cake formation, and fouling degree may be influenced by various factors (feed water composition, membrane properties, and operation conditions). Furthermore, surfactants may also have a positive effect on membrane performance. Enhanced removal of various kinds of pollutants by PDMS in the presence of surfactants has been summarized, and the removal mechanism has been revealed. Based on the current reports, further studies on membrane fouling caused by surfactants and enhanced removal of pollutants by surfactant-aided membrane filtration were also proposed.

Recovery of High Value-Added Nutrients from Fruit and Vegetable Industrial Wastewater

The industrial processing water of fruit and vegetables has raised serious environmental concerns due to the presence of many important bioactive compounds being disposed in the wastewater. Bioactive compounds have great potential for the food industry to optimize their process and to recover these compounds in order to develop value-added products and to reduce environmental impacts. However, to achieve this goal, some challenges need to be addressed such as safety assurance, technology request, product regulations, cost effectiveness, and customer factors. Therefore, this review aims to summarize the recent advances of bioactive compounds recovery and the current challenges in wastewater from fruit and vegetable processing industry, including fruit and beverage, soybean by-products, starch and edible oil industry. Moreover, future direction for novel and green technology of bioactive compounds recovery are discussed, and a prospect of bioactive compounds reuse and sustainable development is proposed.

Optimization of Microwave-Assisted Extraction Saponins from Sapindus mukorossi Pericarps and an Evaluation of Their Inhibitory Activity on Xanthine Oxidase

A microwave-assisted extraction (MAE) method was applied to separate saponins from Sapindus mukorossi pericarps. The most important factors of the six extraction parameters were selected using Plackett–Burman designs; therefore, the further extraction procedure was optimized using the Box–Behnken designs; meanwhile, the optimum processing parameters and well-pleasing saponins extraction rate were inferred. The final operation conditions were the ethanol concentration of 40%, soaking time of 3 h, particle size of 80–100 meshes, extraction time of 13 min, solvent-solid ratio of 19 mL/g, and microwave power of 425 W. Based on the optimal extraction parameters, the extraction rate of the saponins by means of MAE technique reached 280.55 ± 6.81 mg/g, which exceeds yields acquired using conventional manners. Saponins from S. mukorossi have obvious xanthine oxidase inhibitory properties in vitro compared with allopurinol. The saponins displayed a type of competitive inhibition of xanthine oxidase. In conclusion, a MAE technique in association with a response surface design provides an efficient extraction tactics, which could sufficiently isolate saponins from S. mukorossi pericarps; further, this technique could be applied to the dissociation of other bioactive substances from plant sources. In addition, the saponins may be a promising alternative to conventional medicine to treat gout and other inflammation-associated disorders to mitigate the side effects of traditional drugs.