Synergistic effect of band edge potentials on BiFeO3/V2O5 composite: Enhanced photo catalytic activity

Photocatalytic degradation of cefixime using visible light-driven Z-scheme ZnO nanorod/Zn2TiO4/GO heterostructure

ZnO nanorod along with a Zn₂TiO₄/GO heterostructure with enhanced charge transfer capability was synthesized by a facile sol-gel method. FT-IR, XRD, XPS, TEM, SEM, EDX, UV-Vis DRS, photocurrent response and PL analyses were applied to characterize the as-prepared photocatalysts. To investigate the photocatalytic activity of the composite, Cefixime (CEF) removal under visible light was evaluated. The ZnO nanorod/Zn₂TiO₄/GO, including 65 wt% ZnO and 3 wt% graphene oxide, showed the highest CEF degradation and was selected as the optimal ternary composite. Reduction of electron-hole pair recombination rate, successful interfacial charge transfers, and more visible light reception in the Z-scheme system were the important reasons for improving the photocatalytic properties of ZnO nanorod/Zn₂TiO₄/GO. Effective operating parameters in the CEF photocatalytic removal process were optimized employing the response surface method and were as follows: photocatalyst dosage = 0.88 g/L, pH = 5, radiation time = 115 min, and CEF concentration = 10 ppm. The photocatalytic degradation% of CEF and total organic carbon (TOC) removal% under the optimal conditions were 71.4 and 57.5%, respectively, for the three-component composite indicating the production of intermediate species during the process. This photocatalytic reaction confirmed the first-order kinetic and using the ZnO nanorod/Zn₂TiO₄/GO composite was able to improve the reaction rate by about 2.7 and 6.2 times more than ZnO nanorod/Zn₂TiO₄ and ZnO, respectively. The effects of radiation intensity and temperature were investigated and 175 W/m² and 35 °C were obtained as optimum values. Eventually, according to the trapping test, h⁺, superoxide radical, and hydroxyl radical are the most effective active species in this photocatalytic reaction, respectively.

Photocatalysis and perovskite oxide-based materials: a remedy for a clean and sustainable future

The massive use of non-renewable energy resources by humankind to fulfill their energy demands is causing severe environmental issues. Photocatalysis is considered one of the potential solutions for a clean and sustainable future because of its cleanliness, inexhaustibility, efficiency, and cost-effectiveness. Significant efforts have been made to design highly proficient photocatalyst materials for various applications such as water pollutant degradation, water splitting, CO2 reduction, and nitrogen fixation. Perovskite photocatalyst materials are gained special attention due to their exceptional properties because of their flexibility in chemical composition, structure, bandgap, oxidation states, and valence states. The current review is focused on perovskite materials and their applications in photocatalysis. Special attention has been given to the structural, stoichiometric, and compositional flexibility of perovskite photocatalyst materials. The photocatalytic activity of perovskite materials in different photocatalysis applications is also discussed. Various mechanisms involved in photocatalysis application from wastewater treatment to hydrogen production are also provided. The key objective of this review is to encapsulate the role of perovskite materials in photocatalysis along with their fundamental properties to provide valuable insight for addressing future environmental challenges.

Preparation and properties of floral CaO/ZnO composite from Achatina fulica snail shell

In this study, CaO prepared by calcination treatment from abandoned Achatina fulica shell was used as a raw material, and the floral CaO/ZnO photocatalytic composite material was prepared through co-precipitation method. SEM study showed ZnO with spindle-like petals in the range of 500-1000 nm grown on the surface of CaO carrier. The mapping image shows that the base component of the floral structure is mainly CaO, which is because CaO is not only in the reaction as a carrier, but also creates an alkaline environment in the methanol system, which is advantageous for co-precipitation. UV-vis spectroscopy shows that the visible light absorption of composites has red shifts; besides, PL, EIS, and photocurrent test showed that the composites have stronger electronic hole separation capabilities. The visible light degradation test of rhodamine B showed that CaO/ZnO photocatalytic composite could degrade 90% of the pollutants in 25 min, superior to CaO and ZnO, exhibiting recyclability properties, which is a potential candidate with cost-effective and sustainable photocatalysts.

Bridging and synergistic effect of the pyrochlore like Bi2Zr2O7 structure with robust CdCuS solid solution for durable photocatalytic removal of the organic pollutants

Herein, a strong redox ability photocatalyst of CdCuS solid solution composited with pyrochlore like Bi₂Zr₂O₇ has been fabricated by the simple hydrothermal method. The robust CdCuS solid solution materials perform the supporting role to the Bi₂Zr₂O₇ nano materials. The structural, optical, valence and vibrational states of the prepared heterostructure materials were analyzed using various characterization techniques. The photocatalytic activity of the as-synthesized Bi₂Zr₂O₇/CdCuS heterostructure has been verified under direct solar light and ambient conditions. The synthesized Bi₂Zr₂O₇/CdCuS nano combination exhibits a better photocatalytic activity for the removal of methylene blue and 4-nitrophenol organic probe molecules. The heterostructure formation between the samples is confirmed by HRTEM analysis. The improved rate of the photocatalytic reaction of the samples is attributed to the formation of heterostructures at the interface. The close interfacial contact between the two materials discloses the effective charge transfer, which leads to suppressed charge carrier recombination. The enhanced photo catalytic activity of redox-mediator-free-Bi₂Zr₂O₇/CdCuS heterostructure, possibly will be credited to the robust redox ability and the several charge transfer channels in the tight contact. The chief radicals produced in the catalytic reduction reaction have been predicted by the scavenger trapping methods and the results are discussed in detail. The obtained information from this study on Bi₂Zr₂O₇/CdCuS delivers some new visions for the design of active photocatalysts with multiple benefits.

Photocatalytic degradation mechanism for CdCuS solid solution supported pyrochlore like Bi₂Zr₂O₇.

Superior decontamination of toxic organic pollutants under solar light by reduced graphene oxide incorporated tetrapods-like Ag3PO4/MnFe2O4 hierarchical composites

To fabricate an efficient, eco-friendly and stable photocatalyst, the current work describes a demonstration of simple synthesis approach of Ag₃PO₄/MnFe₂O₄(x wt%)/reduced graphene oxide composites. Ag₃PO₄/MnFe₂O₄ (5 wt%) revealed superior activity for decontamination of dye pollutant. Further, rGO was incorporated with Ag₃PO₄/MnFe₂O₄ (5 wt%) to investigate its effect on their overall properties. The resultant composites were characterized by various analytical techniques to confirm their structural and physical-chemical features. FESEM analysis showed that morphology of Ag₃PO₄ varied significantly from orthorhombic dodecahedrons to tripods and tetrapods with the combinations MnFe₂O₄ (5 wt%), and MnFe₂O₄ (5 wt%)+rGO respectively. The photocatalytic decontamination of toxic organic dyes tested against Rhodamine B(RhB) and 4-Nitrophenol. The outstanding performance for decontamination of RhB was observed for Ag₃PO₄/MnFe₂O₄(5 wt%)/rGO (~99% in 5 min) with the rate of k = 7.28 × 10^-1 min^-1. The enhanced activity of Ag₃PO₄/MnFe₂O₄(5 wt%)/rGO composites credited to co-catalytic effects of MnFe₂O₄ and physiochemical properties of rGO which leads to making intimate contact with Ag₃PO₄ to form heterojunction and rGO served as a medium for charge transfer to prevent their recombination. The incorporation of rGO in Ag₃PO₄/MnFe₂O₄ (5 wt%) composite leads to a considerable increase in the photocatalytic activity by offering improved surface area and properties, high electron stability and mobility. Based on experiment results, the photocatalytic enhancement mechanism for organic pollutants degradation was discussed. The recyclability of Ag₃PO₄/MnFe₂O₄(5 wt%)/rGO hierarchical composite was evaluated by replicated photocatalytic reaction trials. Overall, the morphological transformation of Ag₃PO₄/MnFe₂O₄(5 wt%)/rGO composites played a dynamic role in determining their photocatalytic activity towards the organic industrial dye pollutants.

Highly efficient solar light-driven photocatalytic hydrogen production over Cu/FCNTs-titania quantum dots-based heterostructures

The need for clean and eco-friendly energy sources has increased enormously over the years due to adverse impacts caused by the detrimental fossil fuel energy sources on the environment. This work reports the safest and most efficient route for hydrogen generation using solar light receptive functionalized carbon nanotubes-titania quantum dots (FCNT-TQDs) as photocatalysts under the influence of solar light irradiation. Predominantly, dual capability of CNT as co-catalyst and photo-sensitizer reduced the recombination rate of charge carriers, and facilitated the efficient light harvesting. The bulk production of hydrogen via water harvesting is considered, wherein photocatalyst synthesized was tuned by the optimum addition of copper to achieve higher production rate of hydrogen up to 54.4 mmol h^-1g^-1, nearly 25-folds higher than that of pristine TiO₂ quantum dots. Addition of copper has a crucial role in improving the rate of hydrogen generation. The ternary composite exhibited 5.4-times higher hydrogen production compared to FCNT-TQDs composite.