CH4 control and associated microbial process from constructed wetland (CW) by microbial fuel cells (MFC)

Critical evaluation of electroactive wetlands: traditional and modern advances

In the field of sustainable wastewater management, electroactive wetlands (EW), or constructed wetland-microbial fuel cells (CW-MFC), are an emerging technology. With the growing problem of untreated wastewater, the emphasis must shift to decentralisation of wastewater treatment infrastructure, and CW-MFC can be an excellent choice. This review provides a chronologically organized account of the design and configuration of CW-MFCs developed between 2010 and 2023. The research on CW-MFC has mainly focused on material, positioning and number of electrodes; use of electroconductive media and filler materials; flow regime; algal-based CW-MFC and multistage setups. Compared to traditional constructed wetlands (CW) and microbial fuel cells (MFC), CW-MFCs have a number of advantages, including better treatment efficiency, faster organic matter utilisation, lower capital and land requirements and a smaller carbon footprint. However, there are some limitations as well, such as upscaling and viable electricity generation, which are covered in more detail in the article. Moreover, the economics of this technology is also evaluated. The microbiology of a CW-MFC and its influence on its performance are also elaborated. Recent advancements in this field in terms of design, configuration and performance are discussed. Finally, the knowledge gaps that must be addressed before this technique can be successfully implemented on a large scale are highlighted, along with specific recommendations. This article aims to advocate for EWs as an ideal decentralised wastewater treatment technique, while also shedding light on the areas that still need to be worked on.

A double-edged sword: Constructed wetland-microbial fuel cells promote organics removal via entrapment

Recently, constructed wetland-microbial fuel cells (CW-MFCs) are found to enhance the organics removal via the connection of the external circuit. Yet, it is unclear why the energy output is unmatched with the enhancement of the organics removal. This study compared the dynamic changes of the organics in a CW-MFC microcosm operated under the close circuit and open circuit. As a result, the close circuit facilitated the organics removal by 9 % before the proportional discharge of carbon metabolites. This suggested that organics entrapment should account for the huge loss of carbon recovery; and closing the external circuit could further promote the organics entrapment. Besides, polyhydroxybutyrate was found accumulated in the MFC culture experiment, evidencing that the fed-batch mode of operation could result in a feast-famine pattern of microbial metabolism. Despite the fast organics entrapment during the first hours, prolonging the operation time would lead to continuous carbon gas emission, along with the substantially elevated coulombic efficiency. Together, these results explained the substantial COD removal enhancement with low electricity yield, and cautioned the safe use of the MFC integration to spare the system from overaccumulation of organics.

An Overview of Microbial Fuel Cell Technology for Sustainable Electricity Production

The over-exploitation of fossil fuels and their negative environmental impacts have attracted the attention of researchers worldwide, and efforts have been made to propose alternatives for the production of sustainable and clean energy. One proposed alternative is the implementation of bioelectrochemical systems (BESs), such as microbial fuel cells (MFCs), which are sustainable and environmentally friendly. MFCs are devices that use bacterial activity to break down organic matter while generating sustainable electricity. Furthermore, MFCs can produce bioelectricity from various substrates, including domestic wastewater (DWW), municipal wastewater (MWW), and potato and fruit wastes, reducing environmental contamination and decreasing energy consumption and treatment costs. This review focuses on recent advancements regarding the design, configuration, and operation mode of MFCs, as well as their capacity to produce bioelectricity (e.g., 2203 mW/m2) and fuels (i.e., H2: 438.7 mg/L and CH4: 358.7 mg/L). Furthermore, this review highlights practical applications, challenges, and the life-cycle assessment (LCA) of MFCs. Despite the promising biotechnological development of MFCs, great efforts should be made to implement them in a real-time and commercially viable manner.

Methane emission reduction oriented extracellular electron transfer and bioremediation of sediment microbial fuel cell: A review

Sediment is the internal and external source of water environment pollution, so sediment remediation is the premise of water body purification. Sediment microbial fuel cell (SMFC) can remove the organic pollutants in sediment by electroactive microorganisms, compete with methanogens for electrons, and realize resource recycling, methane emission inhibiting and energy recovering. Due to these characteristics, SMFC have attracted wide attention for sediment remediation. In this paper, we comprehensively summarized the recent advances of SMFC in the following areas: (1) The advantages and disadvantages of current applied sediment remediation technologies; (2) The basic principles and influencing factors of SMFC; (3) The application of SMFC for pollutant removal, phosphorus transformation and remote monitoring and power supply; (4) Enhancement strategies for SMFC in sediments remediation such as SMFC coupled with constructed wetland, aquatic plant and iron-based reaction. Finally, we have summarized the drawback of SMFC and discuss the future development directions of applying SMFC for sediment bioremediation.

Recent advances in constructed wetlands methane reduction: Mechanisms and methods

Constructed wetlands (CWs) are artificial systems that use natural processes to treat wastewater containing organic pollutants. This approach has been widely applied in both developing and developed countries worldwide, providing a cost-effective method for industrial wastewater treatment and the improvement of environmental water quality. However, due to the large organic carbon inputs, CWs is produced in varying amounts of CH₄ and have the potential to become an important contributor to global climate change. Subsequently, research on the mitigation of CH₄ emissions by CWs is key to achieving sustainable, low-carbon dependency wastewater treatment systems. This review evaluates the current research on CH₄ emissions from CWs through bibliometric analysis, summarizing the reported mechanisms of CH₄ generation, transfer and oxidation in CWs. Furthermore, the important environmental factors driving CH₄ generation in CW systems are summarized, including: temperature, water table position, oxidation reduction potential, and the effects of CW characteristics such as wetland type, plant species composition, substrate type, CW-coupled microbial fuel cell, oxygen supply, available carbon source, and salinity. This review provides guidance and novel perspectives for sustainable and effective CW management, as well as for future studies on CH₄ reduction in CWs.

Anode Modification with Fe2O3 Affects the Anode Microbiome and Improves Energy Generation in Microbial Fuel Cells Powered by Wastewater

This study investigated how anode electrode modification with iron affects the microbiome and electricity generation of microbial fuel cells (MFCs) fed with municipal wastewater. Doses of 0.0 (control), 0.05, 0.1, 0.2, and 0.4 g Fe2O3 per the total anode electrode area were tested. Fe2O3 doses from 0.05 to 0.2 g improved electricity generation; with a dose of 0.10 g Fe2O3, the cell power was highest (1.39 mW/m2), and the internal resistance was lowest (184.9 Ω). Although acetate was the main source of organics in the municipal wastewater, propionic and valeric acids predominated in the outflows from all MFCs. In addition, Fe-modification stimulated the growth of the extracellular polymer producers Zoogloea sp. and Acidovorax sp., which favored biofilm formation. Electrogenic Geobacter sp. had the highest percent abundance in the anode of the control MFC, which generated the least electricity. However, with 0.05 and 0.10 g Fe2O3 doses, Pseudomonas sp., Oscillochloris sp., and Rhizobium sp. predominated in the anode microbiomes, and with 0.2 and 0.4 g doses, the electrogens Dechloromonas sp. and Desulfobacter sp. predominated. This is the first study to holistically examine how different amounts of Fe on the anode affect electricity generation, the microbiome, and metabolic products in the outflow of MFCs fed with synthetic municipal wastewater.

Effects of the bioelectrochemical technique on methane emission and energy recovery in constructed wetlands (CWs) and related biological mechanisms

In this study, effects of bioelectrochemical technique on methane emission and energy recovery, and related mechanism underlying microbial competition were investigated. The results showed that running MFC was beneficial in reducing CH₄ emissions and promoting COD removal rates, regardless of whether the plant roots were located at the anode or the cathode. CH₄ emission was significantly higher in open-circuit reactors (6.2 mg m^-2 h^-1) than in closed-circuit reactors (3.1 mg m^-2 h^-1). Plant roots at the cathode had the highest electricity generation and the lowest CH4 emissions. The highest power generation (0.49 V, 0.33 w m^-3) and the lowest CH₄ emissions (2.3 mg m^-2 h^-1) were observed in the reactors where Typha orientalis was planted with plant roots at the cathode. The role of plants in strengthening electron acceptor was greater than that of plant rhizodeposits in strengthening electron donors. Real-time quantitative PCR (q-PCR) and correlation analysis indicated that the mcrA genes and CH₄ emissions were positively correlated (r = 0.98, p < 0.01), while no significant relationship between CH₄ emissions and pmoA genes was observed. Illumina sequencing revealed that more abundant exoelectrogens and denitrifying bacteria were observed when plant roots were located in cathodes. Strictly acetotrophic archae (Methanosaetaceae) were likely the main electron donor competitors with exoelectrogens. The results showed that the location of both plant species and plant roots at the electrode played an important role in CH₄ control and electricity generation. Therefore, it is necessary to strengthen plant configuration to reduce CH₄ emissions, to promote sustainable development of wastewater treatment.

Performance and mechanism of azo dyes degradation and greenhouse gases reduction in single-chamber electroactive constructed wetland system

A single-chamber microbial fuel cell-microbial electrolytic cell with a novel constructed wetland system was proposed for synergistic degradation of congo red and reduction in emissions of greenhouse gases. The closed-circuit system showed higher chemical oxygen demand and congo red removal efficiencies by 98 % and 96 % on average, respectively, than traditional constructed wetland. It could also significantly reduce the emissions of CH₄ and N₂O (about 52 % CO₂-equivalents) by increasing the electron transfer. Microbial community analysis demonstrated that the progressive enrichment of dye-degrading microorganisms (Comamonas), electroactive bacteria (Tolumonas, Trichococcus) and denitrifying microorganisms (Dechloromonas) promoted pollutant removal and electron transfer. Based on gene abundance of xenobiotics biodegradation, the congo red biodegradation pathway was described as congo red → naphthalene and alcohols → CO₂ and H₂O. In summary, the single-chamber closed-circuit system could significantly improve the degradation of congo red and reduce the emissions of greenhouse gases by influencing electron transfer and microbial activity.

The effect of anode potential on electrogenesis, methanogenesis and sulfidogenesis in a simulated sewer condition

Methane emissions from the sewer system are considered to be a non-negligible source of aggravating the greenhouse effect. Meanwhile, the sewer system has long been plagued by sulfide-induced corrosion problems. This study explored the possibility of using a bioelectrochemical system to intensify the competition between electroactive bacteria, methanogens and sulfate-reducing bacteria, thereby reducing the production of methane and sulfide. Dual-chamber bioelectrochemical reactors were constructed and operated in fed-batch mode with the coexistence of Electroactive bacteria, Methanogenic archaea and Sulfate-reducing bacteria. Acetate was supplied as the sole carbon source. The results indicated that electrogenesis induced by the anode potentials of -0.42 V and -0.2 V (vs. Ag/AgCl) had advantages over methanogenesis and sulfidogenesis in consuming acetate. The stimulated electrogenesis by anode potentials resulted in a decrease in pH. Methane production was suppressed in the reactors with anode potentials of -0.42 and -0.2 V compared to open circuit controls. In contrast to methane, the capacity for sulfide production was facilitated in the reactors with the anode potentials of -0.42 V and -0.2 V compared to open circuit controls. 16s rRNA gene analysis showed that Geobacter was the most abundant genus on the anode biofilm in the anode potential-controlled reactor, while acetoclastic methanogens dominated in open circuit controls. Methanosaeta and Methanosarcina were the most abundant methanogens in open circuit controls. Collectively, our study demonstrates that the use of electrodes with anode potential control can help to control methane emissions, but could not yet prevent sulfide production, which requires further research.

Integration of MFC reduces CH4, N2O and NH3 emissions in batch-fed wetland systems

The combination of microbial fuel cells (MFCs) with constructed wetlands (CWs) for enhancing water purification efficiency and generating bioelectricity has attracted extensive attention. However, the other benefits of MFC-CWs are seldom reported, especially the potential for controlling gaseous emissions. In this study, we have quantitatively compared the pollutant removal efficiency and the emission of multiple gases between MFC-CWs and batch-fed wetland systems (BF CWs). MFC-CWs exhibited significantly (p < 0.01) higher COD, NH₄⁺-N, TN, and TP removal efficiencies and significantly (p < 0.01) lower global warming potential (GWP) than BF CWs. The integration of MFC decreased GWP by 23.88% due to the reduction of CH₄ and N₂O fluxes, whereas the CO₂ fluxes were slightly promoted. The quantitative PCR results indicate that the reduced N₂O fluxes in MFC-CWs were driven by the reduced transcription of the nosZ gene and enhanced the ratio of nosZ/(nirS + nirK); the reduced CH₄ fluxes were related to pomA and mcrA. Additionally, the NH₃ fluxes were reduced by 52.20% in MFC-CWs compared to BF CWs. The integration of MFC promoted the diversity of microbial community, especially Anaerolineaceae, Saprospiraceae and Clostridiacea. This study highlights a further benefit of MFC-CWs and provides a new strategy for simultaneously removing pollutants and abating multiple gas emissions in BF CWs.

Recycled utilization of ryegrass litter in constructed wetland coupled microbial fuel cell for carbon-limited wastewater treatment

To solve wetland plant litter disposal and improve the nitrogen removal of carbon-limited wastewater, the integration of microbial fuel cell (MFC) and recycled utilization of ryegrass litter planted in constructed wetland (CW) may be effective. CW and MFC-CW with periodical ryegrass litter addition (10 days one cycle) were constructed to study the effects of ryegrass litter on nitrogen removal, electricity production and microorganism community. The results showed that total nitrogen removal of CW and MFC-CW after ryegrass litter addition reached 80.54 ± 10.99% and 81.94 ± 7.30%, increased by 22.19% and 17.50%, respectively. Three-dimensional excitation emission matrix fluorescence spectroscopy results revealed that the soluble organic matters produced by the hydrolyzed ryegrass litter were mainly tryptophan, tyrosine and fulvic acid, which promoted the growth of microorganisms and denitrification. The dosage of 200 g m^-2 did not cause the rise of refractory organic matter in the effluent. The ryegrass litter addition promoted the average voltage and power density slightly in MFC-CW, but the internal resistance also increased temporarily. Compared to the sole CW, current stimulation caused by MFC not only helped to increase the denitrification, but also accelerated the biomass hydrolysis. MFC could contribute to the enrichment and growth of functional microorganisms related to denitrification and organic degradation, such as Vogesella, Devosia, Thermomonas and Brevibacterium. The bacterial genera involved in the ryegrass litter degradation were mainly Thermomonas, Propionicimonas, TM7a, Clostridium_sensu_stricto_1 and so on. This study provided a promising way for practical applications of MFC-CW in the treatment of carbon-limited wastewater, especially in small ecological facilities.

Performance of pilot-scale constructed wetland osmotic microbial fuel cell under different gravel conditions

This paper explores the performance of pilot-scale constructed wetland osmotic microbial fuel cell (CW-OMFC) in different gravel conditions. The performance was measured in terms of power generation, water flux, chemical oxygen demand (COD) removal, and coulombic efficiency. The CW-OMFC was divided into four sections based on the porosity of the materials. The surface area of materials at Side A, Side B, Side C, and Side D were 2.717 m².g^-1, 0.228 m².g^-1, 0.095 m².g^-1, and 0.072 m².g^-1, respectively. The CW-OMFC achieved maximum water flux, minimum reverse salt flux, high power density, and COD removal efficiency of 6.66 ± 0.5 L.m^-2.h^-1, 3.33 ± 1.2 g.m^-2.h^-1, 59.53 ± 10 mW.m^-2 and 84.69%, respectively, by using high porous materials. The nutrients (nitrogen, phosphorus, and potassium) uptake by plants from wastewater were 12.17%, 12.01%, and 21.73%, respectively.

Performance optimization and microbial community evaluation for domestic wastewater treatment in a constructed wetland-microbial fuel cell

Constructed wetland-microbial fuel cell system (CW-MFC), an attractive technology still under study, has shown to improve domestic wastewater treatment efficiency and generate bioelectricity. This work investigated the effect of multiple factors on the performance optimization for the pollutants removal and bioelectricity production compared to a traditional CW, including influent chemical oxygen demand (COD) concentration, hydraulic retention time (HRT) and external resistance. The results showed that the optimal operating conditions of COD concentration, HRT and external resistance for CW-MFC were 200 mg/L, 24 h and 1000 Ω, respectively. The average COD, NH₄⁺-N, NO₃^--N and TP removal efficiencies were 6.06%, 3.85%, 3.68% and 3.68% higher than these in CW system, respectively. Meanwhile, the maximum output voltage and power density of CW-MFC were 388 ± 12 mV and 107.54 mW/m³. In addition, the microbial community analysis indicated that the pollution removal and bioelectricity generation might benefit from the gradual enrichment of electroactive bacteria (Tolumonas) and denitrifying bacteria (Denitratisoma, Methylotenera and Sulfuritales). The findings can provide the optimum operation parameters and mechanism insight for the performance of CW-MFC systems.

Enhancement of nitrogen removal and energy recovery from low C/N ratio sewage by multi-electrode electrochemical technology and tidal flow via siphon aeration

In view of the difficulty in denitrification of low C/N ratio wastewater, electrochemical technology with multiple electrodes and tidal flow method via siphon aeration were used to enhance the denitrification process. At the same time, because of the low phosphorus removal efficiency in traditional activated sludge process, the constructed wetland and microbial fuel cell (CW-MFC) reactor with dewatered alum sludge (DAS) as substrate were constructed. In addition, the REDOX conditions of the reactor were changed by siphon, which significantly improved the removal efficiency of N and P and the energy recovery capacity of the reactor. In the 172 d, the Tidal Flow Constructed Wetland-Microbial Fuel Cell (TF CW-MFC) had the highest removal efficiency of COD and total nitrogen (TN), which were 97.4% and 83.4%, respectively. Although the removal rate of total phosphorus (TP) by TF CW-MFC was lower than artificial aeration, it can still reached 89.0%. The removal effect of aromatic protein substances in water was also significant. The amount of electrons generated by the artificial aeration anode and the amount of oxygen generated by the cathode were not enough to match. The voltage of TF CW-MFC was significantly higher than artificial aeration, around 350 mV, and the maximum power density was 98.16 mW m^-3. In addition, MFC had an inhibitory effect on CW methane emissions. The analysis of the microbial community structure showed that most of the dominant bacteria of TF CW-MFC belonged to the Proteobacteria, Actinobacteria and Chloroflexi. These results showed that the TF CW-MFC technology as a zero-energy oxygen supply mode had high efficiency in the treatment of low C/N ratio wastewater and also had the environmental effect of reducing methane emissions. This study suggests that this green wastewater treatment technology has potential application value.

Contribution of configurations, electrode and membrane materials, electron transfer mechanisms, and cost of components on the current and future development of microbial fuel cells

Microbial fuel cells (MFCs) are a technology that can be applied to both the wastewater treatment and bioenergy generation. This work discusses the contribution of improvements regarding the configurations, electrode materials, membrane materials, electron transfer mechanisms, and materials cost on the current and future development of MFCs. Analysis of the most recent scientific publications on the field denotes that dual-chamber MFCs configuration offers the greatest potential due to the excellent ability to be adapted to different operating environments. Carbon-based materials show the best performance, biocompatibility of carbon-brush anode favors the formation of the biofilm in a mixed consortium and in wastewater as a substrate resembles the conditions of real scenarios. Carbon-cloth cathode modified with nanotechnology favors the conductive properties of the electrode. Ceramic clay membranes emerge as an interesting low-cost membrane with a proton conductivity of 0.0817 S cm^-1, close to that obtained with the Nafion membrane. The use of nanotechnology in the electrodes also enhances electron transfer in MFCs. It increases the active sites at the anode and improves the interface with microorganisms. At the cathode, it favors its catalytic properties and the oxygen reduction reaction. These features together favor MFCs performance through energy production and substrate degradation with values above 2.0 W m^-2 and 90% respectively. All the recent advances in MFCs are gradually contributing to enable technological alternatives that, in addition to wastewater treatment, generate energy in a sustainable manner. It is important to continue the research efforts worldwide to make MFCs an available and affordable technology for industry and society.

The reduction and fate of antibiotic resistance genes (ARGs) and mobile genetic elements (MGEs) in microbial fuel cell (MFC) during treatment of livestock wastewater

The fate and removal efficiency of antibiotic resistance genes (ARGs) and mobile genetic elements (MGEs) in livestock wastewater by microbial fuel cell (MFC) was evaluated by High-throughput quantitative PCR. The results showed that 137 ARGs and 9 MGEs were detected in untreated livestock wastewater. The ARG number of macrolide-lincosamide-streptogramin group B (MLSB), tetracycline and sulfonamide were relatively higher. Throughout the treatment process, the number and abundance of ARGs and MGEs significantly decreased. The relative abundance of tetracycline, sulfonamide and chloramphenicol resistance genes showed the most obvious decreasing trend, and the relative abundance of MGEs decreased by 75% (from 0.012 copies/16S rRNA copies to 0.003 copies/16S rRNA copies). However, the absolute abundance of beta-lactamase resistance genes slightly increased. The operation process of MFC produces selective pressure on microorganisms, and Actinobacteria were predominant and had the ability to decompose antibiotics. The COD removal rate and TN removal rate of livestock wastewater were 67.81% and 62.09%, and the maximum power density and coulomb efficiency (CE) reached 11.49% and 38.40% respectively. This study demonstrated that although the removal of COD and TN by MFC was limited, MFC was quite effective in reducing the risk of antibiotic toxicity and horizontal gene transfer.

Simultaneous removal of heavy metals and bioelectricity generation in microbial fuel cell coupled with constructed wetland: an optimization study on substrate and plant types

A microbial fuel cell coupled with constructed wetland (CW-MFC) was built to remove heavy metals (Zn and Ni) from sludge. The performance for the effects of substrates (granular activated carbon (GAC), ceramsite) and plants (Iris pseudacorus, water hyacinth) towards the heavy metal treatment as well as electricity generation was systematically investigated to determine the optimal constructions of CW-MFCs. The CW-MFC systems possessed higher Zn and Ni removal efficiencies as compared to CW. The maximal removal rates of Zn (76.88%) and Ni (66.02%) were obtained in system CW-MFC based on GAC and water hyacinth (GAC- and WH-CW-MFC). Correspondingly, the system produced the maximum voltage of 534.30 mV and power density of 70.86 mW·m^-3, respectively. Plant roots and electrodes contributed supremely to the removal of heavy metals, especially for GAC- and WH-CW-MFC systems. The coincident enrichment rates of Zn and Ni reached 21.10% and 26.04% for plant roots and 14.48% and 16.50% for electrodes, respectively. A majority of the heavy metals on the sludge surface were confirmed as Zn and Ni. Furthermore, the high-valence Zn and Ni were effectively reduced to low-valence or elemental metals. This study provides a theoretical guidance for the optimal construction of CW-MFC and the resource utilization of sludge containing heavy metals.

The role and related microbial processes of Mn-dependent anaerobic methane oxidation in reducing methane emissions from constructed wetland-microbial fuel cell

Anaerobic oxidation of methane (AOM) plays an important role in global carbon cycle and greenhouse gas emission reduction. In this study, an effective green technology to reduce methane emissions was proposed by introducing Mn-dependent anaerobic oxidation of methane (Mn-AOM) and microbial fuel cell (MFC) technology into constructed wetland (CW). The results indicate that the combination of biological methods and bioelectrochemical methods can more effectively control the methane emission from CW than the reported methods. The role of dissimilated metal reduction in methane control in CW and the biochemical process associated with Mn-AOM were also investigated. The results demonstrated that using Mn ore as the matrix and operating MFC effectively reduced methane emissions from CW, and higher COD removal rate was obtained in CW-MFC (Mn) during the 200 days of operation. Methane emission from CW-MFC (Mn) (53.76 mg/m²/h) was 55.61% lower than that of CW (121.12 mg/m²/h). The highest COD removal rate (99.85%) in CW-MFC (Mn) was obtained. As the dissimilative metal-reducing microorganisms, Geobacter (5.10%) was found enriched in CW-MFC (Mn). The results also showed that the presence of Mn ore was beneficial to the biodiversity of CW-MFCs and the growth of electrochemically active bacteria (EAB) including Proteobacteria (35.32%), Actinobacteria (2.38%) and Acidobacteria (2.06%), while the growth of hydrogenotrophic methanogens Methanobacterium was effectively inhibited. This study proposed an effective way to reduce methane from CW. It also provided reference for low carbon technology of wastewater treatment.

Augmentation of microbial fuel cell and photocatalytic polishing technique for the treatment of hazardous dimethyl phthalate containing wastewater

In the present paper, the potentiality of integrating microbial fuel cells (MFCs) with a photocatalytic reactor to maximize the wastewater treatment efficiency with concurrent power generation was explored. Dimethyl phthalate (DMP) and acetic acid (AA) were the employed substrate and the co-substrate, respectively, using Pseudomonas aeruginosa as a biocatalyst. MFCs operated by single substrate showed the maximum power generation of 0.75-3.84 W m^-3 whereas an addition of AA as the co-substrate yielded 3-12 fold higher power generation. Pseudomonas aeruginosa produced phenazine-1-carboxylic acid in DMP-fed MFC as the metabolite whereas AA along with DMP yielded pyocyanin which reduced the charge transfer resistance. Chemical oxygen demand (COD) removal efficiency in the MFCs was circa 62% after 11 days of operation. Thereafter, it further increased albeit with a drastic reduction in power generation. Subsequently, the MFC anolyte was treated in a photocatalytic reactor under visible light irradiation and catalyzed by CuO-gC₃N₄. The performance of photocatalytic reactor was evaluated, with COD and total organic carbon (TOC) removal efficiency of 88% and 86% after 200 min of light irradiation. The present work suggests that the MFC can be integrated with photocatalysis as a sustainable wastewater treatment method with concurrent power generation.

A taxonomy of design factors in constructed wetland-microbial fuel cell performance: A review

The past decade has seen the rapid development of constructed wetland-microbial fuel cell (CW-MFC) technology in many aspects. The first publication on the combination of constructed wetland (CW) and microbial fuel cell (MFC) appeared in 2012, subsequently, research on the subject has grown exponentially to improve the performance of CW-MFCs in their dual roles of wastewater treatment and power generation. Although significant research has been conducted on this technology worldwide, a comprehensive and critical review of effective controlling parameters is lacking. More broadly, research is needed to draw up-to-date conclusions on recent developments and to identify knowledge gaps for further studies. This review paper systematically enumerates and reviews research studies published in this area to determine the key design factors and their role in CW-MFC performance. Moreover, a taxonomy of all CW-MFC design parameters has been synthesised from the literature. Importantly, this original work provides a comprehensive conceptual framework for future researchers, designers, builders, and users to understand CW-MFC technology. Within the taxonomy, parameters are placed in three main categories (physical/environmental, chemical, and biological/electrochemical) and comprehensive details are given for each parameter. Finally, a comprehensive summary of the parameters has been tabulated showing their impact on CW-MFC operation, design recommendations from literature, and the significant research gaps that this review has identified within the existing literature. It is hoped that this paper will provide a clear and rich picture of this technology at its current stage of development and furthermore, will facilitate a deeper understanding of CW-MFC performance for long-term and large-scale development.

Electroactive bacterial community augmentation enhances the performance of a pilot scale constructed wetland microbial fuel cell for treatment of textile dye wastewater

This study evaluated the effect of bioaugmentation of a newly enriched electroactive bacterial community DC5 on the performance of a pilot scale sequential two-step Horizontal Sub-surface flow Constructed Wetland-Microbial Fuel Cell (HSCW-MFC) system treating textile dye wastewater. The system consisted of CW-MFC-1 planted with Fimbristylis ferruginea and CW-MFC-2 planted with consortium of Fimbristylis ferruginea and Elymus repens plant species. Before bioaugmentation, HSCW-MFC system showed 62 ± 2% Chemical Oxygen Demand (COD) and 90 ± 1.5% American Dye Manufacturer's Institute (ADMI) removal and 177.3 mW/m² maximum power density (CW-MFC-1). After bioaugmentation of DC5 into the HSCW-MFC, COD and ADMI removal was enhanced to 74.10 ± 1.75% and 97.32 ± 1.90% with maximum power density of 197.94 mW/m² (CW-MFC-1). The genera Exiguobacterium, Desulfovibrio and Macellibacteroides of DC5 were significantly enriched at the electrodes of HSCW-MFC after bioaugmentation. These results demonstrate that the performance of the CW-MFC treating textile dye wastewater can be improved by bioaugmentation of electroactive bacterial community.

The fate of antibiotic resistance genes (ARGs) and mobile genetic elements (MGEs) from livestock wastewater (dominated by quinolone antibiotics) treated by microbial fuel cell (MFC)

The removal characteristics of antibiotic resistance genes and mobile genetic elements from livestock wastewater (dominated by quinolone antibiotics) treated with MFC were evaluated by High-throughput quantitative (HT-qPCR). The results showed that 144 ARGs and 8 MEGs were detected in the livestock wastewater. After MFC treatment, the number of AGRs decreased as a whole, and the relative abundance of macrolide-lincosamide-streptogramin group B (MLSB) and aminoglycosider decreased by 62.7% and 92.9%, respectively. MGEs decreased by 57.3% and multidrug genes decreased by 90%. After MFC treatment, the absolute abundance of tetracycline in raw sewage decreased by two orders of magnitude from 5.8 × 105 copies L-1 to 5.1.× 103 copies L-1. However, MFC was less efficient in the removal of vancomycin and beta-lactamase genes. It was also found that chloramphenicol resistance genes slightly increased. Illumina sequencing showed that Syntrophobacterales and Synergistales were predominant in MFCs. Desulfovibrio was resistant to high concentration of moxifloxacin hydrochloride. The removal efficiency of MFC for moxifloxacin hydrochloride at a concentration of 5 mg L-1 was 86.55%. The maximum power density and coulomb efficiency were 109.3 mV·cm-3 and 41.97%, respectively. With the increase of antibiotic concentration, the sewage treatment efficiency and electrical performance were inhibited. This study shows that untreated livestock wastewater had a great risk of gene horizontal transfer. Although MFC had limited treatment capacity for high-concentration quinolone wastewater, it is an effective method to reduce ARGs and the risk of horizontal gene transfer.

Simultaneous reduction of antibiotics leakage and methane emission from constructed wetland by integrating microbial fuel cell

In this study, a microbial fuel cell coupled with constructed wetland (CW-MFC) was built to demonstrate that integration of MFC can enhance antibiotics (sulfadiazine (SDZ) and ciprofloxacin (CIP)) removal in CWs and control CH₄ emissions. Better COD and antibiotics removal performance was obtained in CW-MFC. Notably, both reactors can remove more than 90.00% of CIP. A decline in methane fluxes (by 15.29%) was also observed in CW-MFC compared with CW. The presence of Acorus tatarinowii had no obvious effect on antibiotics removal but the application of manganese ore substrate reduced methane emissions. Further study showed that Proteobacteria was enriched on the Mn substrate anode and the relative abundance of Methanothrix was declined. The results suggested that suppression of methanogenesis may be contributed to a low methane flux in CW-MFC. This study will facilitate the application of CW-MFC to treat antibiotics wastewater and control the ecological risks of greenhouse gas emissions.