Gel-encapsulated microorganisms used as a strategy to rapidly recover biofilters after starvation interruption

Decoding the influence of low temperature on biofilm development: The hidden roles of c-di-GMP

Biofilms are widely used and play important roles in biological processes. Low temperature of wastewater inhibits the development of biofilms derived from wastewater activated sludge. However, the specific mechanism of temperature on biofilm development is still unclear. This study explored the mechanism of temperature on biofilm development and found a feasible method to enhance biofilm development at low temperature. The amount of biofilm development decreased by approximately 66 % and 55 % at 4 °C and 15 °C, respectively, as compared to 28 °C. The cyclic dimeric guanosine monophosphate (c-di-GMP) concentration also decreased at low temperature and was positively correlated with extracellular polymeric substance (EPS) content, formation, and adhesion strength. Microbial community results showed that low temperature inhibited the normal survival of most microorganisms, but promoted the growth of some psychrophile bacteria like Sporosarcina, Caldilineaceae, Gemmataceae, Anaerolineaceae and Acidobacteriota. Further analysis of functional genes demonstrated that the abundance of functional genes related to the synthesis of c-di-GMP (K18968, K18967 and K13590) decreased at low temperature. Subsequently, the addition of exogenous spermidine increased the level of intracellular c-di-GMP and alleviated the inhibition effect of low temperature on biofilm development. Therefore, the possible mechanism of low temperature on biofilm development could be the inhibition of the microorganism activity and reduction of the communication level between cells, which is the closely related to the EPS content, formation, and adhesion strength. The enhancement of c-di-GMP level through the exogenous addition of spermidine provides an alternative strategy to enhance biofilm development at low temperatures. The results of this study enhance the understanding of the influence of temperature on biofilm development and provide possible strategies for enhancing biofilm development at low temperatures.

Performance evaluation of H2S and NH3 removal by biological trickling filter reactors with various fillers under heterotrophic conditions

A pilot-scale biological trickling filter (BTF) reactor (13.5 L) packed with different fillers (Pine bark, Cinder, Straw, and MBBR (mobile bed biofilm reactor) filler was employed to evaluate their removal performance of H2S and NH3 after heterotrophic bacterium addition, and some parameters, including different packing heights, empty bed residence time (EBRT), inlet titers, loading ratios, and restart trial, were investigated in this study. According to the experimental results, BTF filled with pine bark exhibited better removal efficiency than other reactors under a variety of conditions. The removal efficiency of H2S and NH3 reached to as high as 81.31 % and 91.72 %, respectively, with the loading range of 3.29-67.70 g/m3·h. Moreover, due to the addition of heterotrophic bacterium, the removal efficiency was enhanced and capable to eliminate majority of H2S and NH3 even though the packing height was reduced to 400 mm. After 15 days of idle, the BTF reactor was able to resume rapidly and execute deodorization with high efficiency. The degradation mechanism was further explored by a thorough examination of microbial species which degraded contaminants, as well as by functional prediction and correlation analyses. In a word, these results laid a foundation for the application of heterotrophic microorganisms in BTF, which could improve the removal efficiency of biological deodorization.

Microbial community evolution and functional trade-offs of biofilm in odor treatment biofilters

Biofilters inoculated with activated sludge are widely used for odor control in WWTP. In this process, biofilm community evolution plays an important role in the function of reactor and is closely related to reactor performance. However, the trade-offs in biofilm community and bioreactor function during the operation are still unclear. Herein, an artificially constructed biofilter for odorous gas treatment was operated for 105 days to study the trade-offs in the biofilm community and function. Biofilm colonization was found to drive community evolution during the start-up phase (phase 1, days 0-25). Although the removal efficiency of the biofilter was unsatisfactory at this phase, the microbial genera related to quorum sensing and extracellular polymeric substance secretion led to the rapid accumulation of the biofilm (2.3 kg biomass/m³ filter bed /day). During the stable operation phase (phase 2, days 26-80), genera related to target-pollutant degradation showed increases in relative abundance, which accompanied a high removal efficiency and a stable accumulation of biofilm (1.1 kg biomass/m³ filter bed/day). At the clogging phase (phase 3, days 81-105), a sharp decline in the biofilm accumulation rate (0.5 kg biomass/m³ filter bed /day) and fluctuating removal efficiency were observed. The quorum quenching-related genera and quenching genes of signal molecules increased, and competition for resources among species drove the evolution of the community in this phase. The results of this study highlight the trade-offs in biofilm community and functions during the operation of bioreactors, which could help improve bioreactor performance from a biofilm community perspective.

Interaction among biofilter microbiome, fecal metabolome and water quality and regulation of sewage discharge in the recirculating aquaculture system of Apostichopus japonicus

With the aggravation of environmental pollution caused by traditional culture of Apostichopus japonicus, the concept of A. japonicus recirculating aquaculture system (RAS) came into being. To plan the sewage discharge time reasonably, we explored the temporal variation of water quality, biofilter microbe and fecal metabolome in RAS and relevant mechanism. The results showed that monitored water quality in RAS were within the safe living range of A. japonicus. Proteobacteria and Desulfobacterota were dominant bacteria in biofilter. The RDA results and correlation heatmap showed that NH₄-N and NO₂-N significantly affected the microbial community composition. The expression pattern of fecal metabolites changed with the passage of time after feeding. And ROC curve analysis and VIP bar chart showed that there were inter group biomarkers with predictive performance, which could help to remind timely sewage discharge. Topological analysis of KEGG pathway enrichment showed that metabolic pathways such as alanine, aspartate and glutamate metabolism changed significantly after feeding (P < 0.01). Additionally, the correlation analysis results showed that biofilter microbe and fecal metabolites were related to water quality (P < 0.05). Combined with the above research results, this study concluded that the RAS could discharge sewage 25-30 h after feeding. These findings were of direct significance to the management of RAS environment and the protection of A. japonicus healthy growth.

Gas-phase degradation of VOCs using supported bacteria biofilms

Herein we report the use of Pseudomonas putida F1 biofilms grown on carbonized cellulosic fibers to achieve biodegradation of airborne volatile organic compounds (VOCs) in the absence of any bulk aqueous-phase media. It is believed that direct exposure of gaseous VOC substrates to biomass may eliminate aqueous-phase mass transfer resistance and facilitate VOC capture and degradation. When tested with toluene vapor as a model VOC, the supported biofilm could grow optimally at 300 p.p.m. toluene and 80% relative humidity, with a specific growth rate of 0.425 day^-1 . During long-term VOC biodegradation tests in a tubular packed bed reactor, biofilms achieved a toluene degradation rate of 2.5 mg g_DCW ^-1  h^-1 during the initial growth phase. Interestingly, the P. putida F1 film kept biodegrading activity even at the stationary nongrowth phase. The supported biofilms with a biomass loading of 20% (wt) could degrade toluene at a rate of 1.9 mg g_DCW ^-1  h^-1 during the stationary phase, releasing CO₂ at a rate of 6.4 mg g_DCW ^-1  h^-1 at the same time (indicating 100% conversion of substrate carbon to CO₂ ). All of these observations promised a new type of "dry" biofilm reactors for efficient degradation of toxic VOCs without involving a large amount of water.

Performance evaluation and microbial community analysis of the biofilter for removing grease and volatile organic compounds in the kitchen exhaust fume

Corncob-based activated carbon has very good adsorption performance and can provide a favourable growing environment for microorganisms. In this study, a biofilter packed with corncob-based activated carbon was constructed to remove grease and total volatile organic compounds (TVOCs) in kitchen exhaust fume. Results show that the biofilter was suitable for the biodegradation of grease and VOCs, and the maximum elimination capacities (EC_max) were 112 and 235 g/(m³·h) at an empty bed residence time of 3.24 s, respectively. When the pH of the filler dropped to 5.0 ± 0.2, the removal efficiencies (RE) of grease and TVOCs in the biofilter decreased to the minimum values (75% and 77%, respectively). The REmax were respectively 88 ± 4% (for TVOC) at 70% filler moisture content and 90 ± 3% (for grease) at 76% filler moisture content. Molecular characterization results showed Thermobacillus sp. as dominating microbial group in the packing media.

Evaluation of Immobilization of Selected Peat-Isolated Yeast Strains of the Species Candida albicans and Candida subhashii on the Surface of Artificial Support Materials Used for Biotrickling Filtration

The paper describes the process of n-butanol abatement by unicellular fungi, able to deplete n-butanol content in gas, by using n-butanol as source of carbon. Isolated and identified fungi species Candida albicans and Candida subhashii were subjected to a viability process via assimilation of carbon from hydrophilic and hydrophobic compounds. The isolates, which exhibited the ability to assimilate carbon, were immobilized on four different types of artificial support materials used for biotrickling filtration. Application of optical microscopy, flow cytometry and the tests employing propidium iodide and annexin V revealed viability of the fungi isolated on support materials’ surfaces at the average level of 95%. The proposed method of immobilization and its evaluation appeared to be effective, cheap and fast. Based on performed comparative analyses, it was shown that polyurethane foam and Bialecki rings (25 × 25) could be attractive support materials in biotrickling filtration.