Fe3O4 nanoparticles loading on cow dung based activated carbon as an efficient catalyst for catalytic microbubble ozonation of biologically pretreated coal gasification wastewater

Novel cow dung-doped sludge biochar as an efficient ozone catalyst: Synergy between graphitic structure and defects induces free radical pathways

A composite material, cow dung-doped sludge biochar (Zn@SBC-CD), was synthesized by one-step pyrolysis using ZnCl2 as an activating agent and applied to a catalytic ozonation process (COP) for methylene blue (MB) removal. SEM, XRD, FTIR, XPS and BET analyses were performed to characterize the biochar (BC) catalysts. Zn@SBC-CD had high graphitization degree, abundant active sites and uniform distribution of Zn on its surface. Complete removal of MB was achieved within 10 min, with a removal rate much higher than that of ozone alone (32.4%), implying the excellent ozone activation performance of Zn@SBC-CD. The influence of experimental parameters on MB removal efficiency was examined. Under the optimum conditions in terms of ozone dose 0.04 mg/mL, catalyst dose 400 mg/L and pH 6.0, COD was completely removed after 20 min. Electron paramagnetic resonance (EPR) analysis revealed radical and non-radical pathways were involved in MB degradation. The Zn@SBC-CD/O3 system generated superoxide anion radicals (•O2-), which were the main active species for MB removal, through adsorption, transformation, and transfer, Furthermore, Zn@SBC-CD exhibited good reusability and stability in cycling experiments. This study provides a novel approach for the utilization of cow dung and sludge in synthesis of functional biocatalysts and application in organic wastewater treatment.

Coagulation and ozonation treatment of biologically treated wastewater from recycled paper pulping industry: effect on the change of organic compounds

Recycled paper pulping wastewater (RPPW) will cause serious environmental problems due to the high loads of dissolved organic matter (DOM) and toxic components. In the present work, the degradation of DOM in the biologically treated RPPWs (cardboard wastewater (CW) and corrugated container wastewater (CCW)) by a combined coagulation and ozonation process was investigated. The optimal chemical oxygen demand (COD) removal of CW reached 73.64% at aluminum sulfate (Al2(SO4)3) dosage of 800 mg/l, aeration aperture of 10 μm, pH of 9, hydrogen peroxide (H2O2) dosage of 100 mg/l, and reaction time of 70 min. The optimal COD removal of CCW reached 55.76% at a poly-aluminum chloride (PAC) dosage of 700 mg/l, H2O2 dosage of 140 mg/l, and reaction time of 50 min. This study provided some insights into the change of DOM during the combined treatment through the use of UV-Vis spectroscopy and excitation-emission matrix spectroscopy (EEM). PAC and Al2(SO4)3 removed high molecular weight organic such as lignin and lignin-derived compounds to improve the biodegradability of the wastewater. Ozone oxidized high molecular weight organic with complex functional groups to low molecular weight organic with simple functional groups and even mineralization, and this phenomenon resulted in the COD of ozonation effluent significantly reduced. Thus, the results presented in this study support the application of the combined coagulation and ozonation process in treating RPPW.

Application, mechanism and prospects of Fe-based/ Fe-biochar catalysts in heterogenous ozonation process: A review

A growing number of novel organic contaminants have escalated the demands and challenges for water treatment technology. Advanced oxidation processes based on ozone have the advantage of strong oxidative capacity and higher efficiency, which have promising application prospects in the treatment of refractory organic contaminants. Biochar has attracted a lot of interest in recent years in wastewater treatment owing to its porous structure, portable preparation and outstanding stability. Moreover, iron species are widely used in catalytic ozonation owing to their magnetic polarization, vast abundance and low price. Despite a plethora of research on Fe-based catalysts in ozonation process, the heterogeneous catalytic ozonation with Fe-loaded biochar lacks a comprehensive compendium. This review intends to introduce the research progress on Fe-based catalysts and Fe-loaded biochar in heterogeneous catalytic ozonation progress, summarize and further explore the mechanisms and detection techniques of various active components in catalytic ozonation, as well as providing fresh insights for future research.

Adsorption and Desorption Study of Reusable Magnetic Iron Oxide Nanoparticles Modified with Justicia adhatoda Leaf Extract for the Removal of Textile Dye and Antibiotic

The release of tetracycline hydrochloride (TCH) and methylene blue (MB) dye into the aquatic system uncontrollably caused major environmental and health problems; hence, their prevention required serious attention. Adsorption process is now being researched in order to increase adsorption efficiency and reprocess to alleviate environmental issues. The use of magnetic nanoparticle as an adsorbent for wastewater treatment has a lot of prospective. A magnetic iron oxide nanoparticle surface modified by Vasaka (Justicia adhatoda) leaf extract (JA-MIONs) is used to give a fast removal approach for MB dye and TCH antibiotics. Dynamic light scattering, UV-Vis and band gap measurement, powder X-ray diffraction, Fourier-transform infrared spectroscopy, and transmission electron microscopy were operated to analyse the formation and size of these magnetic nanoparticles. The impacts of different factors such as contact time (30-150 min), adsorbate concentration (10-50 mg/L), pH (4-10), and adsorbent dose (2-10 mg) were explored. Adsorption kinetics and isotherms show that it follows the pseudo-first-order kinetic and the Freundlich isotherm, with maximum adsorption capacities of 76.92 mg/g for MB and 200 mg/g for TCH at 298 K. The reusability of the JA-MIONs eventually exhibited a decline in the adsorption percentage of MB and TCH after five and four times respectively. After the desorption-adsorption cycles, this adsorbent continued to exhibit significant adsorption capacity. This investigation furnished the significant reference data for the synthesis of JA-MIONs as a novel and auspicious adsorbent for the industrial clean-up of toxic dyes and heavily used antibiotics from water.

Where should Fenton go for the degradation of refractory organic contaminants in wastewater?

Fenton process has become a research hotspot due to the nonselective and efficient degradation of dissolved organic matter (DOM) by ·OH. However, there are still many challenges and bottlenecks for conventional Fenton (CF). This study provides the first comprehensive insight into the mechanisms of DOM degradation by the Fenton process, including the various subcategories of humic substances, emerging trace contaminants, including persistent organic pollutants, endocrine disrupting chemicals, and pharmaceuticals and personal care products, and the interference of humus and low molecular weight organic acids on the removal of trace contaminants. In addition, a statistical comparison of the economics of CF and three types of Fenton-like technologies (Photo-Fenton, Electro-Fenton, and Ultrasonic-Fenton) is conducted based on existing studies, which can be used as a reference for engineering applications. Moreover, a brief overview of the categories and characteristics of heterogeneous Fenton, which have been extensively studied in recent years, and a comparison of their catalysts are presented. In the end, the paper advances a possible future research direction.

Improvement of coal gasification reverse osmosis concentrate treatment by Cu-Co-Mn/AC catalytic ozonation

Approximately 20% of concentrate will be produced from coal gasification wastewater after reverse osmosis treatment. The organic matter contained in the concentrate affects its evaporation crystallisation; therefore, the refractory organics must be removed. In this study, Cu-Co-Mn/AC catalytic ozonation was used to treat reverse osmosis concentrate (ROC). With the addition of the Cu-Co-Mn/AC catalyst, the production of ·OH increased by 82 μmol/L, thereby enhancing the ozonation performance. The pH, ozone dosage, and catalyst dosage all affected the catalytic ozonation performance. By constructing a response surface model, it was found that the catalyst dosage had the most significant effect on the catalytic ozonation performance. The predicted optimal reaction conditions were pH = 9.02, ozone dosage = 1.08 g/L, and catalyst dosage = 1.33 g/L, under which the chemical oxygen demand (COD) removal reached a maximum of 81.49%.

Comparative evaluation of MSW incineration leachate treatment by heterogeneous catalytic O3 and UV/O3: The unexpected contribution of high salinity and overlooked role of excited state

The efficiency and mechanism of heterogeneous catalytic O₃ and UV/O₃ for municipal solid waste (MSW) incineration leachate advanced treatment was systematically compared. Prior to comparison, catalyst used in heterogenous catalytic O₃ and operation parameters for each technology were optimized. The COD removal of CuO@Al₂O₃/O₃ under its optimal parameters was 57.2%, which failed to meet the standard (≥75%). In contrast, the COD removal by UV/O₃ could be 82.3%. The superior efficiency of UV/O₃ over CuO@Al₂O₃/O₃ could be summarized into three aspects: (I) Cu bounded ·OH (≡Cu-O·) preferentially attacked hydrophilic groups, while free hydroxyl radical (·OH) was non-selective, thus UV/O₃ exhibited a unique three-stage mechanism; (II) The oxidation potential of ≡Cu-O· was higher than that of ·OH, therefore was more vulnerable to the negative effect of radical self-quenching; (III) The existence of UV-induced excited states made organics in UV/O₃ more active than in CuO@Al₂O₃/O₃ system, thus high concentration of anions enhanced COD removal in UV/O₃ but affected that in CuO@Al₂O₃/O₃. The study further revealed the characteristics of heterogeneous catalytic O₃ and UV/O₃, and UV induced excited state should be considered in UV-based advanced oxidation processes (AOPs).

Cow Dung-Based Biochar Materials Prepared via Mixed Base and Its Application in the Removal of Organic Pollutants

Cow dung (CD) is a waste product of livestock production. Improper disposal of a large amount of CD will cause environmental pollution. In this work, three biochar materials based on CD (BMCD) were prepared by using three types of base, including KOH, NaOH, and mixed base (MB, a mixture of equal mass NaOH and KOH) as activators to investigate the different physicochemical properties of BMCDs (BMCD-K, BMCD-Na, and BMCD-MB). The objective was to verify the effectiveness of MB activation in the preparation of biochar materials. The results show that MB has an effect on the structural characteristics of BMCDs. In particular, the surface area and total pore volume, the specific surface area, and the total pore volume of BMCD-MB (4081.1 m² g⁻¹ and 3.0118 cm³ g⁻¹) are significantly larger than those of BMCD-K (1784.6 m² g⁻¹ and 1.1142 cm³ g⁻¹) and BMCD-Na (1446.1 m² g⁻¹ and 1.0788 cm³ g⁻¹). While synthetic dye rhodamine B (RhB) and antibiotic tetracycline hydrochloride (TH) were selected as organic pollutant models to explore the adsorption performances, the maximum adsorption capacities of BMCD-K, BMCD-NA and BMCD-MB were 951, 770, and 1241 mg g⁻¹ for RhB, 975, 1051, and 1105 mg g⁻¹ for TH, respectively, which were higher than those of most adsorbents. This study demonstrated that MB can be used as an effective activator for the preparation of biochar materials with enhanced performance.

Advanced oxidation process based on hydroxyl and sulfate radicals to degrade refractory organic pollutants in landfill leachate

As a special type of wastewater produced in the landfill, leachate is mainly composed of organic pollutants, inorganic salts, ammonia nitrogen and heavy metals, and featured by high pollutants concentration, complex composition and large fluctuations in water quality and volume. Biological, chemical and physical methods have been proposed to treat landfill leachate, but much attention has been paid to the advanced oxidation processes (AOPs), due to their high adaptability and organic degradation efficiency. This paper summarizes the recent findings on the AOPs based on hydroxyl radical (OH) (e.g., ozonation and catalyzed ozone oxidations, Fenton and Fenton-like oxidations) and sulfate radical (SO₄^-) (e.g., activated and catalyzed persulfate oxidations), especially the production routes of free radicals and mechanisms of action. When dealing with some special landfill leachates, it is difficult for a single advanced oxidation technology to achieve the expected results, but the synergistic combination with biological or physical methods can produce satisfactory outcomes. Therefore, this paper has summarized the application of these combined treatment technologies on landfill leachate.

Green Synthesis, Characterization and Application of Natural Product Coated Magnetite Nanoparticles for Wastewater Treatment

Adsorption of organic pollutants, toxic metal ions, and removal of harmful bacteria can give us clean and pure drinkable water from wastewater resources. Respective magnetite nanoparticles (MNPs) were synthesized using a cheaper and greener way in an open-air environment with the use of crude latex of Jatropha curcas (JC) and leaf extract of Cinnamomum tamala (CT). Characterization of MNPs had been performed by dynamic light scattering (DLS), Ultraviolet-visible (UV-vis) spectroscopy, Fourier-transform infrared (FTIR) spectroscopy, powdered X-ray diffraction (XRD), and field emission scanning electron microscope (FE-SEM). The size ranges of the synthesized MNPs were observed in between 20-42 nm for JC-Fe₃O₄ and within 26-35 nm for CT-Fe₃O₄ by FE-SEM images. The effect of synthesized magnetic nanoparticles in wastewater treatment (bacterial portion), dye adsorption, toxic metal removal as well as antibacterial, antioxidant, and cytotoxic activities were studied. This purification will lead to an increase in the resources of pure drinking water in the future.