Effect of nickel on the comparative performance of inverse fluidized bed and continuously stirred tank reactors for biogenic sulphur-driven autotrophic denitrification

Intensified denitrification in a fluidized-bed reactor with suspended sulfur autotrophic microbial fillers

Sulfur-based autotrophic denitrification (SAD) is a promising low-carbon approach to tackle nitrate pollution. However, practical SAD reactor implementation faces challenges of slow denitrification rates and prolonged start-up periods. In this work, a fluidized-bed denitrification reactor with suspended composite fillers immobilized with elemental sulfur and SAD bacteria was constructed. The reactor reaches a steady state within the first day of operation. A denitrification rate of 0.61 g N L-1 d-1 was realized, which is 2.4-fold higher than that in the packed-bed reactor. Mixotrophic denitrification prevailed during the start-up period, while the SAD process became the predominant pathway (>70%) after several days of operation. The prevailing bacteria in the fillers, notably Thiobacillus, are enriched during denitrification operations. Overall, this study highlights the impressive denitrification capabilities of the fluidized SAD reactor with microbial fillers, providing valuable insights for enhancing denitrification techniques.

A critical review of inverse fluidized bed reactors-start-up optimization strategies and wastewater treatment

A critical evaluation of strategies used for reducing start-up time and biological wastewater treatment using an inverse fluidized bed reactor (IFBR) was done. The start-up of an IFBR is one of the most important, time-consuming, and limiting steps in wastewater treatment using biofilm reactors. Evaluation of different strategies used by various researchers is helpful in future research works with this reactor. Different types of treated wastewater, the effect of wastewater characteristics, carriers used, and reactor hydrodynamics on the reactor performance were reviewed in detail in the first part. The second part of this review covers the use of an IFBR in the biological treatment of different wastewaters through multiple biochemical pathways and how it helped improve performance compared to other reactors. This will enable the researchers to understand the novelty of an IFBR for wastewater treatment and allow them to use it as a potential reactor.

Effect of salinity stress on nitrogen and sulfur removal performance of short-cut sulfur autotrophic denitrification and anammox coupling system

The effects of salinity on anaerobic nitrogen and sulfide removal were investigated in a coupled anammox and short-cut sulfur autotrophic denitrification (SSADN) system. The results revealed that salinity had significant nonlinear effects on the nitrogen and sulfur transformations in the coupled system. When the salinity was <2 %, the anammox and SSADN activities increased with increasing salinity, and the total nitrogen removal rate, S⁰ production rate, and nitrite production rate were 0.41 kg/(m³·d), 0.37 kg/(m³·d), and 0.28 kg/(m³·d), respectively. With continuous increase of salinity, the performances of the anammox and SSADN gradually decreased, and the three indicators decreased to 0.14 kg/(m³·d), 0.22 kg/(m³·d), and 0.14 kg/(m³·d) at 5 % salinity, respectively. When the salinity reached 5 %, the nitrogen removal contribution of anammox decreased to 68.4 %, while the contribution of the sulfur autotrophic denitrification increased to 31.6 %. The coupled system recovered in a short time after alleviation of the salinity stress, and the SSADN activity recovery was faster than anammox. The microbial community structure and functional microbial abundance in the coupled system changed significantly with increasing salinity, and the functional microbial abundance after recovery was considerably different from the initial state.

Dual utilization of aloe peel: Aloe peel-derived carbon quantum dots enhanced anaerobic co-digestion of aloe peel

Carbon materials have been widely used in anaerobic digestion (AD), but the role of zero-dimensional carbon quantum dots (CQDs) in anaerobic co-digestion (AcoD) has not yet been reported. In this work, the effect of aloe peel-derived CQDs (AP-CQDs) on the AcoD system of aloe peel and dairy manure was investigated. The addition of AP-CQDs accelerants increased the cumulative CH₄ yield from 201.14 to 266.92-339.64 mL/g VS and increased total chemical oxygen demand removal efficiency from 34.72 % to 48.77-57.87 %. The use of a digestate with 0.36 wt.% of AP-CQDs resulted in a thermogravimetric mass loss of 47.15 % and a promising total nutrient content of 46.65 g/kg. The excellent electron exchange capacity of AP-CQDs may facilitate direct interspecies electron transfer during the AD process. Moreover, the use of AP-CQDs can enrich methanogenic microorganisms (Methanosarcina and Methanobacterium). These findings provide a viable strategy for improving methane production and create awareness regarding the dual use of biomass waste.

Insights into the Superior Bioavailability of Biogenic Sulfur from the View of Its Unique Properties: The Key Role of Trace Organic Substances

Elemental sulfur (S0) is widely utilized in environmental pollution control, while its low bioavailability has become a bottleneck for S0-based biotechnologies. Biogenic sulfur (bio-S0) has been demonstrated to have superior bioavailability, while little is known about its mechanisms thus far. This study investigated the bioavailability and relevant properties of bio-S0 based on the denitrifying activity of Thiobacillus denitrificans with chemical sulfur (chem-S0) as the control. It was found that the conversion rate and removal efficiency of nitrate in the bio-S0 system were 2.23 and 2.04 times those of the chem-S0 system. Bio-S0 was not pure orthorhombic sulfur [S: 96.88 ± 0.25% (w/w)]. Trace organic substances detected on the bio-S0 surface were revealed to contribute to its hydrophilicity, resulting in better dispersibility in the aqueous liquid. In addition, the adhesion force of T. denitrificans on bio-S0 was 1.54 times that of chem-S0, endowing a higher bacterial adhesion efficiency on the sulfur particle. The weaker intermolecular binding force due to the low crystallinity of bio-S0 led to enhanced cellular uptake by attached bacteria. The mechanisms for the superior bioavailability of bio-S0 were further proposed. This study provides a comprehensive view of the superior bioavailability of bio-S0 and is beneficial to developing high-quality sulfur resources.

Biofilm carrier type affects biogenic sulfur-driven denitrification performance and microbial community dynamics in moving-bed biofilm reactors

Autotrophic denitrification with biosulfur (ADBIOS) provides a sustainable technological solution for biological nitrogen removal from wastewater driven by biogenic S⁰, derived from biogas desulfurization. In this study, the effect of different biofilm carriers (conventional AnoxK™ 1 and Z-200 with a pre-defined maximum biofilm thickness) on ADBIOS performance and microbiomics was investigated in duplicate moving bed-biofilm reactors (MBBRs). The MBBRs were operated parallelly in continuous mode for 309 days, whilst gradually decreasing the hydraulic retention time (HRT) from 72 to 21 h, and biosulfur was either pumped in suspension (days 92-223) or supplied in powder form. Highest nitrate removal rates were approximately 225 (±11) mg/L·d and 180 (±7) mg NO₃^--N/L·d in the MBBRs operated with K1 and Z-200 carriers, respectively. Despite having the same protected surface area for biofilm development in each MBBR, the biomass attached onto the K1 carrier was 4.8-fold more than that on the Z-200 carrier, with part of the biogenic S⁰ kept in the biofilm. The microbial communities of K1 and Z-200 biofilms could also be considered similar at cDNA level in terms of abundance (R = 0.953 with p = 0.042). A relatively stable microbial community was formed on K1 carriers, while the active portion of the microbial community varied significantly over time in the MBBRs using Z-200 carriers.