Hexametaphosphate cross-linked chitosan beads for the eco-efficient removal of organic dyes: Tackling water quality

Heteroatom doped biochar-aluminosilicate composite as a green alternative for the removal of hazardous dyes: Functional characterization and modeling studies

In this work, a novel nitrogen-doped biochar bentonite composite was synthesized by a single-pot co-pyrolysis method. Batch studies were conducted to evaluate the performance of the developed composite in eliminating synthetic dyes from the aqueous matrix. Energy dispersive X-ray spectroscopy analysis and field emission scanning electron microscopy imaging confirmed the N doping and bentonite impregnation into biochar. X-ray photoelectron spectroscopy analysis revealed that the N atoms were doped interstitially into the carbon matrix of biochar in the form of pyridinic and pyrrolic nitrogen. Simultaneous heteroatom doping and bentonite impregnation reduced the specific surface area to 41.721 m2 g-1 but improved the adsorption capacity of biochar for dye adsorption. Further experimental studies depicted that simultaneous bentonite impregnation and N doping into the biochar matrix is beneficial for direct blue-6 (DB-6) and methylene blue (MB) removal and maximum adsorption capacities of 53.17 mg. g-1 and 41.33 mg. g-1 were obtained for MB and DB-6, respectively, at varying conditions. Adsorption energetics of the dyes with the developed composite portrayed the spontaneity of the process through negative ΔG values. The Langmuir and Freundlich isotherm models fitted the best for MB and DB-6 adsorption. The monolayer adsorption capacity and favourability factor for MB and DB-6 adsorption were calculated to be 54.15 mg. g-1 and 0.217, respectively from the best-fitted isotherms. Based on density functional theory calculations and spectroscopic studies, major interactions governing the adsorption were predicted to be charge-based interactions, π-π interactions, H-bonding, and Lewis acid-base interactions.

Development of Chitosan Polysaccharide-Based Magnetic Gel for Direct Red 83:1 Removal from Water

Water pollution caused by dyes is a significant environmental issue, necessitating the development of effective, cost-efficient decolorization methods suitable for industrial use. In this study, a Chitosan-Fe polymeric gel was synthesized, characterized, and tested for removing the azo dye Direct Red 83:1 from water. The polymeric magnetic chitosan was analyzed using various techniques: Field Emission Scanning Electron Microscopy (FE-SEM) revealed a porous structure, Differential Scanning Calorimetry (DSC) and Thermal Gravimetric Analysis (TGA) demonstrated the thermal stability, Infrared Spectrophotometry (IR) indicated the successful coordination of iron at the C3 position, and X-ray Powder Diffraction (XRD) confirmed the crystalline nature of the polymeric structure. Optimal conditions for kinetic and isotherm models were found at 1 g and pH 7.0. Adsorption behavior of Direct Red 83:1 onto magnetic chitosan gel beads was studied through kinetic tests and isotherm curves. The maximum adsorption capacity was 17.46 mg/g (qmax). The adsorption process followed pseudo-second-order kinetics (R2 = 0.999) and fit the Temkin isotherm (R2 = 0.946), suggesting heterogeneous surface adsorption. The newly synthesized Chitosan-Fe polymeric gel demonstrated good adsorption properties and facilitated easy separation of purified water.

Sustainable remediation of toxic congo red dye pollution using bio based carbon nanocomposite: Modelling and performance evaluation

Remediation of synthetic dyes found in aqueous environment poses a serious challenge for treatment due to their resistance to chemical and biological degradation. This research study investigated the application of Chitosan-ZnO-Seaweed bio nanocomposite in the remediation of congo red. The novel bionanocomposite was characterised by FTIR, SEM, TEM, EDS and XRD studies. The FTIR spectra and SEM images indicated the adsorption of congo red onto the synthesized bionanocomposite. The batch wise experimental studies were done to explore the influence of process variables on removal of congo red from synthetic wastewater and to determine optimized conditions. Under optimized conditions of pH 3, temperature 40 °C, initial congo red concentration 50 mg/L, bionanocomposite quantity 0.03 g/L and interaction period 30 min, the bionanocomposite removed 95.64% of congo red. Thermodynamic studies were carried out and the parameters, ΔH° and ΔS° were found to be 38.386 kJ/mol and 0.1451 kJ/mol. K, respectively. The isotherm and kinetic study showed that monolayer Langmuir model was obeyed (R2 = 0.968) and the experimental value of congo red adsorption correlated well with pseudo second order model (R2 = 0.9938) respectively. The maximum adsorption capacity was found to be 303.03 mg/g. Protonated amino group of chitosan, hydroxyl group of seaweed accounts for congo red adsorption along with zinc oxide.

Synthesis of novel magnetic pitch-based hypercrosslinked polymers as adsorbents for effective recovery of Ag+ with high selectivity

Silver is an important precious metal with superior ductility, electrical and thermal conductivity, photosensitivity, and antibacterial properties. However, without proper recycling and treatment, silver emissions may pose a threat to the human health and subsistence environment due to their toxicity. Therefore, it is environmentally and economically important to recover Ag from waste electronic equipment and anode slime. Herein, carboxyl functionalized modified magnetic nanoparticles (Fe₃O₄@3-phenylglutaricacid nanoparticles) were designed and prepared to obtain the low-cost magnetic pitch-based HCP adsorbents (MPHCP and P-MPHCP). The novelty of present work is that superior adsorption capacity and magnetic responsiveness of adsorbent can be obtained by a simple one-step Friedel-Crafts reaction with very low-cost raw material. The maximum Ag⁺ adsorption capacity of MPHCP and P-MPHCP were 321 and 353 mg/g, respectively. The adsorption was completed within a short duration of 15 min for MPHCP and P-MPHCP at an initial Ag⁺ concentration of 100 mg/L. Moreover, the most selective is P-MPHCP wherein Ag⁺ is α = 61 times more selective than Pb²⁺ at a concentration of 100 mg/L.The adsorption capacity of MPHCP and P-MPHCP towards Ag⁺ still maintains above 89% after ten cycles of adsorption-desorption. This study not only provides new guidance for the development of porous polymeric adsorbents but also provides technical feasibility for the field of recovery and reutilization of precious metals, which has a very extensive practical application prospect.

Adsorption of nitrophenol onto a novel Fe3O4-κ-carrageenan/MIL-125(Ti) composite: process optimization, isotherms, kinetics, and mechanism

Water pollution is a dreadful affair that has incessantly aggravated, exposing our planet to danger. In particular, the persistent nitro aromatic compound like nitrophenols causes anxiety to the researchers due to their hazardous impacts, excessive usage, and removal difficulty. For this purpose, a novel multi-featured composite was constructed based on κ-Carrageenan (κ-Carr), MOF (MIL-125(Ti)), and magnetic Fe3O4 for efficient adsorptive removal of o-nitrophenol (o-NP). Interestingly, BET measurements revealed the high surface area of Fe3O4-κ-Carr/MIL-125(Ti) of about 163.27 m2/g, while VSM showed its excellent magnetic property (20.34 emu/g). The comparison study pointed out the synergistic effect between Fe3O4, κ-Carr, and MIL-125(Ti), forming a composite with an excellent adsorption performance toward o-NP. The adsorption data obeyed pseudo-second-order kinetic model, and Freundlich isotherm model was better fitted than Langmuir and Temkin. Furthermore, Langmuir verified the supreme adsorption capacity of o-NP onto Fe3O4-κ-Carr/MIL-125(Ti) since the computed qmax reached 320.26 mg/g at pH 6 and 25 °C. Furthermore, the XPS results postulated that the adsorption mechanism pf o-NP proceeded via H-bonding, π-π interaction, and electron donor-acceptor interactions. Interestingly, Fe3O4-κ-Carr/MIL-125(Ti) composite retained good adsorption characteristics after reusing for five cycles, suggesting its viable applicability as an efficient, renewable, and easy-separable adsorbent for removing nitro aromatic pollutants.

Arsenic in drinking water: overview of removal strategies and role of chitosan biosorbent for its remediation

Accessibility to clean drinking water often remains a crucial task at times. Among other water pollutants, arsenic is considered a more lethal contaminant and has become a serious threat to human life globally. This review discussed the sources, chemistry, distribution, and toxicity of arsenic and various conventional technologies that are in option for its removal from the water system. Nowadays, biosorbents are considered the best option for arsenic-contaminated water treatment. We have mainly focused on the need and potential of biosorbents especially the role of chitosan-based composites for arsenic removal. The chitosan-based sorbents are economically more efficient in terms of their, low toxicity, cost-effectiveness, biodegradability, eco-friendly nature, and reusability. The role of various modification techniques, such as physical and chemical, has also been evaluated to improve the physicochemical properties of biosorbent. The importance of adsorption kinetic and isotherm models and the role of solution pH and pHPZC for arsenic uptake from the polluted water have also been investigated. Some other potential applications of chitosan-based biosorbents have also been discussed along with its sustainability aspect. Finally, some suggestions have been highlighted for further improvements in this field.

Application of biorefinery by-product of Nigella sativa L. herb for green treatment of synthetic dye impurity in aquatic environment: a circular economy based approach to water purification

In this work, the performance of residual biomass of Nigella sativa L. plant from the process of bio-oil production toward the green removal of synthetic dye pollution from aquatic medium was systematically studied for the first time based on the circular economy strategy. The characterization of material was performed using Electron Microscope of Scanning and Infrared Spectrometer of Fourier Transform. The main process variables like pH, biosorbent amount, synthetic dye loading, and contact duration were optimized by the batch biosorption experiments to achieve the maximum remediation yield. The analyses of kinetics, equilibrium, and thermodynamics were conducted to understand the possible mechanism of purification. The experimental dynamics and equilibrium data were in better agreement with the pseudo-second-order and Langmuir models. For the targeted model synthetic dye compound (C. I. Basic Red 46), the biosorption capacity was obtained as 136.2 mg g^-1 at the optimized conditions of pH of 8, biosorbent amount of 10 mg (100 mg L^-1), synthetic dye loading of 30 mg L^-1, and duration of 360 min. The treatment process was favorable, spontaneous, and physical. The characterization operation showed that the dye molecules were restrained on the rough surface of biosorbent. This study reveals that the reuse of herbal oil refinery residue as a biosorbent can present an economic, efficient, and eco-friendly option for the remediation of synthetic dye pollution in aqueous medium.

Effective mitigation of single-component and mixed textile dyes from aqueous media using recyclable graphene-based nanocomposite

The present study reported the synthesis and utilization of a graphene-based hybrid nanocomposite (MnFe₂O₄/G) to mitigate several synthetic dyes, including methylene blue, malachite green, crystal violet, and Rhodamine B. This adsorbent was structurally analyzed by several physicochemical techniques such as X-ray diffraction, Fourier-transform infrared spectroscopy, scanning electron microscopy, Raman spectroscopy, N₂ adsorption-desorption isotherm measurement, point of zero charge, and Boehm titrations. BET surface area of MnFe₂O₄/G was measured at 382.98 m²/g, which was substantially higher than that of MnFe₂O₄. MnFe₂O₄/G possessed diverse surface chemistry properties with the presence of many functional groups such as carboxylic acid, phenolic, lactone, and basic groups. MnFe₂O₄/G was used to remove synthetic dyes in the aqueous media. The effect of many factors, e.g., concentration (5-50 mg/L), pH (4-10), dose (5-20 mg), and temperature (25-45 °C) on adsorption performance of MnFe₂O₄/G was conducted. Kinetic, isotherm, intraparticle, and thermodynamic models were adopted for investigating adsorption phenomenon of dyes on MnFe₂O₄/G. The maximum adsorption capacity of dyes over MnFe₂O₄/G was found as Rhodamine B (67.8 mg/g) < crystal violet (81.3 mg/g) < methylene blue (137.7 mg/g) < malachite green (394.5 mg/g). Some tests were performed to remove mixed dyes, and mixed dyes in the presence of antibiotics with total efficiencies of 65.8-87.9% after 120 min. Moreover, the major role of π-π stacking interaction was clarified to gain insight into the adsorption mechanism. MnFe₂O₄/G could recycle up to 4 cycles, which may be beneficial for further practical water treatment.

Tackling water security: A global need of cross-cutting approaches

The Virtual Special Issue entitled "Tackling Water Security" is mainly focused on water availability, water quality, management, governance, biotic or abiotic emerging contaminants and policy development in the Anthropocene. The issue is further dedicated to highlight the new opportunities and approaches to elevate the efficiency of water treatment and wastewater reuse. It has undergone an open call for papers and rigorous peer-review process, where each submission has been evaluated by the panel of experts. 43 articles have been selected from 85 submissions that represents the ongoing research and development activities. The message that emerged explicitly from nearly a hundred submissions to this special issue is that there is an urgent global need for cross-cutting approaches for the rational, quick, cost-effective and sustainable solutions for tackling water-security in the Anthropocene.

Advances in biopolymer composites and biomaterials for the removal of emerging contaminants

Domestic, agriculture, and industrial activities contaminate the waterbodies by releasing toxic substances and pathogens. Removal of pollutants from wastewater is critical to ensuring the quality of accessible water resources. Several wastewater treatments are often used. Researchers are increasingly focusing on adsorption, ion exchange, electrostatic interactions, biodegradation, flocculation, and membrane filtration for the efficient reduction of pollutants. Biopolymers are a combination of two or more products produced by the living organisms used to give the desired finished product with a unique attribute. Biomaterials are also similar to traditional polymers by having higher flexibility, biodegradability, low toxicity, and nontoxic secondary byproducts producing ability. Grafting, functionalization, and crosslinking will be used to enhance the characteristics of biopolymers. The present chapter will illustrate some of the important biopolymers and its compos that will impact wastewater treatment in the future. Most commonly used biopolymers including chitosan (CS), activated carbon (AC), carbon-nanotubes (CNTs), and graphene oxide (GO) are discussed. Finally, the opportunities and difficulties for applying adsorbents to water pollution treatment are discussed.

Organic Dyes versus Adsorption Processing

Even in the first quarter of the XXI century, the presence of organic dyes in wastewaters was a normal occurrence in a series of countries. As these compounds are toxic, their removal from these waters is a necessity. Among the separation technologies, adsorption processing appeared as one of the most widely used to reach this goal. The present work reviewed the most recent approaches (first half of the 2021 year) regarding the use of a variety of adsorbents in the removal of a variety of organic dyes of different natures.

Assessment of a novel aminated magnetic adsorbent with excellent adsorption capacity for dyes and drugs

Dyes and drugs with high toxicity and low biodegradability pose risk to human health and ecological security, and should be purified efficiently from effluents before discharge. Traditional adsorbents are limited by the insufficient active adsorption sites and low stability. In this study, a novel aminated magnetic adsorbent (MCTs) was fabricated via two cross-linking steps using chitosan and triethylenetetramine to fill the gaps between current adsorbent and performance requirements. The morphological and physicochemical characteristics of the as-prepared MCTs were determined and identified with the aid of several characterization techniques. The adsorption performance of dyes and drugs was also investigated and represented by their adsorption capacities. In particular, the adsorption capacities of Congo Red, Chicago Sky Blue, Reactive Brilliant Red, and Ibuprofen were 583.11, 465.01, 403.12, and 291.71 mg/g, respectively. They also remained at around 80% after four reuse cycles. MCTs were adsorbed via a monolayer spontaneous chemical reaction, and hydrogen bonding and electrostatic interaction were the dominant adsorption mechanisms. These results demonstrated that the preparation of MCTs via two cross-linking steps enhanced the adsorbents' adsorption capacity, reusability, and stability. They provided a new perspective for the preparation of high-efficient adsorbents and the purification of dye- and drug-polluted wastewater.

Rational design and synthesis of chitosan–quinoa polysaccharide composite aerogel and its adsorption properties for Congo red and methylene blue

This study was performed to investigate the potential application of a chitosan (CS) and quinoa polysaccharide (QS) composite aerogel for the adsorption of dyes from water.