A framework for the evaluation and selection of shoreline surface washing agents in oil spill response

Determination of aquatic hazard concentrations for the oil spill response product class of surface washing agents using species sensitivity distributions

Surface washing agents (SWAs) are a diverse class of oil spill response products intended to facilitate removal of stranded oil from shorelines. This class of agents has high application rates relative to other categories of spill response products, but global toxicity data is generally limited to two standard test species: inland silverside and mysid shrimp. Here, we provide a framework to maximize the utility of limited toxicity data across a product class. To characterize species sensitivity to SWAs, the toxicity of three agents spanning a range of chemical and physical properties were tested in eight species. The relative sensitivity of mysids shrimp and inland silversides as surrogate test organisms was determined. Toxicity normalized species sensitivity distributions (SSDn) were used to estimate fifth centile hazard concentration (HC5) values for SWAs with limited toxicity data. Chemical toxicity distributions (CTD) of SWA HC5 values were used to compute a fifth centile chemical hazard distribution (HD5) to provide a more comprehensive assessment of hazard across a spill response product class with limited toxicity data than traditional single species or single agent approaches can give.

An experimental and modeling study on the penetration of spilled oil into thawing frozen soil

Oil spills are significant environmental accidents that have significant impacts on environmental and ecological health. Spill pollution in the cold regions may pose a particular challenge. To achieve a fast response, the oil transport mode such as penetration should be well understood. In this study, the oil penetration behavior in thawing frozen soil at different temperatures and water contents were investigated. The results showed the penetration behavior of spilled oil in the thawing frozen soil and the influence of salinity level. The modified Green-Ampt model could simulate the penetration process well especially with high water content, relatively cold temperature, and slow thawing rate. This study reveals the new features of oil penetration behavior and distribution patterns in thawing frozen soil under different conditions. Hence, it is of significant importance to support the rapid response measures and reduce the contamination of oil spill accidents in cold regions.

Exploring the characteristics, performance, and mechanisms of a magnetic-mediated washing fluid for the cleanup of oiled beach sand

In the present study, an innovative, environmentally benign recyclable, and magnetically mediated surface washing fluid based on water-dispersible magnetite nanoparticles has been designed and investigated for the cleanup of oiled beach sand. The characterization results showed that the as-prepared magnetite nanoparticles had a spherical morphology with an average diameter of around 250 nm and the particle surface was successfully functionalized with carboxyl groups. The magnetite nanoparticles could be easily re-dispersed by lightly shaking the dispersion after withdrawing the magnet. In addition, prolonging the magnetic field strength and response time promoted the oil recovery from the washing effluent. Thermodynamic modeling was applied to theoretically elucidate the mechanism and the results were in alignment with the experimental findings. Four mechanisms were identified to likely affect surface washing performance. The magnetic fluid had a relatively low operation cost and good reusability for a number of multiple cycles. In terms of other operational limitations, it was noted that washing performance declined as clay (kaolinite) concentrations and salinity values increased. Based on these findings, the proposed stable, low-cost magnetite fluid formulation warrants further investigation as the basis for an operational system for the cleanup of sand beaches contaminated by oil spills.

Development of a calcium alginate-cellulose nanocrystal-based coating to reduce the impact of oil spills on shorelines

It is well known that oil stranded on shoreline substrates can be difficult to remove and cause serious environmental effects. To address this issue, a calcium alginate-cellulose nanocrystal (CA-CNC)-based coating with a unique surface structure and superhydrophobic properties was developed to reduce the extent of shoreline oiling. The results of batch washing test showed that not only did the introduction of CNC not reduce the oil removal efficiency; it also improved the environmental stability of the coating to resist the effects associated with seawater immersion and erosion (especially in the case of 0.4 wt% of CNC). The oil-repellent performance of the coated gravels implied that both oscillation time and oil concentration had almost no effects on the amount of adhered oil. Assessment of oiling prevention based on the laboratory shoreline tank simulator proved the coated gravel performed very well as more oil floated and less oil remained on substrates and penetrated into the subsurface. Biotoxicity analysis showed that the coating powders reduced impacts on the toxicity of the oil to algae at low doses. There is a good potential for the use of this CA-CNC based coating technique to improve shoreline oil spill response.

Environmental Impacts and Challenges Associated with Oil Spills on Shorelines

Oil spills are of great concern because they impose a threat to the marine ecosystem, including shorelines. As oil spilled at sea is transported to the shoreline, and after its arrival, its behavior and physicochemical characteristics change because of natural weathering phenomena. Additionally, the fate of the oil depends on shoreline type, tidal energy, and environmental conditions. This paper critically overviews the vulnerability of shorelines to oil spill impact and the implication of seasonal variations with the natural attenuation of oil. A comprehensive review of various monitoring techniques, including GIS tools and remote sensing, is discussed for tracking, and mapping oil spills. A comparison of various remote sensors shows that laser fluorosensors can detect oil on various types of substrates, including snow and ice. Moreover, current methods to prevent oil from reaching the shoreline, including physical booms, sorbents, and dispersants, are examined. The advantages and limitations of various physical, chemical, and biological treatment methods and their application suitability for different shore types are discussed. The paper highlights some of the challenges faced while managing oil spills, including viewpoints on the lack of monitoring data, the need for integrated decision-making systems, and the development of rapid response strategies to optimize the protection of shorelines from oil spills.

Cleanup of oiled shorelines using a dual responsive nanoclay/sodium alginate surface washing agent

Oil spills may affect ecosystems and endanger public health. In this study, we developed a novel and dual responsive nanoclay/sodium alginate (NS) washing fluid, and systematically evaluated its application potential in oiled shoreline cleanup. The characterization results demonstrated that sodium alginate combined with nanoclay via hydrogen bonds, and was inserted into the interlayer spacing of nanoclay. Adding sodium alginate reduced surface and interfacial tensions, while increasing the viscoelasticity of the washing fluid. Batch experiments were conducted to investigate oil removal performance under various conditions. Additionally, the factorial design analysis showed that three single factors (temperature, oil concentration, and salinity), and two interactive effects (temperature/salinity; and oil concentration/HA) displayed significant effects on the oil removal efficiency of the NS washing fluid. Compared to the commercial surfactants, the NS composite exhibited satisfactory removal efficiencies for treating oily sand. Green materials-stabilized Pickering emulsion can potentially be used for oil/water separation. The NS washing agent displayed excellent pH- and Ca²⁺- responsiveness, generating transparent supernatants with low oil concentration and turbidity. Our work opens an interesting avenue for designing economical, high performance, and green washing agents.

A green initiative for oiled sand cleanup using chitosan/rhamnolipid complex dispersion with pH-stimulus response

The released oil can affect the vulnerable shoreline environment if the oil spills happen in coastal waters. The stranded oil on shorelines is persistent, posing a long-term influence on the intertidal ecosystem after weathering. Therefore, shoreline cleanup techniques are required to remove the oil from the shoreline environment. In this study, a new shoreline cleanup initiative using chitosan/rhamnolipid (CS/RL) complex dispersion with pH-stimulus response was developed for oiled sand cleanup. The results of factorial and single-factor design revealed that the CS/RL complex dispersion maintained high removal efficiency for oiled sand with different levels of oil content in comparison to using rhamnolipid alone. However, the increase of salinity negatively affected the removal efficiency. The electrostatic screening effect of high ionic strength can hinder the formation of the CS/RL complex, and thus reduce removal efficiency. The pH-responsive characteristic of chitosan allows the easy separation of water and oil in washing effluent. The chitosan polyelectrolytes aggregated and precipitated due to the deprotonation of amino groups by adjusting the pH of the washing effluent to above 8. The microscope image demonstrated that the chitosan aggregates wrapped around the oil droplets and settled to the bottom together, thus achieving oil-water separation. Such pH-stimulus response may help achieve an easy oil-water separation after washing. These findings have important implications for developing the new strategies of oil spill response.

3D graphene-based adsorbents: Synthesis, proportional analysis and potential applications in oil elimination

The suitability and efficacy of three-dimensional (3D) graphene, including its derivatives, have garnered widespread attention towards the development of novel, sustainable materials with ecological amenability. This is especially relevant towards its utilization as adsorbents of wastewater contaminants, such as heavy metals, dyes, and oil, which could be majorly attributed to its noteworthy physicochemical features, particularly elevated chemical and mechanical robustness, advanced permeability, as well as large specific surface area. In this review, we emphasize on the adsorptive elimination of oil particles from contaminated water. Specifically, we assess and collate recent literature on the conceptualization and designing stages of 3D graphene-based adsorbents (3DGBAs) towards oil adsorption, including their applications in either batch or continuous modes. In addition, we analytically evaluate the adsorption mechanism, including sorption sites, physical properties, surface chemistry of 3DGBA and interactions between the adsorbent and adsorbate involving the adsorptive removal of oil, as well as numerous effects of adsorption conditions on the adsorption performance, i.e. pH, temperature, initial concentration of oil contaminants and adsorbent dosage. Furthermore, we focus on the equilibrium isotherms and kinetic studies, in order to comprehend the oil elimination procedures. Lastly, we designate encouraging avenues and recommendations for a perpetual research thrust, and outline the associated future prospects and perspectives.

Exploring the use of alginate hydrogel coating as a new initiative for emergent shoreline oiling prevention

Marine oil spills are often reported as a result of activities associated with oil exploration, production and transportation. The spilled oil may reach the shoreline, and then the stranded oil can persist for a long time, exerting many negative effects on coastal ecosystems. Conventional shoreline cleanup methods cannot effectively remove the oil residues from affected areas and are very expensive. Therefore, the use of alginate hydrogel coatings was proposed as a new initiative for emergent shoreline oiling prevention. The alginate hydrogel-coated gravels showed high surface roughness, as well as remarkable water wetting and low-oil-adhesion properties. There was a low oil adhesion on the coated gravels in the continuous test with oil/water emulsion flow, indicating the excellent oil-repellent properties of the coated substrate. The results of batch oil-repellent tests showed that independent of the kind or weathering degree of the oil used, oil can be easily washed out from the coated gravels. The coated gravels had good environmental stability and the slightly partial de-crosslinking of alginate structure would not reduce the oil repellence performance. Moreover, the performance of the alginate hydrogel-coated gravel was further proved with a laboratory shoreline tank simulator, in which more stranded oil floated to the water surface and less oil remained on gravels and entered into subsurface. This proposed oiling prevention method can be used not only for shorelines but also for coastal piers, seaports, and solid manmade shorelines. The coating material is derived from the biomass in the ocean and can be degraded under natural conditions. This study may provide a unique direction for the future development of green oil spill control strategy.

A critical review on the environmental application of lipopeptide micelles

The importance of lipopeptide micelles in environmental applications has been highlighted. These vessels exhibit various sizes, shapes, and surface properties under different environmental conditions. An in-depth understanding of the tunable assembling behavior of biosurfactant micelles is of great importance for their applications. However, a systematic review of such behaviors with assorted micro/nano micellar structures under given environmental conditions, particularly under low temperature and high salinity, remains untapped. Such impacts on their environmental applications have yet to be summarized. This review tried to fill the knowledge gaps by providing a comprehensive summary of the recent knowledge advancement in genetically regulated lipopeptides production, micelles associated decontamination mechanisms in low temperature and high salinity environments, and up-to-date environmental applications. This work is expected to deliver valuable insights to guide lipopeptide design and discovery. The mechanisms concluded in this study could inspire the forthcoming research efforts in the advanced environmental application of lipopeptide micelles.

Disposable masks release microplastics to the aqueous environment with exacerbation by natural weathering

The COVID-19 pandemic has driven explosive growth in the use of masks has resulted in many issues related to the disposal and management of waste masks. As improperly disposed masks enter the ocean, the risk to the marine ecological system is further aggravated, especially in the shoreline environment. The objective of this study is to explore the changing characteristics and environmental behaviors of disposable masks when exposed to the shoreline environment. The transformation of chain structure and chemical composition of masks as well as the decreased mechanical strength of masks after UV weathering were observed. The melt-blown cloth in the middle layer of masks was found to be particularly sensitive to UV irradiation. A single weathered mask can release more than 1.5 million microplastics to the aqueous environment. The physical abrasion caused by sand further exacerbated the release of microplastic particles from masks, with more than 16 million particles released from just one weathered mask in the presence of sand. The study results indicate that shorelines are not only the main receptor of discarded masks from oceans and lands, but also play host to further transformation of masks to plastic particles.