Structural, inorganic, and adsorptive properties of hydrochars obtained by hydrothermal carbonization of coffee waste

Machine learning, conventional and statistical physics modeling of 2,4-Dichlorophenoxyacetic acid (2,4-D) herbicide removal using biochar prepared from Vateria indica fruit biomass

The adsorption properties of 2,4-Dichlorophenoxyacetic acid (2,4-D) onto biochar, obtained through HCl-assisted hydrothermal carbonization process of Vateria indica fruits (VI-BC), were extensively studied using traditional and statistical physics approaches. The traditional adsorption investigations encompassed kinetics, equilibrium, and thermodynamics studies. Subsequently, the Hill statistical physics model was employed to interpret the mechanism. Also, artificial neural network (ANN) and adaptive neuro-fuzzy inference system (ANFIS) machine learning tools were successfully employed to model the adsorption data wherein both models had high prediction potential (R2 > 0.99). The outcomes demonstrated that the produced VI-BC exhibited remarkable adsorptive traits, having a considerable specific surface area (111.54 m2/g), pore size (5.89 nm), a variety of functional groups, and appropriate attributes for efficiently adsorbing 2,4-D. For 10 mg/L 2,4-D, at pH 2.0 and with 0.3 g/L dose, an impressive 91.67% adsorption efficiency was achieved within a 120-min. Pseudo-second-order model aptly depicted the kinetic behavior of 2,4-D adsorption, while the Freundlich model provided a more accurate representation of the isotherms. 2,4-D maximum adsorption capacity stood at 131.39 mg/g at 303 K. The Hill statistical physics model elucidated that the adsorption primarily occurred via physisorption mechanisms, involving electrostatic attractions, π-π conjugation, and pore filling. This conclusion was further substantiated by post-adsorption characterization of the VI-BC. Thermodynamic analysis indicated that the interactions between VI-BC and 2,4-D were favorable, spontaneous, and exothermic. The calculated low energy of adsorption (1.255 kJ/mol) and ΔH° value (-20.49 kJ/mol) further supported physisorption as the dominant mechanism. In summary, this study underscores the significant potential of the newly developed biochar as a promising alternative material for efficiently removing the 2,4-D herbicide from polluted environments.

Study on the auxin-like activity of organic compounds extracted from corn waste hydrochar prepared by hydrothermal carbonization

This work studied the auxin-like activity of liquid and solid hydrochar from aboveground corn biomass prepared using hydrothermal carbonization (HTC). Understanding the action of organic compounds in regulating plant metabolism is important to develop strategies to improve plant growth and production. Bioassays were performed by testing liquid hydrochar concentrations in the range of 0.0557-5570.0 mg carbon L-1; and solid hydrochar (via extracted dissolved organic matter, DOM) in the range of 0.026-2600.0 mg carbon L-1, using seeds of Lactuca sativa. SEM, ATR-FTIR, and Py-GC/MS were applied to assess the effect of HTC on hydrochar production/composition. Liquid hydrochar presented an intense bioactivity, completely inhibiting the germination of testing seeds at higher concentrations. Liquid hydrochar also was considerably more bioactive. Py-GC/MS allowed the identification of the molecules involved in IAA-like effects: carboxylic acids (linear and aromatic) and amino acids. The concentration of more bioactive molecules, rather than their simple presence in the hydrochar fraction, determined the bio-stimulating effect, besides an excellent linear regression between the auxin-like effect and the concentration of active molecules.

Liquid-solid ratio during hydrothermal carbonization affects hydrochar application potential in soil: Based on characteristics comparison and economic benefit analysis

Returning straw-like agricultural waste to the field by converting it into hydrochar through hydrothermal carbonization (HTC) is an important way to realize resource utilization of waste, soil improvement, and carbon sequestration. However, the large-scale HTC is highly limited by the large water consumption and waste liquid pollution. Here, we propose strategies to optimize the liquid-solid ratio (LSR) of HTC, and comprehensively evaluate the stability, soil application potential, and economic benefits of corn stover-based hydrochar under different LSRs. The results showed that the total amount of dissolved organic carbon of hydrochars increased by 55.0% as LSR reducing from 10:1 to 2:1, while the element content, thermal stability, carbon fixation potential, specific surface area, pore volume, and functional group type were not obviously affected. The specific surface area and pore volume of hydrochar decreased by 61.8% and 70.9% as LSR reduced to 1:1, due to incomplete carbonization. According to the gray relation, hydrochar derived at LSR of 10:1 and followed by 2:1 showed greatest relation degree of 0.80 and 0.70, respectively, indicating better soil application potential. However, reducing LSR from 10:1 to 2:1 made the income of single process production increased from -388 to 968 ¥, and the wastewater generation decreased by 80%. Considering the large-scale application of HTC in fields for farmland improvement and environmental remediation, the comprehensive advantages of optimized LSR will be further highlighted.

Nitrogen-doped hydrochar prepared by biomass and nitrogen-containing wastewater for dye adsorption: Effect of nitrogen source in wastewater on the adsorption performance of hydrochar

Dye wastewater has become one of the main risk sources of environmental pollution due to its high toxicity and difficulty in degradation. Hydrochar prepared by hydrothermal carbonization (HTC) of biomass has abundant surface oxygen-containing functional groups, and therefore is used as an adsorbent to remove water pollutants. The adsorption performance of hydrochar can be enhanced after improving its surface characteristics through nitrogen-doping (N-doping). In this study, wastewater rich in nitrogen sources such as urea, melamine and ammonium chloride were selected as the water source for the preparation of HTC feedstock. The N atoms were doped in the hydrochar with a content of 3.87%-5.70%, and mainly in the form of pyridinic-N, pyrrolic-N and graphitic-N, which changed the acidity and basicity of the hydrochar surface. The N-doped hydrochar adsorbed methylene blue (MB) and congo red (CR) in wastewater through pore filling, Lewis acid-base interaction, hydrogen bond, and π-π interaction, and the maximum adsorption capacities of those were obtained with 57.52 mg/g and 62.19 mg/g, respectively. However, the adsorption performance of N-doped hydrochar was considerably affected by the acid-base property of the wastewater. In a basic environment, the surface carboxyl of the hydrochar exhibited a high negative charge and thus an enhanced electrostatic interaction with MB. Whereas, the hydrochar surface was positively charged in an acid environment by binding H⁺, resulting in an enhanced electrostatic interaction with CR. Therefore, the adsorption efficiency of MB and CR by N-doped hydrochar can be tuned by adjusting the nitrogen source and the pH of the wastewater.

Hydrothermal carbonization of cow dung with human urine as a solvent for hydrochar: An experimental and kinetic study

Hydrothermal carbonization (HTC) is the most cost-effective, environmentally friendly, and efficient physicochemical and biochemical process for converting biomass to products with added value. The objective and novelty of this work is to produce and investigate the qualities of hydrochar fuel (as a solid fuel) from cow manure using human urine as a solvent in order to find a suitable replacement for conventional fuel (i.e., coal). HTC based studies were conducted in batch, at three different reaction temperatures (180 °C, 200 °C, and 220 °C) and two different reaction periods (2 and 4 h). For kinetic analysis and reaction mechanism of the combustion behavior of the produced hydrochar, the model free kinetic methods and the z-master plot were used. From the model free kinetics methods, it was observed that the resultant optimum average activation energy and pre-exponential factor for the produced hydrochar at 180 °C and 2 h reaction period (HTC_180_2) were ∼120 kJ/mol and ∼5.59 × 10²⁵ sec^-1, respectively. In addition, the little variation between ΔE_α and ΔH_α (∼10 kJ/mol) suggests that the combustion of produced hydrochar (HTC_180_2) occurred with minimal energy use. Furthermore, the hydrochar exhibited its highest heating value at 200 °C for 4 h (HTC_200_4) which was 1.44 times higher than the raw dung (13.4 MJ/kg) due to the HTC process. The produced hydrochar demonstrated a significant improvement compared to the conventional solvent, i.e. water.

Advances in the utilisation of carbon-neutral technologies for a sustainable tomorrow: A critical review and the path forward

Global industrialisation and overexploitation of fossil fuels significantly impact greenhouse gas emissions, resulting in global warming and other environmental problems. Hence, investigations on capturing, storing, and utilising atmospheric CO2 create novel technologies. Few microorganisms, microalgae, and macroalgae utilise atmospheric CO2 for their growth and reduce atmospheric CO2 levels. Activated carbon and biochar from biomasses also capture CO2. Nanomaterials such as metallic oxides, metal-organic frameworks, and MXenes illustrate outstanding adsorption characteristics, and convert CO2 to carbon-neutral fuels, creating a balance between CO2 production and elimination, thus zeroing the carbon footprint. The need for a paradigm shift from fossil fuels and promising technologies on renewable energies, carbon capture mechanisms, and carbon sequestration techniques that help reduce CO2 emissions for a better tomorrow are reviewed to achieve the world's sustainable development goals. The challenges and possible solutions with future perspectives are also discussed.

Recirculation of activated sludge for coagulant synthesis under hydrothermal conditions

A hypothesis was proposed that the activated sludge was converted into hydrochar full of phenolic hydroxyl and then was made into coagulant by graft copolymerization. The results show that under the addition of HCl, the content of phenolic hydroxyl on the surface of hydrochar (SBC) under hydrothermal conditions increased sharply, up to 1.586 mmol/g, showing that HCl dosage of 0.10 g/g _{dry sludge} and holding time of 4 h was recommended. Under graft copolymerization with the addition of DMC, the coagulant was synthesized. Based on the analysis by FTIR, XPS, zeta potential, etc., the possible synthesis route of coagulant from SBC was that phenolic hydroxyl on SBC was activated by the initiator and then the polymerization between SBC and DMC was triggered. The optimal grafting conditions are gotten. It was named as SBC_{HCl0.10 g, 4 h}-g-DMC_0.7. The removal by SBC_{HCl0.10 g, 4 h}-g-DMC_0.7 on COD and turbidity in domestic wastewater is up to 69% and 93%, respectively. The component of COD indicated that almost all particulate COD and most of colloidal COD are removed. On the contrary, the removal on dissolved COD can be neglected. Most of NH₃-N and P is kept in the wastewater. This is in favor of subsequent reuse and biological treatment.

New trends on green energy and environmental technologies, with special focus on biomass valorization, water and waste recycling: editorial of the special issue

In this editorial piece, the Editors of the Virtual Special Issue (VSI) "New Trends on Green Energy and Environmental Technologies, with Special Focus on Biomass Valorization, Water and Waste Recycling", present summarized data corresponding to the accepted submissions, as well as additional comments regarding the thematic of the VSI. Overall, 83 manuscripts were received, with final publication of those having the highest quality, accepted after peer-reviewing. The Editors think that the result is a set of very interesting papers that increase the knowledge on the matter, and which would be useful for researchers and the whole society.

Spent coffee grounds: A sustainable approach toward novel perspectives of valorization

Coffee is one of the most popular and preferred drinks in the world, being consumed for its refreshing and energizing properties. As a result, the consumption of coffee generates millions of tons of waste, in particular, spent coffee grounds (SCG). On the contrary, food waste recovery is an incredibly sustainable and convenient solution to the growing need for materials, fuels, and chemicals. SCG has been developed as a precious resource of several high value-added products (oil, proteins, minerals, fatty acids, sterols….). Thus, a transformative pathway to a circular economy that involves the valorization of coffee wastes and by-products is currently attracting the attention of researchers worldwide. The potential growth of scientific papers and publications promotes a comprehensive review to determine the research hotspots, knowledge structure, and to consider future avenues and challenges. Therefore, in this paper, we conducted a systematic review based on 275 indexed papers on the composition and valorization of SCG as a prospective environmental source. PRACTICAL APPLICATIONS: SCG can be applied in agro-food industries.