Recovery of value-added products by mining microalgae

Improving Undernutrition with Microalgae

Undernutrition is an important global health problem, especially in children and older adults. Both reversal of maternal and child undernutrition and heathy ageing have become United Nations-supported global initiatives, leading to increased attention to nutritional interventions targeting undernutrition. One feasible option is microalgae, the precursor of all terrestrial plants. Most commercially farmed microalgae are photosynthetic single-celled organisms producing organic carbon compounds and oxygen. This review will discuss commercial opportunities to grow microalgae. Microalgae produce lipids (including omega-3 fatty acids), proteins, carbohydrates, pigments and micronutrients and so can provide a suitable and underutilised alternative for addressing undernutrition. The health benefits of nutrients derived from microalgae have been identified, and thus they are suitable candidates for addressing nutritional issues globally. This review will discuss the potential benefits of microalgae-derived nutrients and opportunities for microalgae to be converted into food products. The advantages of microalgae cultivation include that it does not need arable land or pesticides. Additionally, most species of microalgae are still unexplored, presenting options for further development. Further, the usefulness of microalgae for other purposes such as bioremediation and biofuels will increase the knowledge of these microorganisms, allowing the development of more efficient production of these microalgae as nutritional interventions.

Two-step polyhydroxybutyrate production from hydrogenic effluent by freshwater microalgae Coelastrella sp. KKU-P1 and Acutodesmus sp. KKU-P2 under mixotrophic cultivation

This study aimed to produce PHB using hydrogenic effluent discharged from the biohydrogen production process with freshwater microalgae including Coelastrella sp. KKU-P1, and Acutodesmus sp. KKU-P2. Batch experiments explored the influence of initial pH and hydrogenic effluent concentration, revealing optimal conditions at 10 % (v/v) effluent concentration and a pH of 6.5 for both KKU-P1 and KKU-P2. Subsequently, medium formulation and photoperiods were optimized to maximize biomass and PHB accumulation. The results showed that the optimal condition for PHB accumulation with KKU-P1 and KKU-P2 was nitrogen phosphorus (NP)-limited Bold's Basal Medium (BBM) under dark conditions. A two-step PHB accumulation in the upscale bioreactor was investigated under optimal conditions. The results showed that KKU-P1 achieved maximum PHB, protein, carbohydrate, and lipid contents of 4.57 %, 29.37 %, 24.76 %, and 13.21 %, respectively, whereas KKU-P2 achieved 6.35 %, 31.53 %, 16.16 %, and 4.77 %, respectively. Based on these findings, it appears that a mixotrophic approach under nutrient-limiting conditions is effective for PHB production in both KKU-P1 and KKU-P2 strains.

Algal-based bioplastics: global trends in applied research, technologies, and commercialization

The excessive global demand for plastic materials has resulted in severe plastic waste pollution. Conventional plastics derived from non-renewable fossil fuels are non-biodegradable, leading to significant environmental problems. Algal-based bioplastics represent a more viable, renewable, and sustainable alternative to conventional plastics. They have identical properties and characteristics as conventional plastics while being naturally biodegradable. The potential of the algal biomass value chain has already been well-established by researchers. Here, we review the novel insights on research, technology, and commercialization trends of algal-based bioplastics, encompassing macroalgae and green microalgae/cyanobacteria. Data showed that within the last decade, there has been substantial interest in utilizing microalgae for biopolymer production, with more focus on using cyanobacterial species compared to green algae. Moreover, most of the research conducted has largely focused on the production of PHA or its co-polymers. Since 2011, there have been a total of 55 patents published related to algal-based bioplastics production. To date, ~ 81 entities worldwide (commercial and private businesses) produce bioplastics from algae. Overall results of this study emphasized that even with the economic and social challenges, algae possess a substantial potential for the sustainable development of bioplastics while also addressing the UN's SDGs.

Enhancing biomass and lipid accumulation by a novel microalga for unsterilized piggery biogas slurry remediation

The cost and efficiency of an algal-BS treatment system are determined by the specific microalgal species and BS pretreatment method. This study examines the growth of a novel algae Chlorella sp. YSD-2 and the removal of nutrients from the BS using different pretreatment methods, including dilution ratio and sterilization. The highest biomass production (1.84 g L-1) was achieved in the 1:2 unsterilized biogas slurry, which was 2.03 times higher than that in the sterilized group, as well as higher lipid productivity (17.29 mg L-1 d-1). Nevertheless, the sterilized biogas slurry at a 1:1 dilution ratio exhibited the most notable nutrient-removal efficiency, with COD at 71.97%, TP at 91.32%, and TN at 88.80%. Additionally, the analysis of 16S rRNA sequencing revealed a significant alteration in the indigenous bacterial composition of the biogas slurry by microalgal treatment, with Proteobacteria and Cyanobacteria emerging as the predominant phyla, and unidentified_Cyanobacteria as the primary genus. These findings suggest that Chlorella sp. YSD-2 exhibits favorable tolerance and nutrient-removal capabilities in unsterilized, high-strength biogas slurry, along with high productivity of biomass and lipids. Consequently, these results offer a theoretical foundation for the development of an efficient and economically viable treatment method for algal-BS.

Effects of polystyrene nanoplastics and PCB-44 exposure on growth and physiological biochemistry of Chlorella vulgaris

Both NPs and PCBs are emerging contaminants widely distributed in the environment, and it is worth exploring whether the combination of the two contaminants causes serious pollution and harm. Therefore, we studied the effects of PS-NPs and PCB-44 alone and together after 96 h and 21 d of exposure to C. pyrenoidosa. The results showed that PS-NPs and PCB-44 affected the cell cycle of C. pyrenoidosa and inhibited its normal growth. Under PS-NPs and PCB-44 stress, the relative conductivity of the algal solution increased, the hydrophobicity of the algal cell surface decreased, and the synthesis of chlorophyll a and chlorophyll b was reduced. In addition to physiological, there are biochemical effects on C. pyrenoidosa. PS-NPs and PCB-44 exposure induced oxidative stress with significant changes in the enzymatic activities of SOD and CAT together with MDA content. Moreover, the relative expression of photosynthesis-related genes (psbA, rbcL, rbcS) all responded, negatively affecting photosynthesis. In particular, significant toxic effects were observed with single exposure to PCB-44 and co-exposure to PS-NPs and PCB-44, with similar trends of effects in acute and chronic experiments. Taken together, exposure to PS-NPs and PCB-44 caused negative effects on the growth and physiological biochemistry of C. pyrenoidosa. These results provide scientific information to further explore the effects of NPs and PCBs on aquatic organisms and ecosystems.

Production of safe cyanobacterial biomass for animal feed using wastewater and drinking water treatment residuals

The growing interest in microalgae and cyanobacteria biomass as an alternative to traditional animal feed is hindered by high production costs. Using wastewater (WW) as a cultivation medium could offer a solution, but this approach risks introducing harmful substances into the biomass, leading to significant safety concerns. In this study, we addressed these challenges by selectively extracting nitrates and phosphates from WW using drinking water treatment residuals (DWTR) and chitosan. This method achieved peak adsorption capacities of 4.4 mg/g for nitrate and 6.1 mg/g for phosphate with a 2.5 wt% chitosan blend combined with DWTR-nitrogen. Subsequently, these extracted nutrients were employed to cultivate Spirulina platensis, yielding a biomass productivity rate of 0.15 g/L/d, which is comparable to rates achieved with commercial nutrients. By substituting commercial nutrients with nitrate and phosphate from WW, we can achieve a 18 % reduction in the culture medium cost. While the cultivated biomass was initially nitrogen-deficient due to low nitrate levels, it proved to be protein-rich, accounting for 50 % of its dry weight, and contained a high concentration of free amino acids (1260 mg/g), encompassing all essential amino acids. Both in vitro and in vivo toxicity tests affirmed the biomass's safety for use as an animal feed component. Future research should aim to enhance the economic feasibility of this alternative feed source by developing efficient adsorbents, utilizing cost-effective reagents, and implementing nutrient reuse strategies in spent mediums.

Effect of mariculture wastewater concentrations on high-value production and pollutants removal with bacterial-algal coupling reactor (BACR)

To achieve the goal of cost-effective mariculture wastewater treatment, a novel Bacteria-Algae Coupling Reactor (BACR) integrating acidogenic fermentation with microalgae cultivation was applied for the mariculture wastewater treatment. Currently, there is limited research on the impact of different concentrations of mariculture wastewater on the pollutant removal and the high-value products recovery. In this study, different concentrations (4, 6, 8, and 10 g/L) of mariculture wastewater were treated with BACR. The results showed thatoptimalMW concentrations of 8 g/L improved the growth viability and biochemical components synthetic of Chlorella vulgaris, which increased the potential for high-value products recovery. The BACR exhibited the excellent removal efficiency of chemical oxygen demand, ammonia-nitrogen and total phosphorus with 82.30%, 81.12% and 96.40%, respectively. This study offers an ecological and economic approach to improve the MW treatment through the utilization of a novel bacterial-algal coupling system.

Application of transposon insertion site sequencing method in the exploration of gene function in microalgae

Microalgae are a large group of organisms that can produce various useful substances through photosynthesis. Microalgae need to be genetically modified at the molecular level to become "Chassis Cells" for food, medicine, energy, and environmental protection and, consequently, obtain benefits from microalgae resources. Insertional mutagenesis of microalgae using transposons is a practical possibility for understanding the function of microalgae genes. Theoretical and technical support is provided in this manuscript for applying transposons to microalgae gene function by summarizing the sequencing method of transposon insertion sites.

Bioproducts from microalgae biomass: Technology, sustainability, challenges and opportunities

Microalgae are a potential feedstock for several bioproducts, mainly from its primary and secondary metabolites. Lipids can be converted in high-value polyunsaturated fatty acids (PUFA) such as omega-3, carbohydrates are potential biohydrogen (bioH₂) sources, proteins can be converted into biopolymers (such as bioplastics) and pigments can achieve high concentrations of valuable carotenoids. This work comprehends the current practices for the production of such products from microalgae biomass, with insights on technical performance, environmental and economical sustainability. For each bioproduct, discussion includes insights on bioprocesses, productivity, commercialization, environmental impacts and major challenges. Opportunities for future research, such as wastewater cultivation, arise as environmentally attractive alternatives for sustainable production with high potential for resource recovery and valorization. Still, microalgae biotechnology stands out as an attractive topic for it research and market potential.