How can the addition of extracellular polymeric substances (EPS)-based bioflocculant affect aerobic granular sludge (AGS)?

Metabolomic reveals the responses of sludge properties and microbial communities to high nitrite stress in denitrifying phosphorus removal systems

Nitrite, as an electron acceptor, plays a good role in denitrifying phosphorus removal (DPR); however, high nitrite concentration has adverse affects on sludge performance. We investigated the precise mechanisms of responses of sludge to high nitrite stress, including surface characteristics, intracellular and extracellular components, microbial and metabolic responses. When the nitrite stress reached 90 mg/L, the sludge settling performance was improved, but the activated sludge was aging. FTIR and XPS analysis revealed a significant increase in the hydrophobicity of the sludge, resulting in improve settling performance. However, the intracellular carbon sources synthesis was inhibited. In addition, the components in the tightly bound extracellular polymeric substances (TB-EPS) of sludge were significantly reduced and indicated the disturb of metabolism. Notably, Exiguobacterium emerged as a new genus when face high nitrite stress that could maintaining survival in hostile environments. Moreover, metabolomic analysis demonstrated strong biological response to nitrite stress further supported above results that include the inhibited of carbohydrate and amino acid metabolism. More importantly, some lipids (PS, PA, LysoPA, LysoPC and LysoPE) were significantly upregulated that related enhanced membrane lipid remodeling. The comprehensive analyses provide novel insights into the high nitrite stress responses mechanisms in activated sludge systems.

Enhanced granulation of activated sludge in an airlift reactor for organic carbon removal and ammonia retention from industrial fermentation wastewater: A comparative study

Ammonia retention and recovery from high-nitrogenous wastewater are new concepts being used for nitrogen management. A microaerophilic activated sludge system was developed to convert organic nitrogen into ammonia and retain it for its recovery; however, the settleability of activated sludge remains a challenge. Therefore, this study proposed an aerobic granular sludge system as a potential solution. Two types of sequencing batch reactors-airlift and upflow reactors-were operated to investigate the feasibility of fast granule formation, the performance of organic carbon removal and ammonia retention, and the dynamics of microbial community composition. The operation fed with industrial fermentation wastewater demonstrated that the airlift reactor ensured a more rapid granule formation than the upflow reactor because of the high shear force, and it maintained a superior ammonia retention stability of approximately 85 %. Throughout the operational period, changes in hydraulic retention time (HRT), settling time, and exchange ratio altered the granular particle sizes and microbial community compositions. Rhodocyclaceae were replaced with Comamonadaceae, Methylophilaceae, Xanthomonadaceae, and Chitinophagaceae as core taxa instrumental in granulation, likely because of their extracellular polymeric substance secretion. As the granulation process progressed, a significant decrease in the relative abundances of nitrifying bacteria-Nitrospiraceae and Nitrosomonadaceae-was observed. The reduction of settling time and HRT enhanced granulation and inhibited the activity of nitrifying bacteria. The success in granulation for ammonia conversion and retention in this study accelerates the paradigm shift from ammonia removal to ammonia recovery from industrial fermentation wastewater.

Recovery of structural extracellular polymeric substances (sEPS) from aerobic granular sludge: Insights on biopolymers characterization and hydrogel properties for potential applications

Nowadays, wastewater treatment plants (WWTPs) are transforming into water resource recovery facilities (WRRFs) where the resource recovery from waste streams is pivotal. Aerobic granular sludge (AGS) is a novel technology applied for wastewater treatment. Extracellular polymeric substances (EPS) secreted by microorganisms promote the aggregation of bacterial cells into AGS and the structural fraction of EPS (sEPS) is responsible for the mechanical properties of AGS. sEPS can be extracted and recovered from waste AGS by physico-chemical methods and its characterization is to date of relevant concern to understand the properties in the perspective of potential applications. This study reports on: characterization of sEPS extracted and recovered from AGS; - formation and characterization of sEPS-based hydrogels. Briefly, sEPS were extracted by a thermo-alkaline process followed by an acidic precipitation. sEPS-based hydrogels were formed by a cross-linking process with a 2.5% w/w CaCl₂ solution. The following key-findings can be drawn: i) hydrogels can be formed starting from 1% w/w sEPS on, by diffusion of Ca²⁺ into sEPS network; ii) the Ca/C molar ratio of hydrogels decreased with increasing concentration of sEPS from 1 to 10% w/w; iii) the thermogravimetric and spectroscopic behaviours of sEPS show that the cross-linking reaction mainly involves the polysaccharidic fraction of biopolymers; iv) water-holding capacity up to 99 gH₂O/g_sEPS was registered for 1% w/w sEPS-based hydrogels, suggesting applications in several industrial sectors (i.e. chemical, paper, textile, agronomic, etc.); v) rheological results highlighted a solid-like behaviour (G'≫G") of sEPS-based hydrogels. The power-law fitting of G' vs. sEPS concentration suggests that the expansion of the sEPS network during cross-linking occurs through a percolative mechanism involving the initial formation of sEPS oligomers clusters followed by their interconnection towards the formation of 3D network. These findings provide additional information about the mechanisms of sEPS-based hydrogel formation and reveal the peculiar physico-chemical characteristics of sEPS which nowadays are increasingly gaining interest in the context of resource recovery.

Effects of PFOA on the physicochemical properties of anaerobic granular sludge: Performance evaluation, microbial community and metagenomic analysis

The impact of perfluorooctanoic acid (PFOA) on the anaerobic granular sludge was evaluated through a sequential batch experiment. Results showed that PFOA inhibited the chemical oxygen demand (COD) removal rate of the sludge and the dosage of 100 mg/L PFOA was more obvious. However, this negative effect would gradually weaken with the adaptation of microorganisms. For the 50 mg/L PFOA experimental group, the proteins content in the extracellular polymeric substances (EPS) of the anaerobic granular sludge increased from 1.53 mg/g to 3.65 mg/g. Meanwhile, PFOA inhibited the 2-(p-iodophenyl)-3-(p-nitrophenyl)-5-phenyltetrazolium chloride (INT) activity of the anaerobic granular sludge. Furthermore, 100 mg/L PFOA reduced the relative abundance of Proteobacteria by 5.99% and Longilinea by 1.11%. 100 mg/L PFOA mainly restricted COD removal by affecting the glycolysis process, with the abundances of glucokinase and pyruvate kinase reduced by 8% and 28.1%, respectively. Compared with the control group, the relative abundance of the methyl-coenzyme M reductase alpha subunit increased by 84%, respectively, under 100 mg/L PFOA.

The Role of Extracellular Polymeric Substances in the Toxicity Response of Anaerobic Granule Sludge to Different Metal Oxide Nanoparticles

Wastewater treatment plants (WWTP) are regarded as the last barriers for the release of incompletely separated and recycled nanoparticles (NPs) into the environment. Despite the importance and ubiquity of microbial extracellular polymeric substances (EPSs) in the complex wastewater matrix, the interaction between NPs and EPSs of anaerobic microflora involved in wastewater treatment and the resultant impact on the biomass metabolomics are unclear. Thus, the impacts of different metal oxide (TiO₂, ZnO, and CuO) NPs on functional bacteria in anaerobic granular sludge (AGS) and the possible toxicity mechanisms were investigated. In particular, the binding quality, enhanced resistance mechanism, and chemical fractional contribution of EPSs from AGS against the nanotoxicity of different NPs was assessed. The results showed that CuO NPs caused the most severe inhibition towards acetoclastic and hydrogenotrophic methanogens, followed by ZnO NPs, whereas TiO₂ NPs caused no inhibition to methanogenesis. Excessive EPS production, especially the protein-like substances, was an effective strategy for reducing certain NPs’ toxicity by immobilizing NPs away from AGS cells, whereas the metabolism restriction on inner microorganisms of AGS induced by CuO NPs can deteriorate the protective role of EPS, indicating that the roles of EPS may not be amenable to generalizations. Further investigations with lactate dehydrogenase (LDH) and reactive oxygen species (ROS) assays indicated that there are greatly essential differences between the toxicity mechanisms of metal NPs to AGS, which varied depending on the NPs’ type and dosage. In addition, dynamic changes in the responses of EPS content to different NPs can result in a significant shift in methanogenic and acidogenic microbial communities. Thus, the production and composition of EPSs will be a key factor in determining the fate and potential effect of NPs in the complex biological matrix. In conclusion, this study broadens the understanding of the inhibition mechanisms of metal oxide NPs on the AGS process, and the influence of EPSs on the fate, behavior, and toxicity of NPs.