Tuning of Sm3+ and Er3+-doped TiO2 nanofibers for enhancement of the photocatalytic performance: Optimization of the photodegradation conditions

Incorporation of Hydroquinone in the Synthesis of Bi2Ti2O7-TiO2 Contributes to Higher Efficiency of Hydroquinone Degradation: Preparation, Characterization, and Photocatalytic Mechanism

In this paper, Bi-doped hydroquinone (HDQ) molecularly imprinted TiO2 (Bi-HDQ-TiO2) with the synthesis of Bi2Ti2O7-TiO2 as the main ingredient was developed. Using HDQ as an imprinted molecule, Bi(NO3)3-5H2O was introduced into the synthesis of Bi-HDQ-TiO2, which revealed that bismuth oxide was protected by HDQ in the temperature range of 0-450 °C, and during the gradual increase of the temperature up to 550 °C, the HDQ eluted completely, then the surrounding TiO2 was nucleated by bismuth oxide and bonded with the bismuth oxide, causing all of them to be transformed into Bi2Ti2O7. The excited electrons of the catalyst could be transported efficiently in various surface interfaces, meanwhile inhibiting the complexation of photogenerated carriers, thereby improving the efficiency of photocatalysis. A degradation efficiency of 96.35% of HDQ was achieved under 30 min UV irradiation, indicating that the candidate material has a promising future application in environmental purification or human health.

Light-driven photocatalysis as an effective tool for degradation of antibiotics

Antibiotic contamination has become a severe issue and a dangerous concern to the environment because of large release of antibiotic effluent into terrestrial and aquatic ecosystems. To try and solve these issues, a plethora of research on antibiotic withdrawal has been carried out. Recently photocatalysis has received tremendous attention due to its ability to remove antibiotics from aqueous solutions in a cost-effective and environmentally friendly manner with few drawbacks compared to traditional photocatalysts. Considerable attention has been focused on developing advanced visible light-driven photocatalysts in order to address these problems. This review provides an overview of recent developments in the field of photocatalytic degradation of antibiotics, including the doping of metals and non-metals into ultraviolet light-driven photocatalysts, the formation of new semiconductor photocatalysts, the advancement of heterojunction photocatalysts, and the building of surface plasmon resonance-enhanced photocatalytic systems.

Vanadia as an electron-hole recombination inhibitor on fibrous silica-titania for selective hole oxidation of ciprofloxacin and Congo red photodegradation

Vanadia (V2O5)-incorporated fibrous silica-titania (V/FST) catalysts, which were successfully synthesized using a hydrothermal method followed by the impregnation of V2O5. The catalysts were then characterized using numerous techniques, including X-ray diffraction, field emission scanning electron microscopy, transmission electron microscopy, nitrogen adsorption-desorption analyses, ultraviolet-visible diffuse reflectance spectroscopy, Fourier-transform infrared, X-ray photoelectron spectroscopy, and photoluminescence (PL) analyses. The study found that varying the amount of V2O5 (1-10 wt%) had a significant impact on the physicochemical properties of the FST, which in turn improved the photodegradation efficiency of two organic compounds, ciprofloxacin (CIP) and congo red (CR). 5V/FST demonstrated the best performance in degrading 10 mg L-1 of CIP (83%) and CR (100%) at pH 3 using 0.375 g L-1 catalyst under visible light irradiation within 180 min. The highest photoactivity of 5V/FST is mainly due to higher crystallinity and the highest number of V2O5-FST interactions. Furthermore, as demonstrated by PL analysis, the 5V/FST catalyst has the most significant impact on interfacial charge transfer and reduces electron-hole recombination. The photodegradation of both contaminants follows the Langmuir-Hinshelwood pseudo-first-order model, according to the kinetic study. The scavenger investigation demonstrated that hydroxyl radicals and holes dominated species in the system, indicating that the catalyst effectively generated reactive species for pollutant degradation. A possible mechanism was also identified for FST and 5V/FST. Interestingly, V2O5 acts as an electron-hole recombination inhibitor on FST for selective hole oxidation of ciprofloxacin and congo red photodegradation. Finally, the degradation efficiency of the catalyst remained relatively stable even after five cyclic experiments, indicating its potential for long-term use in environmental remediation.

Metal Oxide Nanostructures (MONs) as Photocatalysts for Ciprofloxacin Degradation

In recent years, organic pollutants have become a global problem due to their negative impact on human health and the environment. Photocatalysis is one of the most promising methods for the removal of organic pollutants from wastewater, and oxide semiconductor materials have proven to be among the best in this regard. This paper presents the evolution of the development of metal oxide nanostructures (MONs) as photocatalysts for ciprofloxacin degradation. It begins with an overview of the role of these materials in photocatalysis; then, it discusses methods of obtaining them. Then, a detailed review of the most important oxide semiconductors (ZnO, TiO₂, CuO, etc.) and alternatives for improving their photocatalytic performance is provided. Finally, a study of the degradation of ciprofloxacin in the presence of oxide semiconductor materials and the main factors affecting photocatalytic degradation is carried out. It is well known that antibiotics (in this case, ciprofloxacin) are toxic and non-biodegradable, which can pose a threat to the environment and human health. Antibiotic residues have several negative impacts, including antibiotic resistance and disruption of photosynthetic processes.

Intensification of the photodegradation efficiency of an emergent water pollutant through process conditions optimization by means of response surface methodology

Heterogeneous photocatalysis has been increasingly investigated during the past years and has been recognized as a promising technique for clean and safe water purification. The current study exploits the advantage of this technique demonstrating that the removal of a biorefractory water pollutant named clofibric acid can be really improved by photocatalysis through a parametric comprehensive investigation and optimization study based on response surface methodology. Its novelty comes from the approach used to enhance the efficiency of the photocatalytic degradation of clofibric acid. A custom central composite design consisting of 49 trials was applied for process modeling and a quadratic robust model was derived based on the analysis of variance for the optimization of the process parameters. The effective removal of the target molecule with about 70% carbon mineralization was achieved under optimal photocatalytic conditions: 1.5 mg/L as the initial concentration of pollutant, 0.61 g/L catalyst, and an irradiation time of 190 min. Further, it was provided that nitrates play a positive role in the removal of this pollutant, while hydrogenocarbonates slow down its elimination. The ecotoxicity evaluation at different trophic levels confirmed the low toxicity of photodegradation by-products. Data analysis demonstrated that response surface methodology is a reliable approach for the optimization of the interactive effects of photocatalytic process parameters and is able to enhance their performance for the complete elimination of this hardly removed water pollutant.