Photoelectrochemical performance of birnessite films and photoelectrocatalytic activity toward oxidation of phenol

Citrate-promoted dissolution of nanostructured manganese oxides: Implications for nano-enabled sustainable agriculture

Nanostructured manganese oxides (nano-MnO_x) have shown great promises as versatile agrochemicals in nano-enabled sustainable agriculture, owing to the coupled benefits of controlled release of dissolved Mn²⁺, an essential nutrient needed by plants, and oxidative destruction of environmental organic pollutants. Here, we show that three δ-MnO₂ nanomaterials consisting of nanosheet-assembled flower-like nanospheres not only exhibit greater kinetics in citrate-promoted dissolution, but also are less prone to passivation, compared with three α-MnO₂ nanowire materials. The better performance of the δ-MnO₂ nanomaterials can be attributed to their higher abundance of surface unsaturated Mn atoms-particularly Mn(III)-that is originated from their specific exposed facets and higher abundance of surface defects sites. Our results underline the great potential of modulating nanomaterial surface atomic configuration to improve their performance in sustainable agricultural applications.

Fabrication of electrochemically-modified BiVO4-MoS2-Co3O4composite film for bisphenol A degradation

A new electrochemically-modified BiVO₄-MoS₂-Co₃O₄ (represented as E-BiVO₄-MoS₂-Co₃O₄) thin film electrode was successfully synthesized for environmental application. MoS₂ and Co₃O₄ were grown on the surface of BiVO₄ to obtain BiVO₄-MoS₂-Co₃O₄. E-BiVO₄-MoS₂-Co₃O₄ film was achieved by further electrochemical treatment of BiVO₄-MoS₂-Co₃O₄. The as-prepared E-BiVO₄-MoS₂-Co₃O₄ exhibited significantly enhanced photoelectrocatalytic activity. The photocurrent density of E-BiVO₄-MoS₂-Co₃O₄ thin film is 6.6 times that of BiVO₄ under visible light irradiation. The degradation efficiency of E-BiVO₄-MoS₂-Co₃O₄ for bisphenol A pollutant was 81.56% in photoelectrochemical process. The pseudo-first order reaction rate constant of E-BiVO₄-MoS₂-Co₃O₄ film is 3.22 times higher than that of BiVO₄. And its reaction rate constant in photoelectrocatalytic process is 14.5 times or 2 times that in photocatalytic or electrocatalytic process, respectively. The improved performance of E-BiVO₄-MoS₂-Co₃O₄ was attributed to the synergetic effects of the reduction of interfacial charge transfer resistance, the formation of oxygen vacancies and sub-stoichiometric metal oxides and higher separation efficiency of photogenerated electron-hole pairs. E-BiVO₄-MoS₂-Co₃O₄ is a promising composite material for pollutants removal.

Photoelectrocatalytic reactor improvement towards oil-in-water emulsion degradation

Oil-in-water (O/W) emulsion is critical wastewater that is challenging to eliminate and requires a long treatment process, and it is necessary to develop highly effective removal methods before releasing it into natural water sources. This research has selected the photoelectrocatalytic (PEC) technique to solve this problem by developing a PEC reactor for high efficiency in O/W degradation and understanding the essential factors related to the PEC reactor's efficiency improvement. The PEC reactor has been designed on a large scale with suitable positioning of an electrode that is, designing a light source near the anode electrode to enhance light irradiation efficiency and including a circulating pump to provide continuous flow to the solution through the electrode surface. We studied the main factors of supporting the electrolyte, electrode characteristics, and catalytic process. We investigated the O/W-degradation efficiency using a UV/Vis spectrophotometer, chemical oxygen demand (COD) measurement, and GC-MS analysis. We optimized the PEC reactor using the developed BiVO₄ photoanodes and placed them parallel with the zinc plates. Then, we controlled the applied potential at 1.0 V in 0.1 M Na₂SO₄ supporting an electrolyte under visible light irradiation. The developed PEC reactor can be degraded in the O/W emulsion up to 76% and decreased the COD value up to 78% for 7h. This PEC cell can be completely decomposed of many functional groups, such as carbonyl, ester, nitrile, amine, phosphate, chloro group, and nitro group, that were contained in the O/W substance. The highlight of this research is the designed light source and circulating pump inside of the PEC reactor to enhance the light irradiation, refresh the anode electrode, and understand the critical factor for the improvement of O/W-degradation efficiency. This PEC reactor presents a high-efficiency O/W degradation with practical use and a fast process suitable for further application in high turbidity of wastewater treatment from the oil industry.

The Micro-Scaled Characterization of Natural Terrestrial Ferromanganese Coatings and Their Semiconducting Properties

Different types of ferromanganese coatings were collected from the Chinese mainland to study their mineralogical characteristics and semiconducting properties. Measurements, including by optical microscope, scanning electron microscope, energy dispersive X-ray spectroscopy, micro-Raman spectrometer and transmission electron microscope, were employed to study their morphology, mineral assemblage, element abundance and distribution patterns. Soil Fe coatings are mainly composed of Al-rich hematite and clays. Soil Fe/Mn coatings can be divided into an outer belt rich in birnessite and an inner belt rich in hematite, goethite, ilmenite and magnetite. Goethite is the only component of rock Fe coatings. Rock Fe/Mn coatings mainly consist of birnessite and hematite, and alternating Fe/Mn-rich layers and Fe/Mn-poor layers can be observed. Powders were scraped off from the topmost part of ferromanganese coatings to conduct laboratory photochemical experiments. The photocurrent–time behavior indicates that natural coating electrodes exhibit an immediate increase in photocurrent intensity when exposed to light irradiation. Natural coatings can photo-catalytically degrade 14.3%–58.4% of methyl orange in 10 h. Under light irradiation, the photocurrent enhancement and organic degradation efficiency of the rock Fe/Mn coating, which has a close intergrowth structure of Fe and Mn components, is most significant. This phenomenon is attributed to the formation of semiconductor heterojunctions, which can promote the separation of electrons and holes. Terrestrial ferromanganese coatings are common in natural settings and rich in semiconducting Fe/Mn oxide minerals. Under solar light irradiation, these coatings can catalyze important photochemical processes and will thus have an impact on the surrounding environment.

A cost-effective birnessite–silicon solar cell hybrid system with enhanced performance for dye decolorization

A birnessite–silicon solar cell hybrid system with enhanced performance for dye decolorization.