Effects of ionic strength and temperature on the aggregation and deposition of multi-walled carbon nanotubes

Characterization of Calcium- and Strontium-Polyphosphate Particles Toward Drug Delivery into Articular Cartilage

Drug delivery into articular cartilage poses many challenges due in part to its lack of vasculature. While intra-articular injections are effective for the local administration of drugs, small molecules are rapidly cleared from the synovial fluid. As such, there is a need to develop effective drug delivery strategies to improve the residence times of bioactive molecules in the joint and elicit a sustained therapeutic effect. In this study, calcium- and strontium-polyphosphate particles are synthesized and characterized as potential drug carriers into articular cartilage. Physicochemical characterization reveals that the particles exhibit a spherical morphology, have a negative zeta potential, and are nanoscale in size. Biological characterization in chondrocytes confirms cellular uptake of the particles and demonstrates both size and concentration-dependent cytotoxicity at high concentrations. Furthermore, treatment of chondrocytes with these particles results in a reduction in cell proliferation and metabolic activity, confirming biological effects. Finally, incubation with cartilage tissue explants suggests successful uptake, despite the particles exhibiting a negative surface charge. Therefore, from the results of this study, these polyphosphate-based particles have potential as a drug carrier into articular cartilage and warrant further development.

Leaping Supercapacitor Performance via a Flash-Enabled Graphene Photothermal Coating

Elevating the working temperature delivers a simple and universal approach to enhance the energy storage performances of supercapacitors owing to the fundamental improvements in ion transportation kinetics. Among all heating methods, introducing green and sustainable photothermal heating on supercapacitors (SCs) is highly desired yet remains an open challenge, especially for developing an efficient and universal photothermal heating strategy that can be generally applied to arbitrary SC devices. Flash-enabled graphene (FG) absorbers are produced through a simple and facile flash reduction process, which can be coated on the surface of any SC devices to lift their working temperature via a photothermal effect, thus, improving their overall performance, including both power and energy densities. With the systematic temperature-dependent investigation and the in-depth numerical simulation of SC performances, an evident enhancement in capacitance up to 65% can be achieved in photothermally enhanced SC coin cell devices with FG photo-absorbers. This simple, practical, and universal enhancement strategy provides a novel insight into boosting SC performances without bringing complexity in electrode fabrication/optimization. Also, it sheds light on the highly efficient utilization of green and renewable photothermal energies for broad application scenarios, especially for energy storage devices.

Aggregation and stability of selenium nanoparticles: Complex roles of surface coating, electrolytes and natural organic matter

The application of selenium nanoparticles (SeNPs) as nanofertilizers may lead to the release of SeNPs into aquatic systems. However, the environmental behavior of SeNPs is rarely studied. In this study, using alginate-coated SeNPs (Alg-SeNPs) and polyvinyl alcohol-coated SeNPs (PVA-SeNPs) as models, we systematically investigated the aggregation and stability of SeNPs under various water conditions. PVA-SeNPs were highly stable in mono- and polyvalent electrolytes, probably due to the strong steric hindrance of the capping agent. Alg-SeNPs only suffered from a limited increase in size, even at 2500 mmol/L NaCl and 200 mmol/L MgCl₂, while they underwent apparent aggregation in CaCl₂ and LaCl₃ solutions. The binding of Ca²⁺ and La³⁺ with the guluronic acid part in alginate induced the formation of cross-linking aggregates. Natural organic matter enhanced the stability of Alg-SeNPs in monovalent electrolytes, while accelerated the attachment of Alg-SeNPs in polyvalent electrolytes, due to the cation bridge effects. The long-term stability of SeNPs in natural water showed that the aggregation sizes of Alg-SeNPs and PVA-SeNPs increased to several hundreds of nanometers or above 10 µm after 30 days, implying that SeNPs may be suspended in the water column or further settle down, depending on the surrounding water chemistry. The study may contribute to the deep insight into the fate and mobility of SeNPs in the aquatic environment. The varying fate of SeNPs in different natural waters also suggests that the risks of SeNPs to organisms living in diverse depths in the aquatic compartment should be concerned.

The interaction mechanisms of co-existing polybrominated diphenyl ethers and engineered nanoparticles in environmental waters: A critical review

This review focuses on the occurrence and interactions of engineered nanoparticles (ENPs) and brominated flame retardants (BFRs) such as polybrominated diphenyl ethers (PBDEs) in water systems and the generation of highly complex compounds in the environment. The release of ENPs and BFRs (e.g. PBDEs) to aquatic environments during their usage and disposal are summarised together with their key interaction mechanisms. The major interaction mechanisms including electrostatic, van der Waals, hydrophobic, molecular bridging and steric, hydrogen and π-bonding, cation bridging and ligand exchange were identified. The presence of ENPs could influence the fate and behaviour of PBDEs through the interactions as well as induced reactions under certain conditions which increases the formation of complex compounds. The interaction leads to alteration of behaviour for PBDEs and their toxic effects to ecological receptors. The intermingled compound (ENPs-BFRs) would show different behaviour from the parental ENPs or BFRs, which are currently lack of investigation. This review provided insights on the interactions of ENPs and BFRs in artificial, environmental water systems and wastewater treatment plants (WWTPs), which are important for a comprehensive risk assessment.

Effect of Tube Diameters and Functional Groups on Adsorption and Suspension Behaviors of Carbon Nanotubes in Presence of Humic Acid

The adsorption and suspension behaviors of carbon nanotubes (CNTs) in the water environment determine the geochemical cycle and ecological risk of CNTs and the compounds attached to them. In this study, CNTs were selected as the research object, and the effect of tube diameters and functional groups (multiwall CNTs (MWNTs) and hydroxylated MWNTs (HMWNTs)) on the adsorption and suspension behaviors of the CNTs in the presence of humic acid (HA) was systematically analyzed. The results indicate that HA adsorption decreased with the increase in the solution pH, and the adsorption amount and rate were negatively correlated with the tube diameter of the CNTs. The surface hydroxylation of the CNTs prevented the adsorption of HA, and the maximum adsorption amounts on the MWNTs and HMWNTs were 195.95 and 74.74 mg g-1, respectively. HA had an important effect on the suspension of the CNTs, especially for the surface hydroxylation, and the suspension of the CNTs increased with the increase in the tube diameter. The characteristics of the CNTs prior to and after adsorbing HA were characterized by transmission electron microscopy, fluorescence spectroscopy, Fourier-transform infrared spectroscopy and Raman spectroscopy. The results indicate that surface hydroxylation of the CNTs increased the adsorption of aromatic compounds, and that the CNTs with a smaller diameter and a larger specific surface area had a disordered carbon accumulation microstructure and many defects, where the adsorption of part of the HA would cover the defects on the CNTs' surface. Density functional theory (DFT) calculations demonstrated that HA was more easily adsorbed on the CNTs without surface hydroxylation. This investigation is helpful in providing a theoretical basis for the scientific management of the production and application of CNTs, and the scientific assessment of their geochemical cycle and ecological risk.

Behavior of engineered nanoparticles in aquatic environmental samples: Current status and challenges

The increasing use of engineered nanoparticles (ENPs) in consumer products has led to their increased presence in natural water systems. Here, we present a critical overview of the studies that analyzed the fate and transport behavior of ENPs using real environmental samples. We focused on cerium dioxide, titanium dioxide, silver, carbon nanotubes, and zinc oxide, the widely used ENPs in consumer products. Under field scale settings, the transformation rates of ENPs and subsequently their physicochemical properties (e.g., toxicity and bioavailability) are primarily influenced by the modes of interactions among ENPs and natural organic matter. Other typical parameters include factors related to water chemistry, hydrodynamics, and surface and electronic properties of ENPs. Overall, future nanomanufacturing processes should fully consider the health, safety, and environmental impacts without compromising the functionality of consumer products.

Characteristics of colloids and their affinity for heavy metals in road runoff with different traffic in Beijing, China

The characteristics of colloids in urban road runoff with different traffic in Beijing, China, such as concentration, particle size, chemical property, and affinity for heavy metals were determined. The concentration of colloids was high, and an evident first flush effect was found in the runoff of road with heavy traffic. A large portion of colloids were distributed in the range of 1-10 μm. Traffic activity, rainfall intensity, and time of sample collection would not change the size distribution of colloids in the road runoff. The chemical property of colloids in the road runoff would be influenced by the soil erosion nearby green space, causing the content of organic colloids was high. The correlation coefficient between the concentration of colloids in colloidal fractions and the concentration of heavy metals (Cu, Zn, Cd, Pb, Fe, and Mn) in the road runoff with different traffic decreased with the same sequence from 0.02-0.2 μm, 0.2-0.45 μm, 0.45-1 μm, to 1-10 μm, suggesting that the heavy metals had stronger affinity for the colloids with small size. The concentration of Cu, Pb, and Zn exhibited significant correlations with the concentration of organic colloids in the road runoff. More aggregated spherical particles were found in the TEM image of the road runoff with heavy traffic. Zeta potentials and RMV data showed that the colloids with smaller size and the colloids in the road runoff with lighter traffic were much more stable.

Release and sedimentation behaviors of biochar colloids in soil solutions

The release of biochar colloids considerably affects the stability of biochar in environment. Currently, information on the release behavior and suspension stability of biochar colloids in real soil solutions is scarce. In this study, 20 soils were collected from different districts in China and the release behavior of biochar colloids and their suspension stability in soil solutions were systematically examined. The results showed that both pyrolysis temperature and biomass source had important effects on the formation of biochar colloids in soil solutions. The formation amount of biochar colloids from low pyrolysis temperatures (400 °C) (average amount of 9.33-16.41 mg/g) were significantly higher than those from high pyrolysis temperatures (700 °C) (average amount of less than 2 mg/g). The formation amount of wheat straw-derived biochar colloids were higher than those of rice straw-derived biochar colloids probably due to the higher O/C ratio in wheat-straw biochar. Further, biochar colloidal formation amount was negatively correlated with comprehensive effect of dissolved organic carbon, Fe and Al in soil solutions. The sedimentation curve of biochar colloids in soil solutions is well described by an exponential model and demonstrated high suspension stability. Around 40% of the biochar colloids were maintained in the suspension at the final sedimentation equilibrium. The settling efficiency of biochar colloids was positively correlated with comprehensive effect of the ionic strength and K, Ca, Na, and Mg contents in soil solutions. Our findings help promote a deeper understanding of biochar loss and stability in the soil-water environment.

Interactions between carbon-based nanoparticles and steroid hormone micropollutants in water

The occurrence of micropollutants (MPs) including steroid hormones is a global environmental and health challenge. Carbon-based nanoparticles can be incorporated with water treatment processes to allow MP removal by adsorption. The aim was to compare the suitability of such nanoparticles (graphene, graphene oxide, carbon nanotubes and C₆₀) to adsorb steroid hormones for later incorporation in membrane composites. All nanoparticles displayed fast kinetics; carbon nanotubes and graphene showed high adsorption capacities for hormones undeterminable in isotherm studies (over 10 mg/g). External surface adsorption appears to be the most prominent factor impacting adsorption performance. Structure, conformation, geometry and surface charge of nanoparticles can influence the accessibility of surface area through colloidal instability in aqueous solution. Mechanism inspection shows that adsorption initiates at long ranges (up to 10 nm) through hydrophobic and electrostatic interactions. At relatively short ranges (0.2-0.5 nm), adsorption is enhanced by π/π stacking, XH / π (X = C, O) interactions, van der Waals forces and hydrogen bonding. Both long- and short-range forces transporting hormones from the liquid bulk into the adsorbed phase could control the rate. With relatively short residence time required and high adsorption capacity, carbon nanotubes and graphene are promising for incorporation in a membrane composite.

Analytical methods and environmental processes of nanoplastics

The degradation of plastic debris may result in the generation of nanoplastics (NPs). Their high specific surface area for the sorption of organic pollutions and toxic heavy metals and possible transfer between organisms at different nutrient levels make the study of NPs an urgent priority. However, there is very limited understanding on the occurrence, distribution, abundant, and fate of NPs in the environment, partially due to the lack of suitable techniques for the separation and identification of NPs from complex environmental matrices. In this review, we first overviewed the state-of-the-art methods for the extraction, separation, identification and quantification of NPs in the environment. Some of them have been successfully applied for the field determination of NPs, while some are borrowed from the detection of microplastics or engineered nanomaterials. Then the possible fate and transport of NPs in the environment are thoroughly described. Although great efforts have been made during the recent years, large knowledge gaps still exist, such as the relatively high detection limit of existing method failing to detect ultralow masses of NPs in the environment, and spherical polystyrene NP models failing to represent the various compositions of NPs with different irregular shapes, which needs further investigation.

Environmental Fate of Multistressors on Carpet Shell Clam Ruditapes decussatus: Carbon Nanoparticles and Temperature Variation

Ruditapes decussatus is a native clam from the Southern Europe and Mediterranean area, relevant to the development of sustainable aquaculture in these regions. As sessile organisms, bivalves are likely to be exposed to chemical contaminations and environmental changes in the aquatic compartment and are widely used as bioindicator species. Carbon-based nanomaterials (CNTs) use is increasing and, consequently, concentrations of these contaminants in aquatic systems will rise. Therefore, it is imperative to assess the potential toxic effects of such compounds and the interactions with environmental factors such as water temperature. For this, we exposed R. decussatus clams to four different water temperatures (10, 15, 20 and 25 °C) in the presence or absence of CNTs for 96 h. Different parameters related with oxidative stress status, aerobic metabolism, energy reserves and neurotoxicity were evaluated. The relationship and differences among water temperatures and contamination were highlighted by principal coordinates analysis (PCO). CNTs exposure increased oxidative damage as protein carbonylation (PC) in exposed clams at 10 °C. Higher temperatures (25 °C) were responsible for the highest redox status (ratio between reduced and oxidized glutathione, GSH/GSSG) observed as well as neurotoxic effects (acetylcholinesterase—AChE activity). Antioxidant defenses were also modulated by the combination of CNTs exposure with water temperatures, with decrease of glutathione peroxidase (GR) activity at 15 °C and of glutathione S-transferases (GSTs) activity at 20 °C, when compared with unexposed clams. Clams energy reserves were not altered, probably due to the short exposure period. Overall, the combined effects of CNTs exposure and increasing water temperatures can impair R. decussatus cellular homeostasis inducing oxidative stress and damage.

Transformation pathways and fate of engineered nanoparticles (ENPs) in distinct interactive environmental compartments: A review

The ever increasing production and use of nano-enabled commercial products release the massive amount of engineered nanoparticles (ENPs) in the environment. An increasing number of recent studies have shown the toxic effects of ENPs on different organisms, raising concerns over the nano-pollutants behavior and fate in the various environmental compartments. After the release of ENPs in the environment, ENPs interact with various components of the environment and undergoes dynamic transformation processes. This review focus on ENPs transformations in the various environmental compartments. The transformation processes of ENPs are interrelated to multiple environmental aspects. Physical, chemical and biological processes such as the homo- or hetero-agglomeration, dissolution/sedimentation, adsorption, oxidation, reduction, sulfidation, photochemically and biologically mediated reactions mainly occur in the environment consequently changes the mobility and bioavailability of ENPs. Physico-chemical characteristics of ENPs (particle size, surface area, zeta potential/surface charge, colloidal stability, and core-shell composition) and environmental conditions (pH, ionic strength, organic and inorganic colloids, temperature, etc.) are the most important parameters which regulated the ENPs environmental transformations. Meanwhile, in the environment, organisms encountered multiple transformed ENPs rather than the pristine nanomaterials due to their interactions with various environmental materials and other pollutants. Thus it is the utmost importance to study the behavior of transformed ENPs to understand their environmental fate, bioavailability, and mode of toxicity.

Assessment of DNA damage and oxidative stress in juvenile Channa punctatus (Bloch) after exposure to multi-walled carbon nanotubes

Multi-walled carbon nanotubes (MWCNTs) have many applications in industry and used as additives in polymers, catalysts, anodes in lithium-battery and drug delivery. There is little information about MWCNTs' (210 nm) genotoxic potential on juvenile freshwater fish Channa punctatus. Therefore, in this study, we have determined the toxic effects of MWCNTs on freshwater fish C. punctatus by assessing toxicological endpoints such as oxidative stress, mutagenicity, and genotoxicity after acute MWCNTs exposure for 5 days. MWCNTs LC₅₀ -96 hours value for C. punctatus was 21.8 mg/L and on this basis three different MWCNTs concentrations were selected, that is, sub-lethal I, II, and III, for 5-days exposure trials with C. punctatus. The level of lipid peroxidation increased in the gills and kidney of exposed fish at sub-lethal concentrations II and III. Contrastingly, glutathione decreased more in the gills than in the kidney. The activity of catalase enzymes decreased more in the gills than in the kidney at sublethal concentrations I and II. Glutathione S-transferase decreased in gill tissue but increased in kidney tissue following sub-lethal III exposure. Moreover, the level of glutathione reductase decreased in both tissues. In addition, MWCNTs genotoxicity was confirmed by DNA damage in lymphocytes, gills, kidney cells, and production of micronuclei (MNi) in red blood cells of freshwater fish following sub-lethal I, II, and III exposures. In conclusion, this study revealed that application of micronucleus and comet assays for in vivo laboratory studies using freshwater fish for screening the genotoxic potential of MWCNTs.

Colloidal stability and aggregation kinetics of biochar colloids: Effects of pyrolysis temperature, cation type, and humic acid concentrations

An understanding of biochar colloid aggregation and stability in aqueous environments is critical for assessing biochar fate and mobility in the soil. The aggregation kinetics of wheat straw-derived biochar colloids pyrolyzed at two temperatures 300 and 600 °C (WB300 and WB600 colloids, respectively) were investigated in monovalent and divalent electrolyte solutions in absence/presence of humic acid (HA). Results show that the critical coagulation concentrations (CCCs) of WB300 colloids in NaCl and CaCl₂ solutions were 274 and 61.4 mM, which were higher than those (183 mM for NaCl and 38.1 mM for CaCl₂) of WB600 colloids. WB300 had more oxygen-containing functional groups than WB600, which induced more negative surface charge on WB300. HA of 5 mg L^-1 greatly increased the CCCs of WB300 and WB600 colloids to 1288 and 806 mM in NaCl solutions, but decreased the CCCs to 54.6 and 37.0 mM in CaCl₂ solutions because of strong bridging between HA and Ca²⁺. In CaCl₂ solutions with high salt concentrations (near to the CCCs), different HA concentrations caused distinct effects on the aggregation of biochar colloids. The aggregation of biochar colloids was accelerated by HA with the concentration higher than 5 mg L^-1 through cation-bridging while the aggregation was inhibited in the presence of <2.5 mg L^-1 HA. Our findings show that pyrolysis temperature used for biochar production had a large effect on the aggregation of biochar colloids in the aqueous environment and that cation type and dissolved natural organic matter are controlling variables.

Concurrent aggregation and transport of graphene oxide in saturated porous media: Roles of temperature, cation type, and electrolyte concentration

Simultaneous aggregation and retention of nanoparticles can occur during their transport in porous media. In this work, the concurrent aggregation and transport of GO in saturated porous media were investigated under the conditions of different combinations of temperature, cation type (valence), and electrolyte concentration. Increasing temperature (6-24 °C) at a relatively high electrolyte concentration (i.e., 50 mM for Na⁺, 1 mM for Ca²⁺, 1.75 mM for Mg²⁺, and 0.03 and 0.05 mM for Al³⁺) resulted in enhanced GO retention in the porous media. For instance, when the temperature increased from 6 to 24 °C, GO recovery rate decreased from 31.08% to 6.53% for 0.03 mM Al³⁺ and from 27.11% to 0 for 0.05 mM Al³⁺. At the same temperature, increasing cation valence and electrolyte concentration also promoted GO retention. Although GO aggregation occurred in the electrolytes during the transport, the deposition mechanisms of GO retention in the media depended on cation type (valence). For 50 mM Na⁺, surface deposition via secondary minima was the dominant GO retention mechanism. For multivalent cation electrolytes, GO aggregation was rapid and thus other mechanisms such as physical straining and sedimentation also played important roles in controlling GO retention in the media. After passing through the columns, the GO particles in the effluents showed better stability with lower initial aggregation rates. This was probably because less stable GO particles with lower surface charge densities in the porewater were filtered by the porous media, resulting in more stable GO particle with higher surface charge densities in the effluents. An advection-dispersion-reaction model was applied to simulate GO breakthrough curves and the simulations matched all the experimental data well.