Removal of VOCs from gas streams with double perovskite-type catalysts

Accelerated oxidation of VOCs via vacuum ultraviolet photolysis coupled with wet scrubbing process

Vacuum ultraviolet (VUV) photolysis is a facile method for volatile organic compounds (VOCs) elimination, but is greatly limited by the relatively low removal efficiency and the possible secondary pollution. To overcome above drawbacks, we developed an efficient method for VOCs elimination via VUV photolysis coupled with wet scrubbing process. In this coupled process, volatile toluene, a representative of VOCs, was oxidized by the gas-phase VUV photolysis, and then scrubbed into water for further oxidation by the liquid-phase VUV photolysis. More than 96% of toluene was efficiently removed by this coupled process, which was 2 times higher than that in the gas-phase VUV photolysis. This improvement was attributed to the synergistic effect between gas-phase and liquid-phase VUV photolysis. O3 and HO• are the predomination reactive species for the toluene degradation in this coupled process, and the generation of O3 in gas-phase VUV photolysis can efficiently enhance the HO• production in liquid-phase VUV photolysis. The result from in-situ proton transfer reaction ionization with mass analyzer (PTR-MS) further suggested that most intermediates were trapped by the wet scrubbing process and efficiently oxidized by the liquid-phase VUV photolysis, showing a high performance for controlling the secondary pollution. Furthermore, the result of stability test and the reuse of solution demonstrated that this coupled process has a highly stable and sustainable performance for toluene degradation. This study presents an environmentally benign and highly efficient VUV photolysis for gaseous VOCs removal in the wet scrubbing process.

Ozone catalytic oxidation of toluene over triple perovskite-type catalysts modified with KMnO4

A unique triple perovskite-type catalyst was successfully synthesized using the simple sol-gel approach, and surface acid modification was added to improve the ozone catalytic oxidation (OZCO) process ability to remove toluene more effectively. Our study indicates that La3MnCuNiO9 catalyst treated with KMnO4 shows the best toluene oxidation activity. At 250 °C, the rates of conversion and mineralization were 100% and 83%, respectively, under thermal catalytic system when C7H8 concentration = 500 ppm. During the OZCO system ([C7H8] = 20 ppm, O3/C7H8=8; room temperature), for 6 h, the conversion rate remained at 100%. The high ratios of Mn4+/(Mn4++Mn3+), Cu2+, and abundant surface oxygen species, high specific surface area, and pore volume lead to remarkable catalytic performance of this catalyst. Meanwhile, the catalyst contributes to superior stability and water resistance. The catalytic mechanism of La3MnCuNiO9 after KMnO4 treatment in the context of OZCO was further discussed. Overall, after KMnO4 treatment, the La3MnCuNiO9 catalyst reveals extraordinary catalytic activity and excellent stability combination of this catalyst with ozone exhibits high toluene removal efficiency in the OZCO system and has a good potential for industrial applications.

Role of La-based perovskite catalysts in environmental pollution remediation

Since the advent of the industrial revolution, there has been a constant need of efficient catalysts for abatement of industrial toxic pollutants. This phenomenon necessitated the development of eco-friendly, stable, and economically feasible catalytic materials like lanthanum-based perovskite-type oxides (PTOs) having well-defined crystal structure, excellent thermal, and structural stability, exceptional ionic conductivity, redox behavior, and high tunability. In this review, applicability of La-based PTOs in remediation of pollutants, including CO, NO x and VOCs was addressed. A framework for rationalizing reaction mechanism, substitution effect, preparation methods, support, and catalyst shape has been discussed. Furthermore, reactant conversion efficiencies of best PTOs have been compared with noble-metal catalysts for each application. The catalytic properties of the perovskites including electronic and structural properties have been extensively presented. We highlight that a robust understanding of electronic structure of PTOs will help develop perovskite catalysts for other environmental applications involving oxidation or redox reactions.

Component regulation in novel La-Co-O-C composite catalyst for boosted redox reactions and enhanced thermal stability in methane combustion

A novel La-Co-O-C (LC-C) composites were prepared via a facile co-hydrothermal route with oxides and glycerol and further optimized for methane catalytic activity and thermal stability via component regulation. It was demonstrated that Co₃O₄ phase was the main component in regulation. The combined results of X-ray photoelectron spectroscopy (XPS), temperature-programmed desorption of oxygen (O₂-TPD), temperature-programmed reduction of hydrogen (H₂-TPR), temperature-programmed desorption of ammonia/carbon dioxide (NH₃/CO₂-TPD) revealed that component regulation led to more oxygen vacancies and exposure of surface Co²⁺, lower surface basicity and optimized acidity, which were beneficial for adsorption of active oxygen species and activation of methane molecules, resulting in the excellent catalytic oxidation performance. Especially, the (3.5)LC-C (3.5 is Co-to-La molar ratio) showed the optimum activity and the T₅₀ and T₉₀ (the temperature at which the CH₄ conversion rate was 50% and 90%, respectively) were 318 and 367°C, respectively. Using theoretical calculations and in situ diffuse reflection infrared Fourier transform spectroscopy characterization, it was also found that the catalytic mechanism changes from the "Rideal-Eley" mechanism to the "Two-term" mechanism depending on the temperature windows in which the reaction takes place. Besides, the use of the "Flynn-Wall-Ozawa" model in thermoanalytical kinetics revealed that component regulation simultaneously optimized the decomposition activation energy, further expanding the application scope of carbon-containing composites.

Effect of A, B-site cation on the catalytic activity of La1-xAxMn1-yByO3 (A = Ce, B = Ni) perovskite-type oxides for toluene oxidation

ABO3-type perovskites (A = La, Ce; B = Mn, Ni) were prepared by sol-gel method, and applied for catalytic oxidation of toluene. The activity test results show that the activity of LaMnO3 can be improved when a small amount of Ce and Ni are doped into the A and B sites of LaMnO3, respectively. The effects of different calcination temperatures and different calcination time on the preparation of La-based perovskites were also investigated. The results illustrate that the toluene conversion of La0.8Ce0.2Mn0.8Ni0.2O3 is the highest when the calcination temperature is 700 °C and the calcination time is 4 h in La1-xCexMn1-yNiyO3 perovskites, and it requires lower reaction temperature when the conversion rate of toluene reaches 100% as compared to other catalysts, the T90 is 295 °C (T90, the temperature corresponding to the 90% of toluene conversion). Importantly, the mechanism of catalytic oxidation was also discussed. Therefore, the catalyst has potential prospects in the volatile organic compounds (VOCs) degradation.

Review of Emission Characteristics and Purification Methods of Volatile Organic Compounds (VOCs) in Cooking Oil Fume

Volatile organic compounds (VOCs) in cooking oil fumes need to be efficiently removed due to the significant damage they cause to the environment and human health. This review discusses the emission characteristics, which are influenced by different cooking temperatures, cooking oils, and cuisines. Then, various cooking oil fume purification methods are mainly classified into physical capture, chemical decomposition, and combination methods. VOCs removal rate, system operability, secondary pollution, application area, and cost are compared. The catalytic combustion method was found to have the advantages of high VOC removal efficiency, environmental protection, and low cost. Therefore, the last part of this review focuses on the research progress of the catalytic combustion method and summarizes its mechanisms and catalysts. The Marse-van Krevelen (MVK), Langmuir-Hinshelwood (L-H), and Eley-Rideal (E-R) mechanisms are analyzed. Noble metal and non-noble metal catalysts are commonly used. The former showed excellent activity at low temperatures due to its strong adsorption and electron transfer abilities, but the high price limits its application. The transition metals primarily comprise the latter, including single metal and composite metal catalysts. Compared to single metal catalysts, the interaction between metals in composite metal catalysts can further enhance the catalytic performance.

Preparation and Performance of Carbon-Based Ce-Mn Catalysts for Efficient Degradation of Acetone at Low Temperatures

Based on the porous carbon material from citric acid residue, catalysts of different Ce-Mn ratios were prepared with incipient-wetness impregnation (IWI) to delve into their acetone-degrading performance and relevant mechanisms. When the Ce-Mn molar ratio is 0.8, the prepared catalyst Ce_0.8-Mn/AC shows abundant and uniformly dispersed Mn and Ce particles on the surface. The content of Mn and Ce on the Ce_0.8-Mn/AC surface reaches 5.64% and 0.75%, respectively. At the acetone concentration of 238 mg/m³ (100 ppm), the laws of acetone degradation in different catalysts at different catalyzing temperatures and with various oxygen concentrations were studied, and we found that the rate of acetone degradation by Ce_0.8-Mn/AC can exceed 90% at 250 °C. Cerium oxide and manganese oxide are synergistic in the catalytic degradation of acetone. Adding cerium to manganese-based catalysts can increase the oxygen migration rate in the catalysts and thus raise the reduction rate of lattice oxygen in manganese oxide. The results offer new ideas and approaches for the efficient and comprehensive utilization of bio-fermentation by-products, and for the development of cheap and high degradation performance catalysts for acetone.

Influence of the Thermal Processing and Doping on LaMnO3 and La0.8A0.2MnO3 (A = Ca, Sr, Ba) Perovskites Prepared by Auto-Combustion for Removal of VOCs

Single-phase oxygen stoichiometric LaMnO3 and doped La0.8A0.2MnO3 (A = Ca, Sr, Ba) perovskites have been prepared by a simple one-step auto-combustion method. Cation-deficient LaMnO3+δ and La0.8A0.2MnO3+δ were obtained by calcination of the former samples in air at 750 °C. The samples were characterized by X-ray powder diffraction, X-ray photoelectron spectroscopy, temperature-programmed reduction, temperature-programmed oxygen desorption, and N2 physisorption in order to apply them as catalysts in the complete catalytic oxidation of acetone as a model volatile organic compound. The studied phases show the expected orthorhombic and rhombohedral perovskite crystal structures. Catalytic experiments performed with all the samples show measurable activity already at 100 °C. At 200 °C, doped La0.8A0.2MnO3 samples show higher activity than undoped LaMnO3, with increasing conversion with larger A-cation size. Calcined samples also show higher activity than as-prepared ones making La0.8Ba0.2MnO3+δ the best catalyst at this temperature. All doped samples show >95% acetone conversion at T ≥ 250 °C with a weak dependence on the sample processing or A cation doping. The collected evidence confirms that the most important factors for the catalytic activity of these oxides are the Mn4+/Mn3+ molar ratio on the surface of the samples and the cation-deficiency of the bulk perovskite structure. In addition, increasing the symmetry of the bulk crystal structure appears to have an additional favourable effect. Despite the observation of the presence of surface carbonates, we show that it is possible to use the as-prepared samples without further thermal treatment with good results in the oxidation of acetone.

N-doped CoAl oxides from hydrotalcites with enhanced oxygen vacancies for excellent low-temperature propane oxidation

A series of nitrogen-doped CoAlO (N-CoAlO) were constructed by a hydrothermal route combined with a controllable NH₃ treatment strategy. The effects of NH₃ treatment on the physico-chemical properties and oxidation activities of N-CoAlO catalysts were investigated. In comparison to CoAlO, a smallest content decrease in surface Co³⁺ (serving as active sites) while a largest increased amount of surface Co²⁺ (contributing to oxygen species) are obtained over N-CoAlO/4h among the N-CoAlO catalysts. Meanwhile, a maximum N doping is found over N-CoAlO/4h. As a result, N-CoAlO/4h (under NH₃ treatment at 400°C for 4 hr) with rich oxygen vacancies shows optimal catalytic activity, with a T₉₀ (the temperature required to reach a 90% conversion of propane) at 266°C. The more oxygen vacancies are caused by the co-operative effects of N doping and suitable reduction of Co³⁺ for N-CoAlO/4h, leading to an enhanced oxygen mobility, which in turn promotes C₃H₈ total oxidation activity dominated by Langmuir-Hinshelwood mechanism. Moreover, in situ diffuse reflectance infrared Fourier transform spectroscopy (DRIFTs) analysis shows that N doping facilities the decomposition of intermediate species (propylene and formate) into CO₂ over the catalyst surface of N-CoAlO/4h more easily. Our reported design in this work will provide a promising way to develop abundant oxygen vacancies of Co-based catalysts derived from hydrotalcites by a simple NH₃ treatment.

Research progress of catalytic oxidation of volatile organic compounds over Mn-based catalysts – a review

With the rapid development of urbanization and industrialization, environmental pollution has become more severe. Volatile organic compounds (VOCs) could be originated from the following sources: domestic, mobile and industrial sources. As important air pollutants, VOCs could cause serious harm to the environment and human health. Therefore, removing VOCs has become a priority research direction of ecological issues. Among the many elimination methods, catalytic oxidation approaches are among the most effective and economical methods which can transform VOCs into CO2 and H2O. MnOx catalysts are among the most active catalysts, which can be further modified by different cations such as Cu2+, Co2+, Cr3+, Ni2+ and Ce4+ to form mixed oxides to improve the catalytic oxidation of VOCs activity. Moreover, MnOx can be loaded on the carrier, improving the redox and oxygen storage capacity and improving its stability and activity. This review explores the structure, preparation and oxidation state of Mn-based catalysts.

Boosting the surface oxygen activity for high performance Iron-based perovskite oxide

Surface oxygen activities always play an important role in various heterogeneous reaction processes. In this study, the surface oxygen activity of studied perovskite oxides is greatly enhanced after the composition and morphology are tuned. It is worth noting that the surface oxygen activity is enhanced correspondingly, accompanied by higher surface area, better reducibility, and superior low-temperature reactivity of studied catalysts. The sample introduced with nickel atom and nanorods structure possesses higher surface oxygen activity and vacancies with superior performance including T₁₀ at 221 °C and T₉₀ at 243 °C, nearly 90 °C elevations. Double perovskite oxides, especially with nanorods structure are verified to be composed of more surface active oxygen, which could be related to low-temperature redox ability and superior oxygen vacancies. Based on the DFT calculation, introducing nickel element is confirmed to be able to efficiently boost the generation of oxygen vacancies and adsorption of oxygen molecular, in accord with the analysis of characterization. To sum up, the strategy of introducing the nickel atom and nanorods structure could effectively tune the surface oxygen activity and generate more oxygen vacancies, which would be beneficial to the catalytic performance of toluene catalytic oxidation correspondingly.

Boosting Catalytic Purification of Soot Particles over Double Perovskite-Type La2-xKxNiCoO6 Catalysts with an Ordered Macroporous Structure

The catalytic performances for soot purification over the perovskite-type ABO3 oxides, as one of the most potential non-noble metal catalysts, are closely correlated with the substitution of A-site and B-site ions. Herein, three-dimensional ordered macroporous (3DOM) structural catalysts of double perovskite-type La2-xKxNiCoO6 were prepared by a method of colloidal crystal template. The contact efficiency between the catalyst and soot particles is significantly promoted by the 3DOM structure, and the partial substitution of A-site (La) with low-valence potassium (K) ions in La2-xKxNiCoO6 catalysts boosts the increasing surface density of coordinatively unsaturated active B-sites (Co and Ni) and active oxygen. 3DOM La2-xKxNiCoO6 catalysts exhibited superior performance during the purification of soot particles, and the 3DOM La1.80K0.20NiCoO6 catalyst exhibited the highest activity, that is, the values of T50, SCO2, and turnover frequency are 346 °C, 99.3%, and 0.204 h-1 (at 300 °C), respectively. According to the results of multiple experimental characterizations and density functional theory calculations, the mechanism of the samples during soot removal is proposed: the increase in surface oxygen density induced by the doping of K ions significantly promotes the critical step of the oxidation from NO to NO2 in catalyzing soot purification. It is one new strategy to develop the high-efficient non-noble metal catalysts for soot purification in practical application.

SrFe1−xSnxO3−δ nanoparticles with enhanced redox properties for catalytic combustion of benzene

A series of SrFe_1−xSn_xO_3−δ showed high catalytic activity for benzene combustion. The partial substitution of Fe with Sn increased specific surface area and accelerated redox rates of Fe, resulting in the improvement of the catalytic activity.

Direct Z-scheme La1-xCexMnO3 catalyst for photothermal degradation of toluene

A series of Ce-doped LaMnO₃ (La_1-xCe_xMnO₃) were prepared and were tested for gaseous toluene oxidation in order to investigate the effect of cerium doping in LaMnO₃ on activity under photothermal conditions. It was found that the activity and CO₂ yield of the catalyst can be effectively increased when x = 0.25. A group of characterization is used to characterize the morphology, composition, and physical properties of the as-prepared catalysts. Results show that the Ce-doped LaMnO₃ can form coexistence of La_1-xCe_xMnO₃ and CeO₂, the reaction of CeO₂/La_1-xCe_xMnO₃ under photothermal conditions follows the Mars-van Krevelen redox cycle mechanism, and the prepared CeO₂/La_1-xCe_xMnO₃ can form a highly efficient Z-scheme heterojunction, which can enhance the electrons transfer speed of the catalyst. Moreover, in the photothermal catalytic degradation, lattice oxygen is the most important active substance, a small amount of cerium doping can increase the lattice oxygen content of perovskite and increase the activity of the reaction.

Alternative pathways to α,β-unsaturated ketones via direct oxidative coupling transformation using Sr-doped LaCoO3 perovskite catalyst

A strontium-doped lanthanum cobaltite perovskite material was prepared, and used as a recyclable and effective heterogeneous catalyst for the direct oxidative coupling of alkenes with aromatic aldehydes to produce α,β-unsaturated ketones. The reaction afforded high yields in the presence of di-tert-butylperoxide as oxidant. Single oxides or salts of strontium, lanthanum and cobalt, and the undoped perovskite offered a lower catalytic activity than the strontium-doped perovskite. Benzaldehyde could be replaced by benzyl alcohol, dibenzyl ether, 2-oxo-2-phenylacetaldehyde, 2-bromoacetophenone or (dimethoxymethyl) benzene in the oxidative coupling reaction with alkenes. To our best knowledge, reactions between these starting materials with alkenes are new and unknown in the literature.

Plasma catalytic oxidation of toluene over double perovskite-type oxide via packed-bed DBD

Various perovskite-type catalysts including La₂CoMnO₆, LaCoO₃, and LaMnO₃ are first evaluated for the activities toward C₇H₈ removal. Experimental results indicate that double-type La₂CoMnO₆ shows better activity if compared with single perovskites due to high lattice oxygen content and good reducibility. Subsequently, perovskite catalysts are combined with plasma (NTP) to form in-plasma catalysis (IPC) and post-plasma catalysis (PPC) systems. The results indicate that IPC systems have better higher performance than that of NTP-alone and PPC. Especially, high C₇H₈ conversion (100%) and mineralization efficiency (96.8%) can be achieved with the applied voltage of 18 kV and temperature of 120 °C when La₂CoMnO₆ is integrated with NTP to form IPC system. Also, it owns the highest energy efficiency (0.14 g/kWh). It is concluded that IPC performance for C₇H₈ removal is closely related with the properties of catalyst surface. In addition, the kinetics of IPC systems are investigated by a simplified model, and the result indicates that IPC with La₂CoMnO₆ as catalyst has a higher overall energy constant. This study reveals that double-type La₂CoMnO₆ is of higher activity than single perovskites for C₇H₈ removal, and demonstrates that double-type La₂CoMnO₆ is of high potential to form plasma catalysis system for VOCs removal.

Rare earth double perovskites: a fertile soil in the field of perovskite oxides

This review summarizes the compositions, syntheses, and applications of rare earth A₂B′B′′O₆ double perovskites.