Fabrication of electrochemically-modified BiVO4-MoS2-Co3O4composite film for bisphenol A degradation

Enhancing the efficient degradation of BPS using the BPNS-CdS composite catalyst under visible light

Black phosphorus nanosheets (BPNS), a novel two-dimensional nanomaterial, find extensive applications in the field of photocatalysis. With the prohibition of bisphenol A (BPA), the utilization of bisphenol S (BPS), which is more resistant to degradation than BPA, has been steadily increasing. In this study, few-layer BPNS was prepared using an improved liquid-phase exfoliation method, showcasing its commendable specific surface area and notable adsorption capacity. Subsequently, a new type of nanocomposite material, BPNS-Cadmium sulfide (CdS), was hydrothermal synthesized involving BPNS and CdS. We conducted comparative assessments of BPNS, CdS, and their composite materials to identify the most efficient catalysts. Ultimately, we found that the composite material BPNS-CdS exhibited the highest capability for degrading BPS in an alkaline environment, achieving an impressive degradation rate of 86.9%. Notably, the degradation rate remained higher in an acidic environment compared to a neutral one. Through Electron Spin Resoance (ESR) experiments, it is revealed that BPNS-CdS, when exposed to visible light, generates •O2-, •OH, and h+ as confirmed. Additionally, we tested and validated the carrier separation and migration abilities of BPNS-CdS while also calculating the band gap for each material. Building upon these results, a possible photocatalysis mechanism experiment was proposed. Finally, the degradation products were analyzed using High-Performance Liquid Chromatography-Mass Spectrometry (HPLC-MS) and put forth a plausible pathway for the BPS degradation, and it was found that 4-Phenolsulfonic acid, Ethyl protocatechuate and Isophthalic acid are the main intermediates of BPS. This study contributes to a deeper understanding of the synergy between non-metallic catalysts like BPNS and metal catalysts like CdS. It also offers new insights into the degradation mechanisms and pathways for BPS.

Fabrication of CuFe2O4/Bi12O17Cl2 photocatalyst with intrinsic p-n junction for highly efficient bisphenol A degradation

The construction and application of novel highly efficient photocatalysts have been the focus in the field of environmental pollutant removal. In this work, a novel CuFe2O4/Bi12O17Cl2 photocatalysts were synthesized by simple hydrothermal and chemical precipitation method. The fabricated CuFe2O4/Bi12O17Cl2 composite exhibited much higher photocatalytic activity than pristine CuFe2O4 and Bi12O17Cl2 in the removal of bisphenol A (BPA) under visible-light illumination, which ascribed to the intrinsic p-n junction of CuFe2O4 and Bi12O17Cl2. The photocatalytic degradation rate of BPA on CuFe2O4/Bi12O17Cl2 with an optimized CuFe2O4 content (1.0 wt.%) reached 93.0% within 30 min. The capture experiments of active species confirmed that the hydroxyl radicals (•OH) and superoxide radicals (•O2-) played crucial roles in photocatalytic BPA degradation process. Furthermore, the possible degradation mechanism and pathways of BPA was proposed according to the detected intermediates in photocatalytic reaction process.

Construction of dual Z-scheme Bi2WO6/g-C3N4/black phosphorus quantum dots composites for effective bisphenol A degradation

In this work, a novel dual Z-scheme Bi₂WO₆/g-C₃N₄/black phosphorus quantum dots (Bi₂WO₆/g-C₃N₄/BPQDs) composites were fabricated and utilized towards photocatalytic degradation of bisphenol A (BPA) under visible-light irradiation. Optimizing the content of g-C₃N₄ and BPQDs in Bi₂WO₆/g-C₃N₄/BPQDs composites to a suitable mass ratio can enhance the visible-light harvesting capacity and increase the charge separation efficiency and the transfer rate of excited-state electrons and holes, resulting in much higher photocatalytic activity for BPA degradation (95.6%, at 20 mg/L in 120 min) than that of Bi₂WO₆ (63.7%), g-C₃N₄ (25.0%), BPQDs (8.5%), and Bi₂WO₆/g-C₃N₄ (79.6%), respectively. Radical trapping experiments indicated that photogenerated holes (h⁺) and superoxide radicals (•O₂^-) played crucial roles in photocatalytic BPA degradation. Further, the possible degradation pathway and photocatalytic mechanism was proposed by analyzing the BPA intermediates. This work also demonstrated that the Bi₂WO₆/g-C₃N₄/BPQDs as effective photocatalysts was stable and have promising potential to remove environmental contaminants from real water samples.

In Situ Synthesis of a Bismuth Vanadate/Molybdenum Disulfide Composite: An Electrochemical Tool for 3-Nitro-l-Tyrosine Analysis

The quantification of 3-nitro-l-tyrosine (NO₂-Tyr), an in vivo biomarker of nitrosative stress, is indispensable for the clinical intervention of various inflammatory disorders caused by nitrosative stress. By integrating the unique features of BiVO₄ and MoS₂ with matching bandgap energies, electrode materials with amplified response signals can be developed. In this regard, we introduce a hydrothermally synthesized bismuth vanadate sheathed molybdenum disulfide (MoS₂@BiVO₄) heterojunction as a highly sensitive electrode material for the determination of NO₂-Tyr. Excellent electrochemical behavior perceived for the MoS₂@BiVO₄ augments the performance of the sensor and allows the measurement of NO₂-Tyr in biological media without any time-consuming pretreatments. The synergistic interactions between BiVO₄ and MoS₂ heterojunctions contribute to low resistance charge transfer (R_ct = 159.13 Ω·cm²), a reduction potential E_pc = -0.58 V (vs Ag/AgCl), and a good response range (0.001-526.3 μM) with a lower limit of detection (0.94 nM) toward the detection of NO₂-Tyr. An improved active surface area, reduced charge recombination, and high analyte adsorption contribute to the high loading of the biomarker for improved selectivity (in the presence of 10 interfering compounds), operational stability (1000 s), and reproducibility (six various modified electrodes). The proposed sensor was successfully utilized for the real-time determination of NO₂-Tyr in water, urine, and saliva samples with good recovery values (±98.94-99.98%), ascertaining the reliability of the method. It is noteworthy that the electrochemical activity remains unaffected by other redox interferons, thus leading to targeted sensing applications.

Ultrasensitive electrochemical detection of furazolidone in biological samples using 1D-2D BiVO4@MoS2 hierarchical nano-heterojunction composites armed electrodes

In this work, the hydrothermally synthesized of BiVO₄@MoS₂ hierarchical nano-heterojunction composite is employed as a novel electrocatalyst for electrochemical sensing of Furazolidone (FZE) drug by modifying the glassy carbon electrodes (GCE). The Raman spectroscopy, X-ray diffraction, X-ray photoelectron spectroscopy and transmission electron microscopy are used to thoroughly investigate the functional groups, vibrational modes, crystal structure, elemental composition and surface topography of the heterojunction composite. The physical characterization results revealed the successful construction of 1D-2D BiVO₄@MoS₂ hierarchical nano-heterojunction composite. When these unique architectures are reinforced on GCE surface, we achieved an enhanced electroactive surface area of 0.154 cm². The electrochemical performance of 1D-2D BiVO₄@MoS₂ is examined though cyclic voltammetry and differential pulse voltammetry (DPV) analysis. The BiVO₄@MoS₂ composites exhibited an excellent electrocatalytic activity in sensing of FZE with superior linear detection ranges of 0.01-14 and 14-614 μM. The limit of detection (LOD) of the BiVO₄@MoS₂ based sensor is determined to be 2.9 nM which is far superior than other reported FZE sensors. Consequently, it is evident from the investigation that the BiVO₄@MoS₂ based FZE sensor can be recommended for analyzing real time samples like human urine and blood serum with appreciable recovery.

Porous Oxygen-Doped g-C3N4 with the Different Precursors for Excellent Photocatalytic Activities under Visible Light

Antibiotic contamination has received widespread attention globally. In this work, the oxygen-doped porous graphite carbonitride (g-C₃N₄) was prepared with urea and ammonium oxalate (CNUC) or urea and glycine (CNUG) as precursors by thermal polymerization. Using bisphenol A (BPA) as a probe and CNUC or CNUG as photocatalysts, the removal performance test was carried out. Meanwhile, all prepared photocatalysts were characterized by XRD, FT-IR, SEM, TEM, XPS, UV-Vis DRS, PL and EIS. Under visible light irradiation, both CNUC and CNUG exhibited about seven and five times greater photocatalytic activity than that of pure g-C₃N₄, respectively. The radical capture experiments verified that superoxide radicals (•O₂⁻) and holes (h⁺) were the main active species in the photocatalytic degradation of BPA by CNUC, and the possible photocatalytic mechanism of CNUC was proposed. In addition, all these results indicate that CNUC catalyst can effectually inhibit the photocorrosion and keep superior stability. The proposed technique provides a prospective approach to develop nonmetal-modified photocatalysts for future applications.