Rapid sensitive fluorescence detection of cadmium (II) with pyrene excimer switching aptasensor

A portable solid sampling visualization nano-sensor for soil Cd based on "three-phase transforming" technique

Direct analysis of solid samples is always challenging for ionic sensors due to solidified elemental presence and matrix interference. In this work, a "three-phase transforming" technique was first established to make solid sampling elemental sensors and visual detection possible in the future. For Cd transforming from soil samples, a metal ceramic heater (MCH) electrothermal vaporizer (ETV) coupled with a dielectric barrier discharge quartz trap (DBD-QT) was first utilized to fulfill the solid sampling and preconcentration of Cd in soil; for on-site analysis, a colorimetric sensor based on the trithiocyanuric acid (TMT) functionalized gold nanoparticles (AuNPs) was chosen as a chromogenic analysis model. The portable and miniature ETV-DBD apparatus directly introduced Cd from soil and then captured Cd, consuming only <130 W and 4.5 kg weight; finally, only 200 μL water was injected as eluent to dissolve Cd for the following colorimetric detection. Herein, the Cd analyte underwent a "three-phase transforming" from solid (Cd compounds in soil), to aerosol (vaporization and transportation), to solid (Cd oxides trapped on quartz surface) and to liquid (Cd2+ in eluate). Under optimized conditions, the method limit of detection (LOD) reached 0.04 mg/kg Cd (50 mg sample), fulfilling fast monitoring of Cd contamination in soil, with <20 % relative standard deviations (RSDs). The analysis time was <10 min excluding sample digestion and acid application, as well as the interference of Pb2+ on the AuNPs sensor can be eliminated via the "three-phase transforming" process, proving an excellent anti-interference for solid analysis. This "three-phase transforming" processing technique coupled with colorimetric sensor holds a great potential for direct and on-site analysis in solid samples without complicated handling, providing a fantastic methodology for the application of ionic sensors and making solid sampling elemental sensor and visual detection possible.

Sensitive electrochemical sensor for Cd2+ with engineered short high-affinity aptamer undergoing large conformation change

Cadmium ion (Cd2+) is a highly toxic heavy metal ion that threatens the environment and human health. To achieve rapid and sensitive detection of Cd2+, here we developed a reagent-less aptamer electrochemical sensor by immobilizing an engineered high-affinity DNA aptamer with a redox tag of methylene blue (MB) on the gold electrode. After testing a series of engineered aptamer sequences, we employed an optimal and new 15-mer aptamer with a short 3-bp stem for sensor fabrication, which underwent large conformation change upon Cd2+ binding. This aptamer retained high affinity with a Kd about 360 nM, verified by isothermal titration calorimetry (ITC) analysis. In the presence of Cd2+, this aptamer folded into a stem-loop structure, drawing the MB into a close proximity to the electrode surface and generating enhanced current in square wave voltammetry (SWV). Under the optimized conditions, this aptamer sensor enabled us to sensitively detect Cd2+ in a wide concentration range from 0.5 nM to 4 μM, and the detection limit was 90 pM. The developed electrochemical aptasensor has the advantages in easy preparation, rapid response, high stability, high selectivity and easy regeneration and reuse, showing the potential for Cd2+ detection in broad applications.

CRISPR/Cas12a-Amplified Aptamer Switch Microplate Assay for Small Molecules

The presence of small molecule contaminants such as mycotoxins and heavy metals in foods and the environment causes a serious threat to human health and huge economic losses. The development of simple, rapid, sensitive, and on-site methods for small molecule pollutant detection is highly demanded. Here, combining the advantages of structure-switchable aptamer-mediated signal conversion and CRISPR/Cas12a-based signal amplification, we developed a CRISPR/Cas12a-amplified aptamer switch assay on a microplate for sensitive small molecule detection. In this assay, a short DNA strand complementary to the aptamer (cDNA) is immobilized on a microplate, which can capture the aptamer-linked active DNA probe (Apt-acDNA) in the sample solution when the target is absent. With the addition of the Cas12a reporter system, the captured Apt-acDNA probes activate Cas12a to indiscriminately cleave fluorescent DNA substrates, producing a high fluorescence signal. When the target is present, the Apt-acDNA probe specifically binds to the target rather than hybridizing with cDNA on the microplate, and the fluorescence signal is reduced. The analytical performance of our method was demonstrated by the detection of two highly toxic pollutants, aflatoxin B1 (AFB1) and cadmium ion (Cd2+), as examples. The assay exhibited good selectivity and high sensitivity, with detection limits of 31 pM AFB1 and 3.9 nM Cd2+. It also allowed the detection of targets in the actual sample matrix. With the general signal conversion strategy, this method can be used to detect other targets by simply changing the aptamer and cDNA, showing potential practical applications in broad fields.

Phenothiazine-Based Cu(II)-Selective Fluorescent Sensor: GHK-Cu Sensing Applications

Sensing important metals in different environments is an important area and involves the development of a wide variety of metal-sensing materials. The employment of fluorescent sensors in metal sensing has been one of the most widely applied methodologies, and the identification of selective metal sensors is important. We herein report a phenothiazine-based Cu(II) fluorescent sensor that is highly selective to Cu(II) ions compared with other transition metal salts. The Lewis acidity of the Cu(II) salt certainly was found to be a factor for obtaining an enhanced sensing response in MeOH as the solvent, while a ratio of 1:1 was calculated to be the most optimum for getting the desired response.

A Sensitive Aptamer Fluorescence Anisotropy Sensor for Cd2+ Using Affinity-Enhanced Aptamers with Phosphorothioate Modification

Rapid and sensitive detection of heavy metal cadmium ions (Cd2+) is of great significance to food safety and environmental monitoring, as Cd2+ contamination and exposure cause serious health risk. In this study we demonstrated an aptamer-based fluorescence anisotropy (FA) sensor for Cd2+ with a single tetramethylrhodamine (TMR)-labeled 15-mer Cd2+ binding aptamer (CBA15), integrating the strengths of aptamers as affinity recognition elements for preparation, stability, and modification, and the advantages of FA for signaling in terms of sensitivity, simplicity, reproducibility, and high throughput. In this sensor, the Cd2+-binding-induced aptamer structure change provoked significant alteration of FA responses. To acquire better sensing performance, we further introduced single phosphorothioate (PS) modification of CBA15 at a specific phosphate backbone position, to enhance aptamer affinity by possible strong interaction between sulfur and Cd2+. The aptamer with PS modification at the third guanine (G) nucleotide (CBA15-G3S) had four times higher affinity than CBA15. Using as an aptamer probe CBA15-G3S with a TMR label at the 12th T, we achieved sensitive selective FA detection of Cd2+, with a detection limit of 6.1 nM Cd2+. This aptamer-based FA sensor works in a direct format for detection without need for labeling Cd2+, overcoming the limitations of traditional competitive immuno-FA assay using antibodies and fluorescently labeled Cd2+. This FA method enabled the detection of Cd2+ in real water samples, showing broad application potential.