Natural siderite derivatives activated peroxydisulfate toward oxidation of organic contaminant: A green soil remediation strategy

Towards advanced removal of organics in persulfate solution by heterogeneous iron-based catalyst: A review

Heterogeneous iron-based catalysts have drawn increasing attention in the advanced oxidation of persulfates due to their abundance in nature, the lack of secondary pollution to the environment, and their low cost over the last a few years. In this paper, the latest progress in the research on the activation of persulfate by heterogeneous iron-based catalysts is reviewed from two aspects, in terms of synthesized catalysts (Fe0, Fe2O3, Fe3O4, FeOOH) and natural iron ore catalysts (pyrite, magnetite, hematite, siderite, goethite, ferrohydrite, ilmenite and lepidocrocite) focusing on efforts made to improve the performance of catalysts. The advantages and disadvantages of the synthesized catalysts and natural iron ore were summarized. Particular interests were paid to the activation mechanisms in the catalyst/PS/pollutant system for removal of organic pollutants. Future research challenges in the context of field application were also discussed.

Recent Advances in Porous Bio-Polymer Composites for the Remediation of Organic Pollutants

The increasing awareness of the importance of a clean and sustainable environment, coupled with the rapid growth of both population and technology, has instilled in people a strong inclination to address the issue of wastewater treatment. This global concern has prompted individuals to prioritize the proper management and purification of wastewater. Organic pollutants are very persistent and due to their destructive effects, it is necessary to remove them from wastewater. In the last decade, porous organic polymers (POPs) have garnered interest among researchers due to their effectiveness in removing various types of pollutants. Porous biopolymers seem to be suitable candidates among POPs. Sustainable consumption and environmental protection, as well as reducing the consumption of toxic chemicals, are the advantages of using biopolymers in the preparation of effective composites to remove pollutants. Composites containing porous biopolymers, like other POPs, can remove various pollutants through absorption, membrane filtration, or oxidative and photocatalytic effects. Although composites based on porous biopolymers shown relatively good performance in removing pollutants, their insufficient strength limits their performance. On the other hand, in comparison with other POPs, including covalent organic frameworks, they have weaker performance. Therefore, porous organic biopolymers are generally used in composites with other compounds. Therefore, it seems necessary to research the performance of these composites and investigate the reasons for using composite components. This review exhaustively investigates the recent progress in the use of composites containing porous biopolymers in the removal of organic pollutants in the form of adsorbents, membranes, catalysts, etc. Information regarding the mechanism, composite functionality, and the reasons for using each component in the construction of composites are discussed. The following provides a vision of future opportunities for the preparation of porous composites from biopolymers.

Siderite's green revolution: From tailings to an eco-friendly material for the green economy

Siderite, extensively mined as a natural iron mineral, is often discarded as tailings due to the low grade of the ore and due to the high cost of current sorting technologies. Yet, this mineral has demonstrated significant potential in several pivotal areas of the environmental remediation. Siderite not only possesses exceptional adsorption, catalytic, and microbial carrier capabilities but also offers an eco-friendly and cost-effective solution for the environmental pollution management. This article consolidates research advancements and achievements over the past few decades concerning siderite's role in pollution control, delving deeply into its various remediation pathways. Initially, the paper contrasts the performance differences between natural and synthetic siderite, followed by a comprehensive overview of siderite's adsorption mechanisms for various inorganic pollutants. Furthermore, this paper analyzes the unique physicochemical attributes of siderite as both, a reductant and the catalyst, with a special emphasis on its use in the preparation of SCR catalysts and in the catalytic advanced oxidation processes for organic pollutants' degradation. This paper also enumerates and discusses the myriad advantages of siderite as a microbial carrier, thereby enhancing our understanding of biogeochemical cycles and pollutant transformations. In essence, this review systematically elucidates the mechanisms and intrinsic physicochemical properties of siderite in pollution control, paving the way for novel strategies to augment siderite's environmental remediation performance.

Harnessing the power of natural minerals: A comprehensive review of their application as heterogeneous catalysts in advanced oxidation processes for organic pollutant degradation

The release of untreated wastewater into water bodies has become a significant environmental concern, resulting in the accumulation of refractory organic pollutants that pose risks to human health and ecosystems. Wastewater treatment methods, including biological, physical, and chemical techniques, have limitations in achieving complete removal of the refractory pollutants. Chemical methods, particularly advanced oxidation processes (AOPs), have gained special attention for their strong oxidation capacity and minimal secondary pollution. Among the various catalysts used in AOPs, natural minerals offer distinct advantages, such as low cost, abundant resources, and environmental friendliness. Currently, the utilization of natural minerals as catalysts in AOPs lacks thorough investigation and review. This work addresses the need for a comprehensive review of natural minerals as catalysts in AOPs. The structural characteristics and catalytic performance of different natural minerals are discussed, emphasizing their specific roles in AOPs. Furthermore, the review analyzes the influence of process factors, including catalyst dosage, oxidant addition, pH value, and temperature, on the catalytic performance of natural minerals. Strategies for enhancing the catalytic efficiency of AOPs mediated by natural minerals are explored, mainly including physical fields, reductant addition, and cocatalyst utilization. The review also examines the practical application prospects and main challenges associated with the use of natural minerals as heterogeneous catalysts in AOPs. This work contributes to the development of sustainable and efficient approaches for organic pollutant degradation in wastewater.

Textile dye removal in wastewater by peroxymonosulfate (PMS) activation on a zero-valent iron nanoparticle-modified ultrafiltration catalytic membrane (nZVI@PES)

The use of the nano zero-valent iron (nZVI) nanoparticle-based advanced oxidation systems in conjunction with an activator such as peroxymonosulfate (PMS) to generate hydroxyl and sulfate radicals for the degradation of organic pollutants has been extensively used in recent studies. In this study, a nZVI-modified polyethersulfone (PES) membrane (nZVI@PES) was produced successfully by attaching the nZVI catalytic nanoparticles on the surface of a commercial microporous polymeric membrane material using a simple and easy filter press coating method. The presence of nZVI nanoparticles on the nZVI@PES membrane was confirmed by XRD, SEM, and EDS analyses. The nZVI@PES membrane was applied in the dead-end filtration system in the presence of the PMS activator to treat the reactive black 5 (RB5) dye solution. The effect of catalyst loading, RB5 dye concentration, PMS dosage, and pH level on the nZVI@PES membrane/PMS system was investigated. Quenching experiments were carried out to identify the reactive species responsible, and reusability tests were conducted on the membrane. The highest decolorization efficiency (96.8%) was obtained at 20 mg/L RB5 dye solution, initial pH of 3, the nZVI loading of 5 mg/cm2, and the PMS dosage of 300 mg/L at the end of a reaction time of 30 min. The formation of HO•, [Formula: see text], [Formula: see text] and, 1O2 was confirmed by quenching experiments. The results indicate that the nZVI@PES membrane/PMS system could successfully treat wastewater contaminated with an organic dye.