Efficient removal of polybrominated diphenyl ethers from soil washing effluent by dummy molecular imprinted adsorbents: Selectivity and mechanisms

A review of passive acid mine drainage treatment by PRB and LPB: From design, testing, to construction

An extensive volume of acid mine drainage (AMD) generated throughout the mining process has been widely regarded as one of the most catastrophic environmental problems. Surface water and groundwater impacted by pollution exhibit extreme low pH values and elevated sulfate and metal/metalloid concentrations, posing a serious threat to the production efficiency of enterprises, domestic water safety, and the ecological health of the basin. Over the recent years, a plethora of techniques has been developed to address the issue of AMD, encompassing nanofiltration membranes, lime neutralization, and carrier-microencapsulation. Nonetheless, these approaches often come with substantial financial implications and exhibit restricted long-term sustainability. Among the array of choices, the permeable reactive barrier (PRB) system emerges as a noteworthy passive remediation method for AMD. Distinguished by its modest construction expenses and enduring stability, this approach proves particularly well-suited for addressing the environmental challenges posed by abandoned mines. This study undertook a comprehensive evaluation of the PRB systems utilized in the remediation of AMD. Furthermore, it introduced the concept of low permeability barrier, derived from the realm of site-contaminated groundwater management. The strategies pertaining to the selection of materials, the physicochemical aspects influencing long-term efficacy, the intricacies of design and construction, as well as the challenges and prospects inherent in barrier technology, are elaborated upon in this discourse.

Occurrence and ecotoxicological impacts of polybrominated diphenyl ethers (PBDEs) in electronic waste (e-waste) in Africa: Options for sustainable and eco-friendly management strategies

Polybrominated diphenyl ethers (PBDEs) are persistent contaminants used as flame retardants in electronic products. PBDEs are contaminants of concern due to leaching and recalcitrance conferred by the stable and hydrophobic bromide residues. The near absence of legislatures and conscious initiatives to tackle the challenges of PBDEs in Africa has allowed for the indiscriminate use and consequent environmental degradation. Presently, the incidence, ecotoxicity, and remediation of PBDEs in Africa are poorly elucidated. Here, we present a position on the level of contamination, ecotoxicity, and management strategies for PBDEs with regard to Africa. Our review shows that Africa is inundated with PBDEs from the proliferation of e-waste due to factors like the increasing growth in the IT sector worsened by the procurement of second-hand gadgets. An evaluation of the fate of PBDEs in the African environment reveals that the environment is adequately contaminated, although reported in only a few countries like Nigeria and Ghana. Ultrasound-assisted extraction, microwave-assisted extraction, and Soxhlet extraction coupled with specific chromatographic techniques are used in the detection and quantification of PBDEs. Enormous exposure pathways in humans were highlighted with health implications. In terms of the removal of PBDEs, we found a gap in efforts in this direction, as not much success has been reported in Africa. However, we outline eco-friendly methods used elsewhere, including microbial degradation, zerovalent iron, supercritical fluid, and reduce, reuse, recycle, and recovery methods. The need for Africa to make and implement legislatures against PBDEs holds the key to reduced effect on the continent.

Optimization and verification of selective removal of organophosphate esters from wastewater by molecularly imprinted adsorbent

Tributyl phosphate (TNBP), a new type of flame retardant, is an emerging pollutant and has been frequently detected in various matrices such as wastewater. Efficient removal of TNBP is critical for wastewater treatment. In this study, molecularly imprinted polymer (MIP) was prepared using precipitation polymerization for selective adsorption of TNBP. The results showed that MIP had a porous structure and formed effective imprinting cavities, which was primarily responsible for its superior adsorption ability. The adsorption of TNBP by MIP was carried out following both the pseudo-secondary kinetic model and the Langmuir isothermal adsorption model. MIP adsorbed TNBP rapidly and reached adsorption equilibrium within 30 min with 923 μmol g-1 at 298 K. The adsorption capacity and adsorption rate of MIP were respectively 2 and 5.49 times those of non-molecularly imprinted polymers. In addition, MIP could effectively counter disturbances from external parameters like temperature and pH, exhibiting strong environmental flexibility. MIP can specifically adsorb organophosphate esters, and can selectively adsorb TNBP under the interference of coexisting contaminants such as1,3-diphenylguanidine and isazofos. In actual bodies of water, MIP's highly selective adsorption of TNBP retains its advantage. The selective adsorption of MIP was mainly due to the common phosphate skeleton, and the specific substituent of organophosphate esters played an important role in the imprinting process. Hydrogen bonding might be involved in the polymerization process of TNBP with acrylamide and the adsorption process of TNBP by MIP.MIP exhibited good reuse efficiency, the total adsorption capacity decreased by no more than 25% after 7 reuse cycles. This study provides a simple and efficient method for selective removal of organophosphate from wastewater.

Optimisation of soil washing method for removal of petroleum hydrocarbons from contaminated soil around oil storage tanks using response surface methodology

Total petroleum hydrocarbons (TPHs), which are often found in soil, water, sediments, and air. These compounds are a type of pollutant that can have a serious negative impact on living things and human health. Soil washing method is a remediation technique used to remove contaminants from the soil. This process involves the use of water or other solvents to extract contaminants from the soil, followed by separation and disposal of the contaminated solution. This research engineered the effectiveness of soil washing method to remove TPHs from a genuine, sullied soil sample. After analyzing the physical and chemical properties of the soil, the Box-Benken Design (BBD) technique was used to optimize the variables that influence the process's effectiveness. A quadratic model was suggested based on the BBD design, correlation coefficients, and other factors. The minimum, maximum and mean removal of TPHs during the stages of the study were 63.5, 94.5 and 76.7%, respectively. The correlation between the variables was strong, as shown by the analysis of variance (ANOVA), F-value (1064.5) and P-value (0.0001), and the proposed model was highly significant. The most effective soil washing method (SWM) was obtained with pH 7.8, liquid to solid ratio 50:1, reaction time 52 min, surfactant concentration 7.9 mg kg-1, and three washings. A removal rate of 98.8% was accomplished for TPHs from the soil in this context. The kinetic results indicate that the kinetic of TPHs removal follows the first-order kinetics (R2 = 0.96). There was not a major difference in the process's efficiency based on temperature. The removal efficiency heightened from 0 to 150 rpm and then remained steady. Introducing air flow increased the rate of removal, and the combination of ultrasonic waves with the reaction environment increased the process efficiency and decreased the time for the process and the amount of times it needed to be washed. An analysis of the washed soil both physically and chemically revealed a substantial decrease in the concentration of other elements.

Development of a specific and sensitive method for the detection of glyphosate pesticide and its metabolite in tea using dummy molecularly imprinted solid-phase extraction coupled with liquid chromatography-tandem quadrupole mass spectrometry

Glyphosate, a widely used herbicide, and its primary metabolite aminomethyl phosphonic acid have been found to cause environmental and ecological issues and threaten human health. The conventional pretreatment method was insufficient for the extraction, concentration, and enrichment of trace substances, resulting in poor specificity. Thus, our objective was to develop a method for glyphosate pesticide detection using dummy molecularly imprinted solid-phase extraction (DMI-SPE) combined with liquid chromatography-tandem quadrupole mass spectrometry (DMI-SPE-LC/MS/MS). The sol-gel method was used to prepare the molecularly imprinted material, using glyphosine as the dummy template molecule, to achieve specific adsorption to glyphosate and reduce costs. The optimized polymerization conditions achieved maximum adsorption of 28.6 µg/mg glyphosate by the molecularly imprinted material. The established DMI-SPE-LC/MS/MS method was used to detect glyphosate and its metabolite (aminomethyl)phosphonic acid in tea. The concentration ranges of glyphosate and (aminomethyl)phosphonic acid (from 0.05 to 4 µg/mL) were linear with correlation coefficients of 0.999 and 0.991, respectively. The recoveries of (aminomethyl)phosphonic acid at three spiked levels ranged from 79.95% to 83.74%, with RSDs between 6.40% and 7.45%, while the recoveries of glyphosate ranged from 98.69% to 106.26%, with RSDs between 0.91% and 1.18%. Our results demonstrate that the developed DMI-SPE-LC/MS/MS method achieves high sensitivity and specific detection of glyphosate and its metabolite (aminomethyl)phosphonic acid in tea matrices.

Insight into the application of magnetic molecularly imprinted polymers in soil-washing effluent: Selective removal of 4,4'-dibromodiphenyl ether, high adaptivity of material and efficient recovery of eluent

Soil washing techniques can effectively remove soil polybrominated diphenyl ethers (PBDEs), but further removal of PBDEs from washing effluent is disrupted by environmental factors and coexisting organic matter. Hence, this work prepared novel magnetic molecularly imprinted polymers (MMIPs) to selectively remove PBDEs in soil washing effluent and recycling surfactants, with Fe₃O₄ nanoparticles as the magnetic core, methacrylic acid (MAA) as the functional monomer, and ethylene glycol dimethacrylate (EGDMA) as the cross-linker. Later, the prepared MMIPs were applied to adsorb 4,4'-dibromodiphenyl ether (BDE-15) in Triton X-100 soil-washing effluent and characterized by scanning electron microscopy (SEM), infrared spectrometry (FT-IR), nitrogen adsorption and desorption experiments. According to our observations, BDE-15 equilibrium adsorptions on dummy-template magnetic molecularly imprinted adsorbent (D-MMIP, 4-bromo-4'-hydroxyl biphenyl as template) and part-template magnetic molecularly imprinted adsorbent (P-MMIP, toluene as template) were reached within 40 min, and their equilibrium adsorption capacities were 164.54 μmol/g and 145.55 μmol/g, respectively, with imprinted factor α > 2.03, selectivity factor β > 2.14, and selectivity S > 18.05. MMIPs exhibited good adaptability to pH, temperature, and cosolvent. Our Triton X-100 recovery rate reached as high as 99.9%, and MMIPs maintained a more than 95% adsorption capacity after being recycled five times. Our results offer a novel approach to selectively remove PBDEs in soil-washing effluent, with efficient recovery of surfactants and adsorbents in soil-washing effluent.

Recent advances in the removal of emerging contaminants from water by novel molecularly imprinted materials in advanced oxidation processes-A review

Recently, there has been a global focus on effectively treating emerging contaminants (ECs) in water bodies. Advanced oxidation processes (AOPs) are the primary technology used for ECs removal. However, the low concentrations of ECs make it difficult to overcome the interference of background substances in complex water quality, which limits the practical application of AOPs. To address this limitation, many researchers are developing new catalysts with preferential adsorption. Molecular imprinting technology (MIT) combined with conventional catalysts has been found to effectively enhance the selectivity of catalysts for the targeted catalytic degradation of pollutants. This review presents a comprehensive summary of the progress made in research on molecularly imprinted polymers (MIPs) in the selective oxidation of ECs in water. The preparation methods, principles, and control points of novel MIP catalysts are discussed. Furthermore, the performance and mechanism of the catalysts in photocatalytic oxidation, electrocatalytic oxidation, and persulfate activation are analyzed with examples. The possible ecotoxicological risks of MIP catalysts are also discussed. Finally, the challenges and prospects of applying MIP catalysts in AOP are presented along with proposed solutions. This review provides a better understanding of using MIP catalysts in AOPs to target the degradation of ECs.