Determination of nickel and cobalt in reference plant materials by carbon slurry sampling GFAAS technique after their simultaneous preconcentration onto modified activated carbon

Determination of Ultra-Trace Cobalt in Water Samples Using Dispersive Liquid-Liquid Microextraction Followed by Graphite Furnace Atomic Absorption Spectrometry

A novel method for the determination of ultra-trace cobalt by dispersive liquid–liquid microextraction (DLLME) coupled with graphite furnace atomic absorption spectrometry has been developed. It is based on the color reaction of Co²⁺ with 2-(5-bromo-2-pyridylazo)-5-dimethylaminoaniline (5-Br-PADMA) in a Britton–Robinson buffer solution at pH 6.0 to form stable hydrophobic chelates, which were separated and enriched by DLLME with 1,2-dichloroethane (CH₂ClCH₂Cl) as extraction and acetonitrile (CH₃CN) as a dispersive solvent. The sedimented phase containing the chelates is then determined with GFAAS. Parameters that affect extraction efficiency, such as types and volumes of extraction and disperser solvents, pH of sample solution, extraction time, concentration of the chelating agent 5-Br-PADMA, and salt effect, were investigated. Under optimal conditions, the calibration graph was linear over the range 0.05–1.0 ng/mL, with a correlation coefficient of 0.9922 and a detection limit of 0.03 ng/mL. Preconcentration factor (PF) is calculated as the ratio of the aqueous solution volume (5 mL) to that of the organic phase volume (40 μL), and enrichment factor (EF) is calculated as the ratio of the slopes of the calibration graphs obtained with and without DLLME for 5.0 mL of sample solution, which were 120 and 112.5, respectively. The extraction efficiency, calculated by EF/PF·100, was 93.8%. The relative standard deviation (RSD) at the 0.5 ng/mL Co²⁺ level was 3.8% (n = 6). The method has been applied to the determination of trace cobalt in water samples with satisfactory results.

Contaminated Land by Wildfire Effect on Ultramafic Soil and Associated Human Health and Ecological Risk

The purpose of this study is the evaluation of fire effect on contaminated land and the assessment of the associated risk of human health and terrestrial ecological receptors. Ash and soil samples were gathered from burned and unburned areas (central Evia, Greece) which are adjacent with a Natura 2000 area. The geochemical dataset includes 20 sampling sites and 35 elements. The wildfire severity was investigated by applying a macroscopic approach and field observations. Statistical and spatial analysis were applied for delineating the distribution of elements in ash and soil. Elemental balance approach was performed for estimating net gain (+) or loss (−) to the ash. Element contents in sampling sites were compared to screening values proposed by the literature. Hundreds of hectares of burned land including wildland areas in central Evia are contaminated with (contents in mg Kg−1), Co (up to 43.5), Cr (up to 244), Mn (up to 1158), Ni (up to 463) associated with geogenic sources such as serpentinite peridotites and Ni-laterite deposits. Aluminum, As, Cd, Co, Cr, Fe, Mn, Ni, Pb, V and Zn contents recorded in the sampling sites are posing a potential risk to human health and ecological receptors.

Experimental and finite element method studies for femtomolar cobalt ion detection using a DHI modified nanochannel

In this work, a sensing nanochannel based on a N-[3-(triethoxysilyl)propyl]-4,5-dihydroimidazole (DHI) modified nanopipette was prepared and characterized for the ultrasensitive detection of cobalt ions (Co²⁺) in aqueous solutions.

Micronutrients (B, Co, Cu, Fe, Mn, Mo, and Zn) content in made tea (Camellia sinensis L.) and tea infusion with health prospect: A critical review

Tea (Camellia sinensis L.) is a perennial acidophilic crop, and known to be a nonalcoholic stimulating beverage that is most widely consumed after water. The aim of this review paper is to provide a detailed documentation of selected micronutrient contents, viz. boron (B), cobalt (Co), copper (Cu), iron (Fe), manganese (Mn), molybdenum (Mo), and zinc (Zn) in made tea and tea infusion. Available data from the literature were used to calculate human health aspect associated with the consumption of tea infusion. A wide range of micronutrients reported in both made tea and tea infusion could be the major sources of micronutrients for human. The content of B, Co, Cu, Fe, Mn, Mo, and Zn in made tea are ranged from 3.04 to 58.44 μg g^-1, below detectable limit (BDL) to 122.4 μg g^-1, BDL to 602 μg g^-1, 0.275 to 13,040 μg g^-1, 0.004 to 15,866 μg g^-1, 0.04 to 570.80 μg g^-1 and 0.01 to 1120 μg g^-1, respectively. Only 3.2 μg L^-1 to 7.25 mg L^-1, 0.01 μg L^-1 to 7 mg L^-1, 3.80 μg L^-1 to 6.13 mg L^-1, 135.59 μg L^-1 -11.05 mg L^-1, 0.05 μg L^-1 to 1980.34 mg L^-1, 0.012 to 3.78 μg L^-1, and 1.12 μg L^-1 to 2.32 μg L^-1 of B, Co, Cu, Fe, Mn, Mo, and Zn, respectively, are found in tea infusion which are lower than the prescribed limit of micronutrients in drinking water by World Health Organization. Furthermore, micronutrient contents in tea infusion depend on infusion procedure as well as on the instrument used for analysis. The proportion of micronutrients found in different tea types are 1.0-88.9% for B, 10-60% for Co, 2.0-97.8% for Cu, 67.8-89.9% for Fe, 71.0-87.4% for Mn, 13.3-34% for Mo, and 34.9-83% for Zn. From the results, it can also be concluded that consumption of three cups of tea infusion per day does not have any adverse effect on human health with respect to the referred micronutrients rather got beneficial effects to human.

The use of rapidly synergistic cloud point extraction for the separation and preconcentration of trace amounts of Ni (II) ions from food and water samples coupling with flame atomic absorption spectrometry determination

A novel improved preconcentration method known as rapidly synergistic cloud point extraction (RS-CPE) was established for nickel preconcentration and determination prior to its determination by flame atomic absorption spectrometry. In this work, the traditional CPE pattern was changed and greatly simplified in order to be applicable in metal extraction and detection. This method was accomplished in room temperature in 1 min. Non-ionic surfactant Triton X-114 was used as extractant. Octanol worked as cloud point revulsant and synergic reagent. The various parameters affecting the extraction and preconcentration of nickel such as sample pH, 2,2'-Furildioxime concentration, amounts of octanol, amounts of Triton X-114, type of diluting solvent, extraction time, and ionic strength were investigated and optimized. Under optimal conditions, the calibration curve showed an excellent linearity in the concentration range of 2-200 μg L(-1), and the limit of detection was 0.6 μg L(-1) for nickel. The developed method was successfully applied for the determination of nickel in food and water samples. The results showed that, the proposed method can be used as a cheap, rapid, and efficient method for the extraction and preconcentration of nickel from real samples.