Effect of fat and salt reduction on the changes in the concentrations of free amino acids and free fatty acids in Cheddar-style cheeses during maturation

Monomethyl branched-chain fatty acids-a pearl dropped in the ocean

As an emerging group of bioactive fatty acids, monomethyl branched-chain fatty acids (mmBCFAs) have sparked the interest of many researchers both domestically and internationally. In addition to documenting the importance of mmBCFAs for growth and development, there is increasing evidence that mmBCFAs are highly correlated with obesity and insulin resistance. According to previous pharmacological investigations, mmBCFAs also exhibit anti-inflammatory effects and anticancer properties. This review summarized the distribution of mmBCFAs, which are widely found in dairy products, ruminants, fish, and fermented foods. Besides, we discuss the biosynthesis pathway in different species and detection methods of mmBCFAs. With the hope to unveil their mechanisms of action, we recapitulated detailed the nutrition and health benefits of mmBCFAs. Furthermore, this study provides a thorough, critical overview of the current state of the art, upcoming difficulties, and trends in mmBCFAs.

Application of Commercial Biopreservation Starter in Combination with MAP for Shelf-Life Extension of Burrata Cheese

Burrata is a fresh pasta filata cheese manufactured in Italy. Its demand on the worldwide market is constantly growing, and prolonging its shelf-life is an important challenge for the Italian dairy industry. In the present study, combining a commercial bio-protective starter and modified atmosphere packaging (MAP) was evaluated as a strategy to delay the spoilage of product quality. Three experimental samples of burrata were produced by experimental trials at the industrial level and stored for 28 days under refrigerated conditions. Two samples contained the protective starter but were packaged differently (under MAP and immersed in water), and one did not contain the starter and was packaged under MAP. A sample of burrata without a starter and immersed in water was also prepared and used as a control. The combination of MAP and bio-protective starter delayed the degradation of lactose and citric acid, used as indices of microbial activity. In fact, lower counts of Enterobacteriaceae and Pseudomonas were observed in this sample. In contrast, control burrata had the highest level of total Volatile Organic Compounds (VOC) at the end of the storage period, because of higher microbial activity. Even though all samples were judged to be unacceptable after 28 days from the sensory point of view, the sample with bio-protective starter under MAP had the best score after 21 days, obtaining a shelf-life extension of about 7 days with respect to control. In conclusion, the combination of MAP and protective starter culture could be an easy way to extend the shelf-life of burrata stored under correct refrigerated conditions.

Proteolytic Development and Volatile Compounds Profile of Domiati Cheese under Modified Atmosphere Packaging

This study explored the impacts of modified atmosphere packaging (MAP) treatment on the proteolytic development and volatile compounds of Domiati cheese during storage. Domiati cheese samples were kept for 75 days at refrigerator temperature, under aerobic packaging (C1) or vacuum (C2). In parallel, other Domiati cheese samples were kept under MAP, at different levels of CO2 and N2, as follows: 10% CO2/90% N2 (D1), 15% CO2/85% N2 (D2), 25% CO2/75% N2 (D3), 100% CO2 (D4), and 100% N2 (D5). The normal control (C1) treatment showed the highest reduction in pH from 6.64 at zero time to 6.23 and 6.01 after 40 and 75 days of storage, respectively. On the other hand, the under-vacuum samples (C2) showed the lowest reduction in pH, from 6.64 at zero time to 6.49 and 6.28 after 40 and 75 days of storage, respectively. Proteolysis during cheese storage was lower in MAP of cheeses than in the C1 treatment. Total free amino acids (FAAs) were higher in C1 treatment than other cheeses during the whole storage period. The lowest level of total FAA was detected in D4 treatment after 75 days of storage. Volatile acids, aldehydes, ketones, and esters compounds were detected in all treatments during storage, but particularly higher in aerobic packaging than the other treatments after 75 days. The level of each acid compound increased with storage period, and the increases were particularly clear in pentanoic acid, hexanoic acid, heptanoic acid, benzoic acid, and n-decanoic acid. The normal control (C1) showed high contents of the different volatile ketone compounds. However, the samples packaged under 100% N2 (D5) showed the significantly highest levels of all the volatile ketones after 75 days of storage, particularly 2-pentanone, acetoin, methyl isobutyl ketone, 2-heptanone, 2-nonanone, and 2-undecanone. Some important compounds contributing to the good flavor of the cheese are acetic acid, butanoic acid, pentanal, benzaldehyde, acetoin, and 2,3-butanedione. The CO2 and N2 treatments exerted significant changes in all groups during the storage of cheese. All cheese samples showed gradual increases in CO2 co-occurring with parallel decreases in N2 during refrigerated storage periods, except for D4 treatment (100% CO2), which showed a decrease. A significant decrease in O2 level occurred in C1 treatment during cold storage.

The Effect of the Ratio of Gamma Aminobutyric Acid-Producing Saccharomyces cerevisiae DL6–20 and Kluyveromyces marxianus B13–5 Addition on Cheese Quality

Kazakh cheese is a traditional dairy product in Xinjiang, China. The function and potential probiotic characteristics of Saccharomyces cerevisiae DL6–20 and Kluyveromyces marxianus B13–5 in Kazakh cheese and its contribution to cheese fermentation was studied. In this study, the effect of the addition ratio of gamma aminobutyric acid (GABA)-producing S. cerevisiae DL6–20 and K. marxianus B13–5 on cheese quality was investigated. Cheeses were prepared by fermentations with a total of six treatments: comercial culture alone as control (CS), a combination with one yeast, either; K. marxianus B13–5 (CSM); S. cerevisiae DL6–20 (CSS); and three different proportions of this two yeasts (CSM:CSS 1:1, 1:2, 2:1). We measured the GABA content of cheese, as well as basic physical and chemical indicators, microbial content, free amino acid (FAA) content, texture, and flavor compound content. The total FAA content of mixed bacteria fermentation was higher than that of the single bacteria alone. The GABA content CSM:CSS 1:2 GABA content was 0.114 g/100 g, CSM:CSS 2:1 GABA content was 0.12 g/100 g, CSM:CSS1:1 content of GABA produced in the late ripening period of cheese was the highest, reaching 0.189 g/100 g and the number of LAB and yeasts in CSM:CSS 1:1 was higher than that of other cheeses. The mixed-strain fermentation generally produced cheeses with a higher protein content than that of the single-strain fermentation in the late stage of the maturation process, especially the protein content of CSM:CSS 1:1 during the ripening period, when the protein content was highest at day 50. CSM:CSS 1:1 had a low moisture content, making it easy to store. With the exception of water and protein content, there is no significant difference in other physical and chemical indicators. CSM:CSS 1:1 contributed to the formation of cheese texture. In addition, multivariate statistical analysis indicated that mixed-strain fermentation was beneficial to the production of cheese aroma, with the aroma production performance of CSM:CSS 1:2 and CSM:CSS 2:1 found to be better than that of CSM: CSS 1:1.

The Effect of Salt Reduction and Partial Substitution of NaCl by KCl on Physicochemical, Microbiological, and Sensorial Characteristics and Consumers' Acceptability of Semi-Hard and Hard Lactose-Free Cow's Milk Cheeses

Increasing consumer demand for healthier foods prompts the development of cheeses reduced in salt. The aim of his study was to assess the effect of reducing the level of sodium chloride (NaCl) and their partial substitution by potassium chloride (KCl) on the biochemical, microbiological, and sensorial characteristics and consumer's acceptability of semi-hard and hard lactose-free cow's milk cheeses. To improve the possible lower salty taste or the development of bitter taste, the addition to yeast extract, as a flavor enhancer, was also checked. Different brining times and brine conditions were tested to obtain a reduction of >25% of salt with respect to conventional cheese. Reduced-salt cheeses were elaborated by reducing half the salting time used in conventional cheeses, and a ratio of 60 Na⁺:40 K⁺ was used to reduce Na concentration in substituted cheeses. The results obtained in this study show that the reduction of salt by both methods in semi-hard and hard lactose-free cheeses could be an alternative for the production of healthier and sensorial acceptable cheeses, without significantly affecting their physicochemical characteristics. The addition of yeast extract, as a flavor enhancer, increased the free amino acids (FAAs) levels but decreased the acceptability of cheeses.

Content of Health-Promoting Fatty Acids in Commercial Sheep, Cow and Goat Cheeses

The study aimed to examine samples of different market original sheep cow and goat cheeses, in respect of the content and profile of FA with special emphasis on health-promoting FA. The content of fatty acids in the examined cheeses was highly differentiated and depended on the sort and type of cheese. The content of fatty acid groups in milk fat varied within the limits: SFA, 55.2–67.2%; SCSFA, 10.9–23.4%; BCFA, 1.6–2.9%; MUFA, 15.2–23.4%; PUFA, 1.9–4.3%; trans-MUFA, 1.8–6.0%; and CLA, 1.0–3.1%. From among the examined cheeses, the seasonal sheep cheeses (Oscypek) and mountain cow cheeses were characterized by the highest content of health-promoting fatty acids. The content of health-promoting fatty acids in the fat fraction of these cheeses was CLA 2.1–3.1%, trans-MUFA 3.5–6%, BCFA 2.7–2.9%, and SCSFA 12–18%.

Reduction in the Brining Time in Parmigiano Reggiano Cheese Production Minimally Affects Proteolysis, with No Effect on Sensory Properties

Brine soaking is one of the most important steps in the production of Parmigiano Reggiano cheese, since it determines the amount of salt in the final product. Reduction in salt in Parmigiano Reggiano cheese might be important for improving its nutritional profile, but it could affect the manufacturing processes by altering proteolysis and consequently the product quality. In this study, for the first time, salt reduction was explored at the industrial level on real cheese samples manufactured in a local dairy. In particular, 20 wheels were produced with conventional (18 days, 10 wheels) and shorter (12 days, 10 wheels) brining steps. In every group, wheels were studied at two different ripening times, 15 and 30 months. A shorter brining time resulted in an average 12% decrease in salt content. A full characterization of free amino acids and peptides was performed by LC-MS on all samples. Free amino acids and peptides, as expected, increased with ripening, due to proteolysis, with samples having low salt content showing a slightly faster increase when compared to standard ones, hinting to a slightly accelerated proteolytic process. Nonetheless, low-salt and conventional cheeses shared similar sensory profiles at both ripening times.

Optimizing the acceleration of Cheddar cheese ripening using response surface methodology by microbial protease without altering its quality features

Cheddar cheese proteolysis were accelerated employing Penicillium candidum PCA1/TT031 protease into cheese curd. In the present study, several of the significant factors such as protease purification factor (PF), protease concentration and ripening time were optimized via the response surface methodology (RSM). The ideal accelerated Cheddar cheese environment consisted of 3.12 PF, 0.01% (v/v) protease concentration and 0.6/3 months ripening time at 10 °C. The RSM models was verified to be the most proper methodology for the maintain of chosen Cheddar cheese. Under this experimental environment, the pH, acid degree value (ADV), moisture, water activity (a_w), soluble nitrogen (SN)%, fat and overall acceptability were found to be 5.4, 6.6, 35%, 0.9348, 18.8%, 34% and 13.6, respectively of ideal Cheddar cheese. Furthermore, the predicted and experimental results were in significant agreement, which confirmed the validity and reliability of the suggested method. In spite of the difference between the ideal and commercial Cheddar cheese in the concentration of some of amino acids and free fatty acids, the sensory evaluation did not show any significant difference in aroma profile between them.

Probiotic potential of γ-aminobutyric acid (GABA)-producing yeast and its influence on the quality of cheese

Kazakh cheese is a traditional dairy product in Xinjiang, China. To study the function and potential probiotic characteristics of yeast in Kazakh cheese and its contribution to cheese fermentation, we screened the γ-aminobutyric acid (GABA)-producing yeasts Pichia kudriavzevii 1-21, Kluyveromyces marxianus B13-5, Saccharomyces cerevisiae DL6-20, and Kluyveromyces lactis DY1-10. We investigated the potential probiotic properties of these strains and their use in cheese fermentation (cheeses designated CSP, CSM, CSS, and CSI, respectively); a control with no added yeast was designated CS. The results showed that the 4 yeast strains all showed high self-polymerization (2- and 24-h autoaggregation capacity of >80 and 90%, respectively), hydrophobicity (40-92% variation, low hydrophobicity in xylene, but within the range of probiotics), and the ability to survive the gastrointestinal tract (survival rate >75% after simulation), indicating the probiotic ability of the strains in vitro. The GABA production capacity of the CSM cheese increased (to 95.6 mg/100 g), but its protein content did not change significantly, and amino acid degradation was obvious. The GABA production capacity of the CSS cheese decreased (to 450 mg/kg); its protein content declined, and its amino acid content increased. Except for water and protein, we found no obvious differences in most physical and chemical indicators. Kluyveromyces marxianus B13-5 helped to form the desired texture. Multivariate statistical analysis showed that fermentation of the cheese with the 4 yeasts improved the production of esters and alcohols. The CSS cheese had good aroma production performance, because S. cerevisiae DL6-20 produced high concentrations of isoamyl alcohol, hexanoic acid ethyl ester, benzyl alcohol, octanoic acid ethyl ester, 3-hydroxy-2-butanone, and hexanoic acid; the content of 2-methyl-propanoic acid was low. Compared with the CSP cheese, the CSI and CSM cheeses had a fruitier aroma and a milder odor, but the CSI and CSM cheeses had high concentrations of ethyl acetate, butanoic acid, ethyl ester, 3-methyl-1-butanol-acetate, ethyl hexanoate, ethyl octanoate, acetic acid 2-phenylethyl ester, and ethyl lactate; concentrations of 3-methyl-butanoic acid, propanoic acid, acetic acid, and butanoic acid were low. The CSP cheese had stronger acid-producing ability. The order of fragrance production performance was CSS > CSI, CSM > CSP > CS. Research into the fermentation mechanisms of GABA-producing yeast in cheese will provide a theoretical basis for the quality control and industrial production of Kazakh cheese.

Peptide Profiling and Biological Activities of 12-Month Ripened Parmigiano Reggiano Cheese

Proteolysis degree, biological activities, and water-soluble peptide patterns were evaluated in 12 month-ripened Parmigiano Reggiano (PR) cheeses collected in different dairy farms and showing different salt and fat content. Samples classified in high-salt and high-fat group (HH) generally showed lower proteolysis degree than samples having low-salt and low-fat content (LL). This positive correlation between salt/fat reduction and proteolysis was also confirmed by the analysis of biological activities, as the LL group showed higher average values of angiotensin-converting enzyme (ACE)-inhibitory and antioxidant activities. UHPLC/HR-MS allowed the identification of 805 unique peptides: LL and HH groups shared 59.3% of these peptides, while 20.9% and 19.9% were LL and HH specific, respectively. Frequency analysis of peptides identified a core of 183 peptides typical of 12-month ripened PR cheeses (corresponding to the 22.7% of total peptides), but no significant differences were detected in peptide patterns between LL and HH groups. Forty bioactive peptides, including 18 ACE-inhibitors and 12 anti-microbial peptides, were identified, of which 25 firstly found in PR cheese. Globally, this work contributed to unraveling the potentially healthy benefits of peptides fraction in PR cheese and provided prior evidence that PR with reduced fat/salt content showed the highest antihypertensive and antioxidant activities.

Investigation of the Lactic Acid Bacteria in Kazak Cheese and Their Contributions to Cheese Fermentation

Kazak cheese is a traditional dairy product fermented by lactic acid bacteria (LAB) in Xinjiang. To investigate the LAB in Kazak cheese and their contributions to cheese fermentation, four representative LAB, Streptococcus thermophilus B8, Lactobacillus helveticus B6, Weissella confusa B14, and Lactobacillus rhamnosus B10, were isolated from Kazak cheese and subsequently used to ferment cheeses, which were named StC, LhC, WcC, and LrC, respectively. The result showed that most of the physical and chemical indicators had no significant difference, except for moisture and fat. W. confusa B14 was beneficial to the production of amino acids, whereas S. thermophilus B8 promoted the formation of organic acids and contributed to formation ideal texture property. Furthermore, the four cheeses all possessed a strong fruity aroma, with brandy, sweet, herbaceous, pungent, and fatty aromas being the most prominent in WcC. This is because L. helveticus B6 produced a high concentration of hexanal, nonanal, octanal, 3-methylbutanoic acid, ethyl acetate, ethyl butanoate, isoamyl acetate, and ethyl hexanoate in LhC. Research on the fermentation mechanism of LAB in cheese will provide a theoretical basis for the quality control and industrial production of Kazak cheese.

Reduced-sodium cheeses: Implications of reducing sodium chloride on cheese quality and safety

Sodium chloride (NaCl) universally well-known as table salt is an ancient food additive, which is broadly used to increase the storage stability and the palatability of foods. Though, in recent decades, use of table salt in foods is a major concern among the health agencies of the world owing to ill effects of sodium (Na) that are mostly linked to hypertension and cardiovascular diseases. As a result, food scientists are working to decrease the sodium content in food either by decreasing the rate of NaCl addition or by partial or full replacement of NaCl with other suitable salts like potassium chloride (KCl), calcium chloride (CaCl₂ ), or magnesium chloride (MgCl₂ ). However, in cheese, salt reduction is difficult to accomplish owing to its multifaceted role in cheese making. Considering the significant contribution in dietary salt intake (DSI) from cheese, researchers across the globe are exploring various technical interventions to develop reduced-sodium cheeses (RSCs) without jeopardizing the quality and safety of cheeses. Thus, the purpose of this study is to provide an insight of NaCl reduction on sensory, physicochemical, and technofunctional attributes of RSCs with an aim to explore various strategies for salt reduction without affecting the cheese quality and safety. The relationship between salt reduction and survival of pathogenic and spoilage-causing microorganisms and growth of RSCs microflora is also discussed. Based on the understanding of conceptual and applied information on the complex changes that occur in the development of RSCs, the quality and safety of RSCs can be accomplished effectively in order to reduce the DSI from cheese.

Salt Distribution in Raw Sheep Milk Cheese during Ripening and the Effect on Proteolysis and Lipolysis

The salt distribution process in artisanal sheep cheese with an innovative shape of eight lobes was investigated. The cheese was subjected to two brining conditions: 24 h with brine at 16°Baumé and 12 h at 22°Baumé. The chemical composition (pH, water activity, dry matter, fat, and protein content), proteolysis (nitrogen fractions and free amino acids), and lipolysis (free fatty acids) were evaluated in two sampling zones (internal and external) at 1, 15, 30, 60, 90, 120, 180, and 240 days of ripening. The whole cheese reached a homogeneous salt distribution at 180 days of ripening. Brining conditions did not have an influence on the rate of salt penetration, but on the final sodium chloride (NaCl) content. Cheese with higher salt content (3.0%) showed increased proteolysis and lipolysis as compared to cheese with lower salt content (2.2%). Proteolysis index and total free fatty acids did not differ significantly (p > 0.05) between internal and external zones of cheese. It is suggested that producers start marketing this artisanal cheese at 6 months of ripening, when it has uniform composition and salt distribution.

Influence of Monascus purpureus BD-M-4 on the physicochemical properties, proteolysis and volatile compounds of surface mould-ripened cheese

The effect of adjunct culture Monascus purpureus BD-M-4 on the physicochemical, proteolytic, and lipolytic properties of surface mold-ripened cheese were evaluated. During the maturation of Monascus-fermented cheese, the total microbiota count and the content of soluble nitrogen increased steadily, whereas the total protein content showed no significant difference. Moreover, a 17-fold increase in total free amino acids was observed in Monascus-fermented cheese. The use of adjunct culture M. purpureus BD-M-4 in the production of surface-ripened cheeses did not show a significant effect on the total fat content in the ripening period, nor did it change the lipolysis of cheese during ripening. Compared to 52 volatile compounds of the control cheese, a total of 62 compounds were detected in M. purpureus-fermented cheese, including 16 acids, 16 ketones, 11 alcohols, 5 aldehydes, 11 esters, and 3 unclassified compounds.

Effects of Proteolytic and Lipolytic Enzyme Supplementations on Lipolysis and Proteolysis Characteristics of White Cheeses

Effects of proteolytic (Neutrase, Bacillus subtilis-originate, 0.20 (P1) and 0.40 g 100 L-¹ (P2)) and lipolytic (Piccantase A, Mucor miehei-originated, 0.05 (L1) and 0.10 g 100 L-¹ (L2)) enzyme supplementations to cheese milk on lipolysis and proteolysis characteristics of 90-day ripened cheese samples were investigated in this study. While enzyme supplementation did not have significant effects on titratable acidity, fat and protease-peptone nitrogen ratios of cheese samples, dry matter, salt, protein, water soluble nitrogen, 12% trichloroacetic acid soluble nitrogen ratio (TCA-SN), 5% phosphotungstic acid soluble nitrogen (PTA-SN), casein nitrogen ratios, penetrometer value, total free fatty acids (TFFA) and total free amino acids (TFAA) were significantly influenced by enzyme supplementations. Individual free amino acids (15 of them) were also determined. Free amino acid contents of enzyme-supplemented cheeses were higher than the control cheese and the values increased in all cheese samples with the progress of ripening (p < 0.05). The highest amino acids in all periods of ripening were identified as glutamic acid, lysine, proline and aspartic acid. The major (Ca, P, Na, K, Mg) and minor (Zn, Fe, Cu, Mn) mineral levels of cheeses decreased with the progress of ripening and the effects of enzyme supplementations on these attributes (except for magnesium and manganese) were found to be significant (p < 0.01). As to conclude, enzyme supplementations increased proteolysis and lipolysis and accelerated ripening and thus reduced ripening durations. Especially the enzyme ratios in P1 and L1 cheeses were found to be suitable for reducing the ripening period in White cheese without any adverse effects.