Co-encapsulation of Lactobacillus helveticus cells and green tea extract: Influence on cell survival in simulated gastrointestinal conditions

Effect of Goji Berry extract on cell viability of Lactiplantibacillus plantarum M5 microcapsules during in vitro gastrointestinal digestion

Lactiplantibacillus plantarum M5 and Goji Berry extract were co-microencapsulated to maintain the activity of cells during gastrointestinal digestion, and the mechanism by which they could maintain high activity was investigated. The results showed that the microcapsules with 3% Goji Berry extract(A-GE-3) had the largest encapsulation efficiency(EE) of 92.41 ± 0.58%. SEM showed that the structure of A-GE-3 microcapsules were smoother and denser. Cell viability in A-GE-3 microcapsules remained at 7.17 log10 CFU/g after gastrointestinal digestion. Meanwhile, during the gastrointestinal digestion with 3% Goji Berry extract, cell membrane damage detected by fluorescent probes propidium iodide(PI) and 1.1-N-phenylnaphthylamine(NPN) was significantly reduced; the contents of arginine, glutamic acid and oleic acid in cell membrane were increased, which helped to maintain the dynamic balance of intracellular pH and regulated cell membrane fluidity in response to gastrointestinal environment. This study demonstrated the potential of Goji Berry extract as a probiotic protector in gastrointestinal digestion.

Fabrication of dry S/O/W microcapsule and its probiotic protection against different stresses

BACKGROUND

Encapsulation is commonly used to protect probiotics against harsh stresses. Thus, the fabrication of microcapsules with special structure is critical. In this work, microcapsules with the structure of S/O/W (solid-in-oil-in-water) emulsion were prepared for probiotics, with butterfat containing probiotics as the inner core and with whey protein isolate fibrils (WPIF) and antioxidants (epigallocatechin gallate, EGCG; glutathione, GSH) as the outer shell.

RESULTS

Based on the high viscosity and good emulsifying ability of WPIF, dry well-dispersed microcapsules were successfully prepared via the stabilization of the butterfat emulsion during freeze-drying with 30-50 g L-1 WPIF. WPIF, WPIF + EGCG, and WPIF + GSH microcapsules with 50 g L-1 WPIF protected probiotics very well against different stresses and exhibited similar inactivation results, indicating that EGCG and GSH exerted neither harm or protection on probiotics. This significantly reduced the harmful effects of antioxidants on probiotics. Almost all the probiotics survived after pasteurization, which was critical for the use of probiotics in other foods. The inactivation values of probiotics in microcapsules were around 1 log in simulated gastric juice (SGJ), about 0.5 log in simulated intestinal juice (SIJ), and around 1 log after 40 days of ambient storage.

CONCLUSION

Dry S/O/W microcapsule, with butterfat containing probiotics as the inner core and WPIF as the outer shell, significantly increased the resistance of probiotics to harsh environments. This work proposed a preparation method of dry S/O/W microcapsule with core/shell structure, which could be used in the encapsulation of probiotics and other bioactive ingredients.

Advances in polysaccharides for probiotic delivery: Properties, methods, and applications

Probiotics are essential to improve the health of the host, whereas maintaining the viability of probiotics in harsh environments remains a challenge. Polysaccharides have non-toxicity, excellent biocompatibility, and outstanding biodegradability, which can protect probiotics by forming a physical barrier and show a promising prospect for probiotic delivery. In this review, we summarize polysaccharides commonly used for probiotic microencapsulation and introduce the microencapsulation technologies, including extrusion, emulsion, spray drying, freeze drying, and electrohydrodynamics. We discuss strategies for better protection of probiotics and introduce the applications of polysaccharides-encapsulated probiotics in functional food, oral formulation, and animal feed. Finally, we propose the challenges of polysaccharides-based delivery systems in industrial production and application. This review will help provide insight into the advances and challenges of polysaccharides in probiotic delivery.

Synbiotic formulations with microbial biofilm, animal derived (casein, collagen, chitosan) and plant derived (starch, cellulose, alginate) prebiotic polymers: A review

The need for a broader range of probiotics, prebiotics, and synbiotics to improve the activity and functioning of gut microbiota has led to the development of new nutraceuticals formulations. These techniques majorly depend on the type of the concerned food, inclusive factors i.e. application of biotic components, probiotics, and synbiotics along with the type of encapsulation involved. For improvisation of the oral transfer mode of synbiotics delivery within the intestine along with viability, efficacy, and stability co-encapsulation is required. The present study explores encapsulation materials, probiotics and prebiotics in the form of synbiotics. The emphasis was given to the selection and usage of probiotic delivery matrix or prebiotic polymers, which primarily include animal derived (gelatine, casein, collagen, chitosan) and plant derived (starch, cellulose, pectin, alginate) materials. Beside this, the role of microbial polymers and biofilms (exopolysaccharides, extracellular polymeric substances) has also been discussed in the formation of probiotic functional foods. In this instance, the microbial biofilm is also used as suitable polymeric compound for encapsulation providing stability, viability, and efficacy. Thus, the review highlights the utilization of diverse prebiotic polymers in synbiotic formulations, along with microbial biofilms, which hold great potential for enhancing gut microbiota activity and improving overall health.

High-speed electrospinning of phycocyanin and probiotics complex nanofibrous with higher probiotic activity and antioxidation

This study reports for the first time the co-encapsulation of probiotics and phycocyanin by electrospinning. SEM showed that the electrospun fibers exhibited a homogeneous, smooth surface and a circular shape. XRD and ATR-FTIR results showed that Lactiplantibacillus plantarum 1-24-LJ and Pc were co-embedded in the fibers and that the presence of L. plantarum 1-24-LJ promoted the encapsulation of phycocyanin. TG analysis showed that the addition of phycocyanin and L. plantarum 1-24-LJ improved the composite fiber's thermal stability. The fibers co-embedded with phycocyanin and L. plantarum 1-24-LJ had the highest DPPH and ABTS⁺ activity, indicating that the two may have synergistic antioxidant effects. After 28 days, the viability of the strain could still be above 6 log cfu/g, and the addition of phycocyanin could help to improve the strain's survivability. In this experiment, a co-embedding method for probiotics and antioxidants was proposed, which could effectively increase the survivability of probiotics and improve the antioxidant properties of the fibers.

Enhanced encapsulation efficiency and controlled release of co-encapsulated Bacillus coagulans spores and vitamin B9 in gellan/κ-carrageenan/chitosan tri-composite hydrogel

The current study, for the first time, attempts to co-encapsulate Bacillus coagulans spores as probiotics and vitamin B9 in the polysaccharide-based matrix for their targeted delivery. Instead of vegetative cells, probiotic spores were chosen owing to their higher stability. The matrix, tri-composite hydrogel, was synthesized from gellan, κ-carrageenan, and chitosan through self-assembly devoid of chemical cross-linkers. Hence, it was found suitable for application in the co-encapsulation of bioactive compounds. The synthesized hydrogel showed remarkable encapsulation efficiency for folic acid and probiotic spores, both individually and in combination. At acidic pH, loaded hydrogel exhibited 28.42 % and 45.14 % release of spores and folic acid, respectively, which was comparatively lower than the trends observed under neutral and alkaline pH. These results were correlated with the release pattern observed during in vitro digestibility studies. Moreover, spore conversion to vegetative cells and its high colonization were observed in the simulated intestinal phase. Therefore, the matrix maintained viability and stability of co-encapsulated folic acid and bacterial spores in gastric pH while they were slowly released in the intestinal phase. These promising findings pave the way to develop a natural matrix for co-encapsulating various bioactive compounds and probiotics.

Biopolymer-Based Multilayer Microparticles for Probiotic Delivery to Colon

The potential health benefits of probiotics may not be realized because of the substantial reduction in their viability during food storage and gastrointestinal transit. Microencapsulation has been successfully utilized to improve the resistance of probiotics to critical conditions. Owing to the unique properties of biopolymers, they have been prevalently used for microencapsulation of probiotics. However, majority of microencapsulated products only contain a single layer of protection around probiotics, which is likely to be inferior to more sophisticated approaches. This review discusses emerging methods for the multilayer encapsulation of probiotic using biopolymers. Correlations are drawn between fabrication techniques and the resultant microparticle properties. Subsequently, multilayer microparticles are categorized based on their layer designs. Recent reports of specific biopolymeric formulations are examined regarding their physical and biological properties. In particular, animal models of gastrointestinal transit and disease are highlighted, with respect to trials of multilayer microencapsulated probiotics. To conclude, novel materials and approaches for fabrication of multilayer structures are highlighted.

Probiotics and plant extracts: a promising synergy and delivery systems

There is a current interest in healthy diets and supplements, indicating the relevance of novel delivery systems for plant extracts rich in bioactive compounds and probiotics. This simultaneous delivery system can be prospective for health. In this sense, investigating foods rich in bioactive compounds or supplemented by them for incorporating probiotics and some approaches to improve probiotic survivability, such as the choice of resistant probiotic strains or microencapsulation, is valuable. This review addresses a brief discussion about the role of phenolic compounds, chlorophyll and carotenoids from plants and probiotics in gut health, indicating the benefits of this association. Also, an overview of delivery systems used in recent studies is shown, considering their advantages for incorporation in food matrices. Delivery systems containing compounds recovered from plants can reduce probiotic oxidative stress, improving survivability. However, investigating the beneficial concentration of some bioactive compounds from plant extracts is relevant due to their antimicrobial potential. In addition, further clinical trials and toxicological studies of plant extracts are pertinent to ensure safety. Thus, the recovery of extracts from plants emerges as an alternative to providing multiple compounds with antioxidant potential, increasing the preservation of probiotics and allowing the fortification or enrichment of food matrices.

Co-encapsulation of vitamin D and rutin in chitosan-zein microparticles

There is a growing interest in co-encapsulating multiple species to harness potential synergy between them, enhance their stability and efficacy in various products. The aim of this work was to co-encapsulate vitamin D3 and rutin inside chitosan-zein microparticles using a simple and easily scalable process for food fortification. This was achieved via anti-solvent precipitation coupled with spray-drying. Free-flowing powders of spherical microparticles with wrinkled surface and particle size < 10 μm were obtained. The encapsulation efficiency was 75% for vitamin D3 and 44% for rutin and this could be attributed to their different molecular size and affinity to the aqueous phase. The physicochemical properties were characterized by X-Ray powder diffraction and Fourier transform infrared spectroscopy. The two crystalline bioactive compounds were present in the microparticles in amorphous form, which would allow for better bioavailability when compared to non-encapsulated crystalline solid. Therefore, the obtained microparticles would be suitable for use as food ingredient for vitamin D3 fortification, with the co-encapsulated rutin acting as stability and activity enhancer.

Optimization of calcium pectinate gel production from high methoxyl pectin

BACKGROUND

Calcium pectinate (CaP) gel is traditionally prepared by de-esterifying high methoxyl pectin (HMP) to low methoxyl pectin (LMP), followed by gelation with calcium. To save both time and cost in the production of CaP gel, an alternative method was developed by the addition of CaCl₂ to HMP at alkaline pH. To optimize the production, response surface methodology (RSM) was used to investigate the effects of temperature (30-50 °C), time (20-40 min) and pH (8-10) on yield, calcium content of the CaP gel and the degree of esterification (DE) of pectin following decalcification of CaP (DC-pectin).

RESULTS

The linear term for pH had a significant effect (P < 0.01) on all three responses, whereas interaction effects were not significant (P > 0.01), except on the calcium content (P < 0.01). The optimized process conditions (temperature, time and pH) to obtain maximum CaP-HMP gel yield (88.83%) were 50 °C, 40 min and pH 9.6, and for the highest calcium content (97.23 mg g^-1 ) they were 40 °C, 30 min and pH 9.7. DC-pectin was a typical LMP with DE varying from 26.92% to 50.33%. The DE of DC-pectin could be predicted by a model that proved significant (R²  = 0.9888).

CONCLUSION

The optimum conditions were established to produce CaP gels from HMP with high yield and calcium content. Also, LMP with predictable DE can be produced following a significant model. This study provides new insights into the production and application of CaP gel. © 2021 Society of Chemical Industry.

Physicochemical and Functional Characterization of Newly Designed Biopolymeric-Based Encapsulates with Probiotic Culture and Charantin

The identification of novel sources of synbiotic agents with desirable functionality is an emerging concept. In the present study, novel encapsulates containing probiotic L. acidophilus LA-05^® (LA) and Charantin (CT) were produced by freeze-drying technique using pure Whey Protein Isolate (WPI), pure Maltodextrin (MD), and their combination (WPI + MD) in 1:1 core ratio, respectively. The obtained microparticles, namely WPI + LA + CT, MD + LA + CT, and WPI + MD + LA + CT were tested for their physicochemical properties. Among all formulations, combined carriers (WPI + MD) exhibited the highest encapsulation yields for LA (98%) and CT (75%). Microparticles showed a mean d (4, 3) ranging from 50.393 ± 1.26 to 68.412 ± 3.22 μm. The Scanning Electron Microscopy revealed uniformly amorphous and glass-like structures, with a noticeably reduced porosity when materials were combined. In addition, Fourier Transform Infrared spectroscopy highlighted the formation of strong hydrogen bonds supporting the interactions between the carrier materials (WPI and MD) and CT. In addition, the thermal stability of the combined WPI + MD was superior to that of pure WPI and pure MD, as depicted by the Thermogravimetric and Differential Scanning Calorimetry analysis. More interestingly, co-encapsulation with CT enhanced LA viability (8.91 ± 0.3 log CFU/g) and Cells Surface Hydrophobicity (82%) in vitro, in a prebiotic-like manner. Correspondingly, CT content was heightened when co-encapsulated with LA. Besides, WPI + MD + LA + CT microparticles exhibited higher antioxidant activity (79%), α-amylase inhibitory activity (83%), and lipase inhibitory activity (68%) than single carrier ones. Furthermore, LA viable count (7.95 ± 0.1 log CFU/g) and CT content (78%) were the highest in the blended carrier materials after 30 days of storage at 4 °C. Synbiotic microparticle WPI + MD + LA + CT represents an effective and promising approach for the co-delivery of probiotic culture and bioactive compounds in the digestive tract, with enhanced functionality and storage properties.

Co-Encapsulated Synbiotics and Immobilized Probiotics in Human Health and Gut Microbiota Modulation

Growing interest in the development of innovative functional products as ideal carriers for synbiotics, e.g., nutrient bars, yogurt, chocolate, juice, ice cream, and cheese, to ensure the daily intake of probiotics and prebiotics, which are needed to maintain a healthy gut microbiota and overall well-being, is undeniable and inevitable. This review focuses on the modern approaches that are currently being developed to modulate the gut microbiota, with an emphasis on the health benefits mediated by co-encapsulated synbiotics and immobilized probiotics. The impact of processing, storage, and simulated gastrointestinal conditions on the viability and bioactivity of probiotics together with prebiotics such as omega-3 polyunsaturated fatty acids, phytochemicals, and dietary fibers using various delivery systems are considered. Despite the proven biological properties of synbiotics, research in this area needs to be focused on the proper selection of probiotic strains, their prebiotic counterparts, and delivery systems to avoid suppression of their synergistic or complementary effect on human health. Future directions should lead to the development of functional food products containing stable synbiotics tailored for different age groups or specifically designed to fulfill the needs of adjuvant therapy.

Co-encapsulation of Dictyophora indusiata to improve Lactobacillus acidophilus survival and its effect on quality of sweet fermented rice (Khoa-Mak) sap beverage

Egg and fruiting body of bamboo mushroom at the concentrations of 0, 0.8, 1 and 3% (w/v) were added during encapsulation of Lactobacillus acidophilus TISTR 2365 in alginate beads. The influence of addition of co-encapsulated, encapsulated and free probiotic cells on the microbiological, physico-chemical, antioxidant and sensory properties of Khoa-Mak sap beverages during storage at 4 °C for 35 days were investigated. All encapsulation formulations indicated high encapsulation yields of 95.72-98.86% and also influenced positively several characteristics such as ethanol, titratable acidity, reducing sugar, probiotic survival and sensory properties. High viability of L. acidophilus (> 8 log CFU/g) in all bead formulations was maintained above the recommended minimum therapeutic throughout storage of Khoa-Mak sap beverages. Moreover, the incorporation of bamboo mushroom, particularly 3% egg stage in beads (AEB3) increased the survival of L. acidophilus in Khoa-Mak saps during storage. The addition of either egg or fruiting body of bamboo mushroom from 0.8 to 3% in beads resulted in the significant increasing of total phenolic contents and their DPPH radical scavenging activities, and also without negative impact sensory attributes.

Supplementary Information

The online version contains supplementary material available at 10.1007/s13197-021-05101-9.

Co-encapsulation of probiotics with prebiotics and their application in functional/synbiotic dairy products

Oral administration of live probiotics along with prebiotics has been suggested with numerous beneficial effects for several conditions including certain infectious disorders, diarrheal illnesses, some inflammatory bowel diseases, and most recently, irritable bowel syndrome. Though, delivery of such viable bacteria to the host intestine is a major challenge, due to the poor survival of the ingested probiotic bacteria during the gastric transit, especially within the stomach where the pH is highly acidic. Although microencapsulation has been known as a promising approach for improving the viability of probiotics in the human digestive tract, the success rate is not satisfactory. For this reason, co-encapsulation of probiotics with probiotics has been practised as a novel alternative approach for further improvement of the oral delivery of viable probiotics toward their targeted release in the host intestine. This paper discusses the co-encapsulation technologies used for delivery of probiotics toward better stability and viability, as well the incorporation of co-encapsulated probiotics and prebiotics in functional/synbiotic dairy foods. The common encapsulation technologies (and the materials) used for this purpose, the stability and survival of co-encapsulated probiotics in the food, and the release behavior of the co-encapsulated probiotics in the gastrointestinal tract have also been explained. Most studies reported a significant improvement particularly in the viability of bacteria associated with the presence of prebiotics. Nevertheless, the previous research has mostly been carried out in the simulated digestion, meaning that future systematic research is to be carried out to investigate the efficacy of the co-encapsulation on the survival of the bacteria in the gut in vivo.

A Brief Review of Edible Coating Materials for the Microencapsulation of Probiotics

The consumption of probiotics has been associated with a wide range of health benefits for consumers. Products containing probiotics need to have effective delivery of the microorganisms for their consumption to translate into benefits to the consumer. In the last few years, the microencapsulation of probiotic microorganisms has gained interest as a method to improve the delivery of probiotics in the host as well as extending the shelf life of probiotic-containing products. The microencapsulation of probiotics presents several aspects to be considered, such as the type of probiotic microorganisms, the methods of encapsulation, and the coating materials. The aim of this review is to present an updated overview of the most recent and common coating materials used for the microencapsulation of probiotics, as well as the involved techniques and the results of research studies, providing a useful knowledge basis to identify challenges, opportunities, and future trends around coating materials involved in the probiotic microencapsulation.

Probiotic Incorporation in Edible Films and Coatings: Bioactive Solution for Functional Foods

Nowadays, the consumption of food products containing probiotics, has increased worldwide due to concerns regarding healthy diet and wellbeing. This trend has received a lot of attention from the food industries, aiming to produce novel probiotic foods, and from researchers, to improve the existing methodologies for probiotic delivery or to develop and investigate new possible applications. In this sense, edible films and coatings are being studied as probiotic carriers with many applications. There is a wide variety of materials with film-forming ability, possessing different characteristics and subsequently affecting the final product. This manuscript aims to provide significant information regarding probiotics and active/bioactive packaging, to review applications of probiotic edible films and coatings, and to discuss certain limitations of their use as well as the current legislation and future trends.