In vitro glycemic index, bile acid binding capacity and mineral bioavailability of spaghetti supplemented with resistant starch type 4 and wheat bran

Improving functional and nutritional profiles of barley flours with diverse starch types through pearling

A comparative analysis of chemical, functional, and digestive parameters was conducted on five new barley genotypes designed for food purposes, differing in starch type, β-glucans, and arabinoxylan content. Both whole and pearled grain flours were examined. Amylose exhibited positive correlations with least gelation capacity (r = 0.60), gelation temperature (r = 0.90), and resistant starch (r = 0.80). Waxy varieties showed greater water-holding capacity, viscosity, and rapid digestibility compared to normal and high-amylose varieties. Pearling (10%) decreased arabinoxylans by 48% and proteins by 7%, while increasing β-glucans by 8% and starch by 13%. Additionally, pearling improved viscosity and hydration parameters across varieties. This allowed normal and high-amylose genotypes to enhance their functional properties and nutritional value through increased β-glucan and resistant starch content. This exploration advances the understanding of barley's functional attributes for food industry and underscores the potential of pearling to augment consumer nutritional value and health-promoting properties.

Comparison of anti-allergic activities of different types of lotus seed resistant starch in OVA-induced mouse model

Currently, evidence from observational studies suggests dietary fiber intake may be associated with decreased risk of food allergy. As a type of dietary fiber, resistant starch was also widely reported to possess anti-allergic properties. However, there is a relative paucity of studies assessing the influence of resistant starch types on their anti-allergic activity and its possible underlying mechanisms. In the current study, the anti-allergic effects of RS3-type (retrograded starch), RS4-type (chemically modified starch, cross-bonded), and RS5-type (starch-palmitic acid complex) of lotus seed resistant starch were evaluated in the OVA (100 mg/kg)-induced food allergic mice model. The results showed that oral administration of RS3 or RS4 lotus seed resistant starch (0.3 g/100 g b.w.) for 25 days significantly improved adverse symptoms of food allergy such as weight loss, increases in allergy symptom score and diarrhea rate; with significant reduction of serum specific antibody IgE, TNF-α, IL-4 levels and improved Th1/Th2 balance being observed. The mechanism may involve the regulation of lotus seed resistant starch on intestinal flora and the metabolites short-chain fatty acids and bile acids. Taken together, the findings may enhance understanding towards ameliorative effects of resistant starch on food allergy, and offer valuable insights for the exploration of novel anti-allergic bioactive compounds.

Effect of lotus seed resistant starch on the bioconversion pathway of taurocholic acid by regulating the intestinal microbiota

Taurocholic acid (TCA) is abundant in the rat intestine and has multiple health benefits. In the gut, intestinal microbiota can transform TCA into different bile acid (BA) derivatives, with the composition of microbiota playing a crucial role in the transformation process. This study aims to investigate how lotus seed resistant starch (LRS) can regulate microbiota to influence BA transformation. A fecal fermentation study was conducted in vitro, using either LRS, high-amylose maize starch (HAMS), or glucose (GLU) to analyze microbiota composition, BA content, and metabolic enzyme activities over different fermentation times. Bioinformatics analysis found that LRS increased the relative abundance of Enterococcus, Bacillus, and Lactobacillus, and decreased Escherichia-Shigella, compared with HAMS and GLU. LRS also reduced total BA content and accelerated the conversion of TCA to cholic acid, deoxycholic acid, and other derivatives. These results reveal that LRS and GLU tend to mediate the dehydroxy pathway, whereas HAMS tends to secrete metabolic enzymes in the epimerization pathway. Therefore, the evidence that LRS may regulate TCA bioconversion may benefit human colon health research and provide an important theoretical basis, as well as offer new concepts for the development of functional foods.

Self-assembly of coconut residue fiber with chitosan: Effect of three pre-treatments on the self-assembly process and bile salt adsorption

Self-assembly with chitosan is a promising method for improving bile salt (BS) adsorption by coconut residue fiber (CRF). To study the self-assembly process, three pre-treatments were performed and investigated using microrheological analysis. The effects of the pretreatments on the self-assembly of CRF and the BS adsorption were evaluated. During self-assembly, CRFs underwent Brownian-like motion, and the addition of chitosan facilitated the formation of inter-particle interactions between CRFs in the system. These interactions were small in extent, large in number, and slow to state change, in addition to relatively high strength and longer maintenance, all of which contributed to the binding to BS. The conventional pretreatments failed to effectively improve the BS adsorption of the self-assembled CRFs and weakened the inter-particle interactions in the system. These results suggest that chitosan assists in the adsorption of self-assembled CRF to BS through a combination of H-bonds and other weak intermolecular forces.

Structural, physicochemical properties and noodle-making potential of quinoa starch and type 3, type 4, and type 5 quinoa resistant starch

This study prepared type 3, type 4, and type 5 quinoa resistant starch (QRS3, QRS4, and QRS5) from quinoa starch (QS), compared their structural and physicochemical properties and evaluated their noodle-making potential. The results showed that the molecular weight of QRS3 decreased, the number of short-chain molecules increased, and its crystal type changed to B-type after gelatinization, enzymatic hydrolysis, and retrogradation. QRS4 is a phosphorylated cross-linked starch, with a surface morphology, particle size range, and crystal type similar to QS, but displaying modified thermodynamic properties. QRS5 is a complex of amylose and palmitic acid. It displays typical V-type crystals, mainly composed of long chain molecules and primarily exhibits a block morphology. The noodles prepared by replacing 20 % wheat flour with QS, QRS3 and QRS5 have higher hardness and are suitable for people who like elasticity and chewiness. QRS4 noodles are softer and suitable for people like elderly and infants who prefer soft foods. In conclusion, significant differences were evident between the fine structures, crystal types, physicochemical properties and potential applications of QS and the three QRSs. The results may expand the application of QS and QRS in the food and pharmaceutical industries.

A New Functional Wheat Flour Flatbread (Bazlama) Enriched with High-β-Glucan Hull-Less Barley Flour

Although the Med-Diet is a healthy diet model, it is affected by current dietary habits. Therefore, new foods with improved nutritional value should be developed to respond to the needs of people following the Med-Diet. This study was focused on developing high-β-glucan flat bread (bazlama) with a relatively lower GI. A bread wheat (cv. Tosunbey) flour was enriched with the flour of a high-β-glucan-content hull-less barley (cv. Chifaa) flour (15, 30, 45 and 60%) to develop a functional bazlama. The nutritional and technological properties of bazlama samples enriched with barley flour were compared with the ones produced from bread wheat. All of the barley flour-enriched bazlama samples had higher yellowness values (b*) than the control (both crumb and crust), which is generally preferred by the consumers. Texture results indicated that bazlama samples became harder with the increase in barley flour supplementation level. The results showed that 3 g of β-glucan can be provided from the barley flour-enriched bazlama samples (at 45 and 60% levels), and this is the limit to carry health claims. The bazlama samples enriched with barley flour were richer in Mg, K, Mn, Fe, and Zn minerals than the control (100% Tosunbey flour). While the glycemic index (GI) of commercial bread wheat and Tosunbey bazlama samples were high (88.60% and 79.20%, respectively), GI values of the bazlama samples enriched with 60% (64.73) and 45% barley flour (68.65) were medium. The lower GI values of barley flour-enriched bazlama samples are probably due to the higher β-glucan contents of the bazlama samples. Additionally, as the barley flour supplementation level of the bazlama samples increased, the phenolics and antioxidant capacities of free and bound extracts increased compared to bread wheat bazlama. The results indicated that hull-less barley (cv. Chifaa) with high β-glucan content may be utilized at relatively higher levels (45 and 60%) to produce bazlama with improved nutritional properties.

The Effect of Germination and Fermentation on the Physicochemical, Nutritional, and Functional Quality Attributes of Samh Seeds

This study investigated the effects of fermentation and germination on the physicochemical, nutritional, functional, and bioactive quality attributes of samh seeds. Regardless of the processing treatment, samh seeds were found to be a rich source of phenolic compounds, namely gallic acid (79.6-96.36 mg/100 g DW), catechol (56.34-77.34 mg/100 g DW), and catechin (49.15-84.93 mg/100 g DW), and they possessed high DPPH antiradical activity (65.27-78.39%). They also contained high protein content (19.29-20.41%), essential amino acids content (39.07-44.16% of total amino acids), and unsaturated fatty acid content (81.95-83.46% of total fatty acids) and a low glycemic index (39.61-41.43). Fermentation and germination increased L*, b*, foaming capacity, oil absorption capacity (OAC), water absorption capacity (WAC), swelling power, microbial counts, antioxidant activity, total flavonoid content (TFC), total phenolic content (TPC), in vitro protein digestibility, protein efficiency ratio, and total essential amino acids and reduced water solubility, emulsion stability, tannin, and phytate contents compared to raw samh seeds (p < 0.05). The highest levels of pH, ash, carbohydrate, fiber, and glycemic index were observed in raw samh seeds, and both germination and fermentation processes reduced these attributes to various degrees (p < 0.05). Germination increased the redness (a*), moisture content, essential and non-essential amino acids, potassium, zinc, phosphorous, stearic acid, and oleic and unsaturated fatty acids and reduced total solids, fat content, iron, zinc, calcium, magnesium, sodium, palmitic acid, and total saturated fatty acids of the samh seeds compared to the raw ones. Fermentation increased the total solid, acidity, fat, protein, calcium, magnesium, sodium, phosphorous, iron, zinc, palmitic acid, and total saturated fatty acids and reduced the a* value, moisture, non-essential amino acids, and total unsaturated fatty acids of the samh seeds compared to the raw ones. In conclusion, samh seeds are a rich source of nutrients that could generally be enhanced by germination and fermentation processes. The reported information facilitates strategies towards the application of these underutilized seeds in foods.

Gut microbiota-metabolic axis insight into the hyperlipidemic effect of lotus seed resistant starch in hyperlipidemic mice

We investigated the hyperlipidemic effect of different doses of lotus seed resistant starch (low-, medium and high-dose LRS, named as LLRS, MLRS and HLRS, respectively) in hyperlipidemic mice using gut microbiota-metabolic axis compared to high-fat diet mice (model control group, MC). Allobaculum was significantly decreased in LRS groups compared to MC group, while MLRS promoted the abundance of norank_f_Muribaculaceae and norank_f_Erysipelotrichaceae. Moreover, supplementation of LRS promoted cholic acid (CA) production and inhibited deoxycholic acid compared to MC group. Among, LLRS promoted formic acid, MLRS inhibited 20-Carboxy-leukotriene B4, while HLRS promoted 3, 4-Methyleneazelaic acid and inhibited Oleic acid and Malic acid. Finally, MLRS regulate microbiota composition, and this promoted cholesterol catabolism to form CA, which inhibited serum lipid index by gut microbiota-metabolic axis. In conclusion, MLRS can promote CA and inhibit medium chain fatty acids, so as to play the best role in lowering blood lipids in hyperlipidemia mice.

Factors Affecting the Nutritional, Health, and Technological Quality of Durum Wheat for Pasta-Making: A Systematic Literature Review

Durum wheat is one of the most important food sources in the world, playing a key role in human nutrition, as well as in the economy of the different countries in which its production areas are concentrated. Its grain also represents a staple and highly versatile ingredient in the development of health foods. Nonetheless, the aspects determining durum wheat's health quality and their interactions are many, complex, and not entirely known. Therefore, the present systematic literature review aims at advancing the understanding of the relationships among nutritional, health, and technological properties of durum wheat grain, semolina, and pasta, by evaluating the factors that, either positively or negatively, can affect the quality of the products. Scopus, Science Direct, and Web of Science databases were systematically searched utilising sets of keywords following the PRISMA guidelines, and the relevant results of the definitive 154 eligible studies were presented and discussed. Thus, the review identified the most promising strategies to improve durum wheat quality and highlighted the importance of adopting multidisciplinary approaches for such purposes.

Physical and culinary analysis of long gluten-free extruded pasta based on high protein quinoa flour

The consumption of foods with high protein content from pseudocereals is of great industrial interest. Pasta has a high gluten content; consequently, obtaining these gluten-free products is a technological challenge. The products obtained from quinoa show excellent results in protein and fiber with low glycemic index. This work focused on studying the effect of quinoa fat on the production of long pasta by extrusion in different mixtures of hyperprotein quinoa (HHP). It was observed that formulations with high percentages of starch showed a higher expansion rate, due to a higher fat content. Likewise, extruded pastes showed higher values of brightness than those containing lower percentages of starch and crude fat. The fracturability results were associated with the resistance of the paste to the pressure exerted for its deformation, which does not exceed 3.73 mm. The formulations with lower fat content presented high values in fracture stress due to the low diffusion of water and lipids. It was shown that fat has an indirect influence with a strong correlation with the expansion index and fracture stress and a moderate correlation (p &gt; 0.05) with Young's modulus, indicating that increasing the added fat content increases the percentage of mass loss by baking. The melting and cohesiveness of all components improved during extrusion due to the pregelatinization of cassava starch, the addition of defatted HHP and the availability of quinoa starch granules.

In vitro glycemic index, antioxidant capacity and some physicochemical characteristics of deep-fried sorghum based gluten free chips

In this study, deep fried gluten free chips were manufactured using sorghum flour at different concentrations (5, 20, 35 and 50 g/100 g) and in vitro glycemic index, total antioxidant capacity and some physicochemical characteristics (dry matter, ash, oil, protein and color) and overall acceptability of the samples were investigated. Protein, oil and total dietary fiber levels of the samples ranged between 5.39-8.28, 23.58-29.10 and 5.59-6.60 g/100 g, respectively and increase in sorghum flour level resulted in an increase in these studied quality parameters of the chips samples. Ferric reducing antioxidant activity and DPPH radical scavenging performance were affected positively by the addition of sorghum flour. Total starch hydrolysis index and estimated glycemic index values were affected by the sorghum flour addition negatively due to the increased total dietary fiber content of the chips samples. All chips samples enriched with sorghum flour showed similar overall acceptability and increased sorghum concentration decreased the preference scores slightly. All these results could be considered for the manufacturing of the gluten free deep fried sorghum based chips samples.

Effect of ultrasonicated lupin flour and resistant starch (type 4) on the physical and chemical properties of pasta

In this study, two different lupin flour obtained from debittered seeds by ultrasound application and traditional method (at 0-20% ratios), and resistant starch type 4 (RS4) (at 0-10% ratios) were used in pasta preparation to improve its nutritional quality. Experiments conducted at (2 × 4 × 3) × 2 factorial design. Use of ultrasonicated lupin flour in pasta revealed similar chemical, thermal and sensory properties to lupin flour debittered by traditional method. The replacement of semolina with lupin flour enhanced protein, dietary fiber and mineral content of pasta. Addition of lupin flour or RS4 increased cooking loss and firmness values of pasta. Pasta containing 20% lupin flour and 10% RS4 had higher gelatinization onset temperature values, and lower enthalpy than 100% semolina pasta. Use of RS4 in pasta reduced in vitro glycemic index without having any adverse effect on the sensory properties. The current findings indicate that it is possible to produce pasta with acceptable cooking quality and sensory properties and improved nutritional quality by adding 15% ultrasonicated lupin flour with 5-10% RS4.

3D printed extended release tablets for once daily use: An in vitro and in vivo evaluation study for a personalized solid dosage form

Fused deposition modeling (FDM)-3D printing enables the manufacturing of dosage forms with personalized doses and controllable release profiles. Parkinson's disease is a neurodegenerative disorder that causes motor complications. In the treatment of the disease, the nonergot dopamine receptor agonist pramipexole is used in gradually increasing doses depending on patient's needs. Hence, there are various dosed commercial products of pramipexole and it is a suitable model drug for the preparation of personalized-dose 3D printed dosage forms. In this study, we prepared extended release 3D tablets of pramipexole for once daily use in Parkinson's disease. Herein, 12 different 3D tablet formulations were prepared and in vitro characterizations were performed on these formulations. The formulations were compared with the marketed tablet and the optimum formulation was selected. The chosen formulation was prepared with commercially available doses of pramipexole and also with intermediate doses which are not available in the market to demonstrate the applicability of 3D printing in personalized dosing. Stability studies, which have innovative features for 3D tablets, were conducted in optimum 3D tablet formulation for 6 months at 25 °C/60% relative humidity (RH) and 40 °C/75% RH conditions. After oral administration of the optimum 3D tablets and the marketed tablets (in the same dose) to the rats, 24-hour plasma profiles were obtained and pharmacokinetic parameters were calculated. 3D tablets were successfully prepared in personalized doses and their properties were similar for almost all doses. The optimum 3D tablet formulation was found to be stable during the stability tests. 3D tablet and marketed tablet performed similar plasma profiles. The relative bioavailability of 3D tablet formulation was calculated as 107.6% compared with the marketed tablet. Briefly, in vitro and in vivo evaluations demonstrated that FDM-3D printing is a promising technology for the development of personalized dosage forms with extended release property and comparable to conventional ones.