New fluorinated aromatic poly(ether-amide)s derived from 2,2′-bis(3,4,5-trifluorophenyl)-4,4′-diaminodiphenyl ether and various dicarboxylic acids

Synthesis, optical and dielectric properties of polyacryloyloxy imino fluorophenyl acetamide and polyacryloyloxy imino fluorophenyl acetamide-co-polystyrene sulfonate

Our scope is synthesis a new poly fluorobenzamide oxime ester and study its structural, optical, and dielectric properties. Consequently, ((E)-2-((acryloyloxy)imino)-N-(4-fluorophenyl) acetamide) (AIFPA) was as-synthesized via a condensation reaction of (E)-N-(4-fluorophenyl)-2-(hydroxyimino) acetamide with acrylic acid to polymerize it via free radical polymerization (PAIFPA). over and above, the synthesized PAIFPA was inserted in more polymerization action with polystyrene sulfonate through the grafting process (PAIFPA-co-PSS). The chemical structures and morphology of AIFPA, PAIFPA, and PAIFPA-co-PSS were characterized by 1H NMR, FTIR, and XRD. The crystallinity index of PAIFPA, and PAIFPA-co-PSS was studied, affording that PAIFPA-co-PSS has the highest crystallinity. Moreover, The optical bandgap that obtained from absorbance analysis was encountered to be in the range of 2.6 eV to 3.5 eV. Ultimately, the dielectric properties of PAIFPA, and PAIFPA-co-PSS showed that electric conductivity values ranged from 6.12 × 10–8 to 7.11 × 10–7 S.cm−1, and 5.48 × 10–10 to 7.75 × 10–8 S.cm−1, respectively. It has a great deal of interest of PAIFPA-co-PSS which has wide band gap energy as short-wavelength light absorbers to be used in tandem polymer solar cells.

New fluorinated poly(pyridine amide)s derived from 2,6-bis(4-iodophenyl)-4-(4-trifluoromethylphenyl)pyridine by C–N coupling reaction

2,6-Bis(4-iodophenyl)-4-(4-trifluoromethylphenyl)pyridine, as a new aromatic diiodide compound, was synthesized through a one-pot protocol by the sequential diazotization-iodination of 2,6-bis(4-aminophenyl)-4-(4-trifluoromethylphenyl)pyridine with KI/NaNO2/ p-TsOH in acetonitrile at room temperature. A number of new aromatic fluorinated poly(pyridine amide)s containing 2,6-diphenyl-4-(4-trifluoromethylphenyl)pyridine units were prepared via a Pd(PPh3)2Cl2 catalyzed carbonylation polymerization of this diiodide, diamines and carbon monoxide in DMAc in the presence of PPh3 and 1,8-diazabicyclo[5,4,0]-7-undecene. These new polyamides with inherent viscosities of 0.63–0.72 dL/g were amorphous and easily soluble in amide type aprotic solvents such as NMP, DMAc, DMF and dimethyl sulfoxide at room temperature. Thermal analysis data up to 800°C in nitrogen showed their high thermal behavior with 5% weight loss temperature of 428–498°C and char yield of 62–69%. Their limiting oxygen index of 42.3–45.1 showed that the resulting poly(pyridine amide)s could be classified as “self-extinguishing polymers”. Also, their thin films exhibited high optical transparency with a cut-off wavelength of 324–373 nm.

High optical transparency, low dielectric constant, and light color of organosoluble polyamides based on 10,10-bis[4-(4- amino-3-trifluoromethylphenoxy)phenyl]- 9(10H)-anthrone

A new aromatic diamine, 10,10-bis[4-(4-amino-3-trifluoromethylphenoxy)phenyl]-9( 10H)-anthrone (BATFPA), has been synthesized from anthrone via three-step procedure. Low-temperature polycondensation of BATFPA with various aromatic dicarboxylic acid chlorides produced novel fluorinated polyamides with moderate to high inherent viscosities of 0.75–1.03 dL/g while the weight-average molecular weight and number-average molecular weight were in the range of 66,000–74,000 and 37,000–41,000, respectively. Nearly, all the polymers were readily soluble in polar solvents, such as N,N-dimethyl acetamide (DMAc), N-methyl-2-pyrrolidinone, pyridine, and tetrahydrofuran, and afforded transparent, light-colored, and flexible films upon casting from DMAc solvent. These polymers had glass transition temperatures of 249–309°C, 10% weight loss temperatures of 486–517°C, and char yields of 53–61% at 800°C under nitrogen. All polymers were amorphous and their films exhibited tensile strengths of 64–86 MPa, tensile moduli of 1.8–2.2 GPa, and elongation at break of 10–18%. These polymers had dielectric constants ranging from 3.25 to 3.76 (100 Hz), low moisture uptake in the range of 0.72–1.18%, and high transparency with an ultraviolet–visible absorption cutoff wavelength in the 360–378 nm range.

Umpolung cross-coupling of polyfluoroarenes with hydrazones via activation of C–F bonds

An umpolung strategy for the cross-coupling of polyfluoroarenes with various substituted hydrazones to construct C(sp²)–C(sp³) bonds is developed.

Preparation and properties of highly organosoluble polyimides derived from 2,2′-disubstituted-4,4′-oxydianilines

Four novel aromatic, symmetrical ether diamines (2,2′-bis(biphenyl)-4,4′-oxydianiline, 2,2′-bis[4′-(3″,4″,5″-trifluorophenyl)phenyl]-4,4′-oxydianiline, 2,2′-bis[4-(naphthalene-1-yl)phenyl]-4,4′-oxydianiline, and 2,2′-bis[4″-(diphenylamino)phenyl]-4,4′-oxydianiline), were successfully synthesized through four steps using p-chloronitrobenzene as a starting material. Highly organosoluble polyimides were obtained by the reaction of these diamines with 2′2 ′-bis[4′-(3″,4″,5″-trifluorophenyl)phenyl]-4,4′,5,5′-biphenyltetracarboxylic dianhydride via a conventional two-step chemical imidization method. All the polyimides were thoroughly characterized by Fourier transform infrared, ultraviolet, fluorescence, gel permeation chromatography, and thermogravimetric analysis. The effect of the fluorine atoms directly linked to the lateral phenyl rings showed excellent dissolution and strong fluorescence. The polyimides exhibited excellent thermal stability, with decomposition temperatures (at 10% weight loss) above 530°C and glass transition temperatures in the range of 258–320°C. These outstanding combined features ensured that these polyimides could be used as memory materials for advanced microelectronic applications.