Influence of high pressure homogenization (HPH) on the structural stability of an egg/dairy emulsion

Emulsifying properties of egg proteins: Influencing factors, modification techniques, and applications

As an essential food ingredient with good nutritional and functional properties and health benefits, eggs are widely utilized in food formulations. In particular, egg proteins have good emulsification properties and can be commonly used in various food products, such as mayonnaise and baked goods. Egg protein particles can act as stabilizers for Pickering emulsions because they can effectively adsorb at the oil-water interface, reduce interfacial tension, and form a stable physical barrier. Due to their emulsifying properties, biocompatibility, controlled release capabilities, and ability to protect bioactive substances, egg proteins have become ideal carriers for encapsulating and delivering functional substances. The focus of this review is to summarize current advances in using egg proteins as emulsifiers. The effects of influencing factors (temperature, pH, and ionic strength) and various modification methods (physical, chemical, and biological modification) on the emulsifying properties of egg proteins are discussed. In addition, the application of egg proteins as emulsifiers in food products is presented. Through in-depth research on the emulsifying properties of egg proteins, the optimization of their applications in food, biomedical, and other fields can be achieved.

Ultrasonic and homogenization: An overview of the preparation of an edible protein-polysaccharide complex emulsion

Emulsion systems are extensively utilized in the food industry, including dairy products, such as ice cream and salad dressing, as well as meat products, beverages, sauces, and mayonnaise. Meanwhile, diverse advanced technologies have been developed for emulsion preparation. Compared with other techniques, high-intensity ultrasound (HIUS) and high-pressure homogenization (HPH) are two emerging emulsification methods that are cost-effective, green, and environmentally friendly and have gained significant attention. HIUS-induced acoustic cavitation helps in efficiently disrupting the oil droplets, which effectively produces a stable emulsion. HPH-induced shear stress, turbulence, and cavitation lead to droplet disruption, altering protein structure and functional aspects of food. The key distinctions among emulsification devices are covered in this review, as are the mechanisms of the HIUS and HPH emulsification processes. Furthermore, the preparation of emulsions including natural polymers (e.g., proteins-polysaccharides, and their complexes), has also been discussed in this review. Moreover, the review put forward to the future HIUS and HPH emulsification trends and challenges. HIUS and HPH can prepare much emulsifier-stable food emulsions, (e.g., proteins, polysaccharides, and protein-polysaccharide complexes). Appropriate HIUS and HPH treatment can improve emulsions' rheological and emulsifying properties and reduce the emulsions droplets' size. HIUS and HPH are suitable methods for developing protein-polysaccharide forming stable emulsions. Despite the numerous studies conducted on ultrasonic and homogenization-induced emulsifying properties available in recent literature, this review specifically focuses on summarizing the significant progress made in utilizing biopolymer-based protein-polysaccharide complex particles, which can provide valuable insights for designing new, sustainable, clean-label, and improved eco-friendly colloidal systems for food emulsion. PRACTICAL APPLICATION: Utilizing complex particle-stabilized emulsions is a promising approach towards developing safer, healthier, and more sustainable food products that meet legal requirements and industrial standards. Moreover, the is an increasing need of concentrated emulsions stabilized by biopolymer complex particles, which have been increasingly recognized for their potential health benefits in protecting against lifestyle-related diseases by the scientific community, industries, and consumers.

Effect of reverse osmosis and ultra-high-pressure homogenization on the composition and microstructure of sweet buttermilk

Buttermilk (BM), the by-product of butter making, is similar to skim milk (SM) composition. However, it is currently undervalued in dairy processing because it is responsible for texture defects (e.g., crumbliness, decreased firmness) in cheese and yogurt. One possible way of improving the incorporation of BM into dairy products is by the use of technological pretreatments such as membrane filtration and homogenization. The study aimed at characterizing the effect of preconcentration by reverse osmosis (RO) and single-pass ultra-high-pressure homogenization (UHPH) on the composition and microstructure of sweet BM to modify its techno-functional properties (e.g., protein gel formation, syneresis, firmness). The BM and RO BM were treated at 0, 15, 150, and 300 MPa. Pressure-treated and control BM and RO BM were ultracentrifuged to fractionate them into the following 3 fractions: a supernatant soluble fraction (top layer), a colloidal fraction consisting of a cloudy layer (middle layer), and a high-density pellet (bottom layer). Compositional changes in the soluble fraction [lipid, phospholipid (PL), protein, and salt], as well as its protein profile by PAGE analysis, were determined. Modifications in particle size distribution upon UHPH were monitored by laser diffraction in the presence and absence of sodium citrate to dissociate the casein (CN) micelles. Microstructural changes in pressure-treated and non-pressure-treated BM and RO BM particles were monitored by confocal laser scanning microscopy. Particle size analysis showed that UHPH treatment significantly decreased the size of the milk fat globule membrane fragments in BM and RO BM. Also, pressure treatment at 300 MPa led to a significant increase in the recovery of total lipids, CN, calcium, and phosphate in the BM soluble fraction (top layer) following ultracentrifugation. However, PL were primarily concentrated in the pellet cloud (middle layer), located above the pellet in BM concentrated by RO. In contrast, PL were evenly distributed between soluble and colloidal phases of BM. This study provides insight into the modifications of sweet BM constituents induced by RO and UHPH from a compositional and structural perspective.

Effects of Glucose and Homogenization Treatment on the Quality of Liquid Whole Eggs

To investigate the effect of glucose on the protein structure, physicochemical and processing properties of liquid whole eggs (LWE) under homogenization, different concentrations of glucose (0.01, 0.02, 0.04, 0.08 g/mL) were added into LWE, followed by homogenizing at different pressures (5, 10, 20, 40 MPa), respectively. It was shown that the particle size and turbidity of LWE increased with the increase in glucose concentration while decreasing with the increase in homogenization pressure. The protein unfolding was increased at a low concentration of glucose combined with homogenization, indicating a 40.33 ± 5.57% and 165.72 ± 33.57% increase in the fluorescence intensity and surface hydrophobicity under the condition of 0.02 g/mL glucose at 20 MPa, respectively. Moreover, the remarkable increments in foaming capacity, emulsifying capacity, and gel hardness of 47.57 ± 5.1%, 66.79 ± 9.55%, and 52.11 ± 9.83% were recorded under the condition of 0.02 g/mL glucose at 20 MPa, 0.04 g/mL glucose at 20 MPa, and 0.02 g/mL glucose at 40 MPa, respectively. Reasonably, glucose could improve the processing properties of LWE under homogenization, and 0.02 g/mL-0.04 g/mL and 20-40 MPa were the optimal glucose concentration and homogenization pressure. This study could contribute to the production of high-performance and stable quality of LWE.

Impact of Ultra-High Pressure Homogenization on the Structural Properties of Egg Yolk Granule

Ultra-high pressure homogenization (UHPH) is a promising method for destabilizing and potentially improving the techno-functionality of the egg yolk granule. This study’s objectives were to determine the impact of pressure level (50, 175 and 300 MPa) and number of passes (1 and 4) on the physico-chemical and structural properties of egg yolk granule and its subsequent fractions. UHPH induced restructuration of the granule through the formation of a large protein network, without impacting the proximate composition and protein profile in a single pass of up to 300 MPa. In addition, UHPH reduced the particle size distribution up to 175 MPa, to eventually form larger particles through enhanced protein–protein interactions at 300 MPa. Phosvitin, apovitellenin and apolipoprotein-B were specifically involved in these interactions. Overall, egg yolk granule remains highly stable during UHPH treatment. However, more investigations are needed to characterize the resulting protein network and to evaluate the techno-functional properties of UHPH-treated granule.

In vivo β-carotene skin permeation modulated by Nanostructured Lipid Carriers

Nanostructured Lipid Carriers (NLC) were investigated with the purpose of promoting skin permeation of the highly lipophilic β-carotene (BC) across the stratum corneum (SC) barrier so that it may perform its antioxidant properties in photo-aging and epithelial skin cancer prevention. Two differently sized NLC samples were developed using stearic acid and squalene as lipid matrix and evaluated in comparison with Microstructured Lipid Carriers (MLC). The carriers were characterized for morphology, size, Z-potential, BC loading and release as well as physical state by means of DSC and XRPD analyses. In vivo penetration of the carriers was assessed on humans by determining BC concentrations within the SC stratum disjunctum and stratum compactum layers removed by means of the tape stripping test in comparison with pure BC. Unlike MLC and pure BC that were mostly retained within the outermost layers of the SC, the NLC sample having the smallest size (about 200 nm) has proved to penetrate more deeply into the SC barrier. Accordingly, the goal of providing β-carotene actions against oxidative damages within the looser skin viable tissues could be envisaged.

Impact of high-pressure homogenization on the microstructure and rheological properties of citrus fiber

Citrus fiber dispersion with different concentrations (5–25 g/kg) was treated by high-pressure homogenization (90 and 160 MPa) for two cycles. The particle size distribution, hydration properties of powders, morphology and rheological measurements were carried out to study the microstructure and rheological properties changes by high-pressure homogenization (HPH). In conclusion, the HPH can reduce the particle size of fiber, improve the water holding capacity and water binding capacity. Furthermore, fiber shape can be modified from globular cluster to flake-like slices, and tiny pores can be formed on the surface of citrus fiber. The apparent viscosity, storage modulus and loss modulus were increased by HPH whereas the activation energy was reduced. The Hershcel–Bulkley model, Carreau model and Power Law mode were selected to evaluate the rheological properties.

Effect of homogenizer pressure and temperature on physicochemical, oxidative stability, viscosity, droplet size, and sensory properties of Sesame vegetable cream

In this study, the effects of homogenization pressure (125, 145, and 165 bars) and temperature (45, 60, and 75°C) on the properties of Sesame vegetable cream are investigated. The physical stability of cream was characterized by droplet size and syneresis, and chemical stability of it was evaluated by determining peroxide value and p-anisidine. The results showed that the cream in the presence of high pressure and temperature treatment exhibits lower stability. At 75°C temperature and 165 bar, the vegetable cream had highest peroxide value (3.61) and p-anisidine (2.16). However, pressure could protect the droplets against aggregation in the high pressure (165 bar) and greatly increased the physical stability. During increase in process parameters, the syneresis of cream was decreased with a rise of pressure and extension of temperature. The process condition in 145 bar and 60°C led to the high acceptability of vegetable cream.