Removal of pesticide residue in cherry tomato by hydrostatic pressure

Role of Lactic Acid Bacteria in Insecticide Residue Degradation

Lactic acid bacteria are gaining global attention, especially due to their role as a probiotic. They are increasingly being used as a flavoring agent and food preservative. Besides their role in food processing, lactic acid bacteria also have a significant role in degrading insecticide residues in the environment. This review paper highlights the importance of lactic acid bacteria in degrading insecticide residues of various types, such as organochlorines, organophosphorus, synthetic pyrethroids, neonicotinoids, and diamides. The paper discusses the mechanisms employed by lactic acid bacteria to degrade these insecticides, as well as their potential applications in bioremediation. The key enzymes produced by lactic acid bacteria, such as phosphatase and esterase, play a vital role in breaking down insecticide molecules. Furthermore, the paper discusses the challenges and future directions in this field. However, more research is needed to optimize the utilization of lactic acid bacteria in insecticide residue degradation and to develop practical strategies for their implementation in real-world scenarios.

Pesticide Use and Degradation Strategies: Food Safety, Challenges and Perspectives

While recognizing the gaps in pesticide regulations that impact consumer safety, public health concerns associated with pesticide contamination of foods are pointed out. The strategies and research directions proposed to prevent and/or reduce pesticide adverse effects on human health and the environment are discussed. Special attention is paid to organophosphate pesticides, as widely applied insecticides in agriculture, veterinary practices, and urban areas. Biotic and abiotic strategies for organophosphate pesticide degradation are discussed from a food safety perspective, indicating associated challenges and potential for further improvements. As food systems are endangered globally by unprecedented challenges, there is an urgent need to globally harmonize pesticide regulations and improve methodologies in the area of food safety to protect human health.

Research trends and emerging physical processing technologies in mitigation of pesticide residues on various food products

The application of pesticides enhances food production vastly, and it cannot be prevented; longer fresh produce is contaminated with health-threatening pesticides even though traditional processing methods can remove these pesticides from food surfaces to a certain extent; novel emerging technologies such as cold plasma, ultrasound, electrolyzed water, and pulsed electric field could more effectively dissipate the pesticide content in food without the release of toxic residual on the food surface. The present review focuses on applying emerging technologies to degrade pesticide residues in great utility in the food processing industries. This review also discusses the pesticide removal efficacy and its mechanism involved in these technologies. The oxidation principle in cold plasma is recently gaining more importance for the degradation of pesticide residue in the food processing industries. Analysis of the emerging physical processing methods indicated greater efficacy in eradicating pesticide residues during agriculture processing. Even though the technologies such as EO (99% reduction in dimethoate), ultrasound (98.96% for chlorpyrifos), and irradiation (99.8% for pesticide in aqueous solution) can achieve promising results in pesticide degradation level, the rate and inactivation highly depend on the type of equipment and processing parameters involved in different techniques, surface characteristics of produce, treatment conditions, and nature of the pesticide. Therefore, to effectively remove these health-threatening pesticides from food surfaces, it is necessary to know the process parameters and efficacy of the applied technology on various pesticides.

Plant growth promoting potential of butyl isobutyl phthalate and Streptomyces sp. from Rumex dentatus on rice

Rice (Oryza sativa L.) is one of the most important staple foods consumed in many countries of the world. It is mostly consumed in developing countries where different chemical fertilizers are used to improve the productivity of the crop plant. In the present study, endophytic actinomycetes isolated from Rumex dentatus were identified morphologically and by scanning electron microscopy. Butyl isobutyl phthalate (BIBP) was isolated from the root endophyte Streptomyces sp. JR9 using column chromatography and HPLC methods. The compound was tested for its effect on rice seed germination. BIBP, extracts, and isolates were evaluated for their plant growth effect on rice in a growth chamber. Isolates were also screened in vitro for phosphate solubilization activity and enzyme production. Indole-3-acetic acid (IAA) and BIBP produced in extracts were quantified and detected using high performance liquid chromatography (HPLC) and liquid chromatography-mass spectrometry (LC-MS) methods, respectively. BIBP was found to increase the germination of rice seeds by 6 to 12% in treated samples and displayed potent effect at lowest concentration (0.437 µM). Both the compound and the extract depicted significant increases in almost all growth parameters at lowest concentration of 0.125 µg/mL and 62.5 µg/mL, respectively. BIBP also increased significantly shoot length, fresh root, fresh shoot, and dried shoot weight at high concentrations and was more potent than the standard phytohormone IAA. HPLC quantification showed 7.952 µg/mg and 0.371 µg/mg of IAA in extracts of Streptomyces sp. JR9 and the stem endophyte Streptomyces sp. KS3, respectively. IAA containing extract of JR9 increased significantly most growth parameters at lowest concentration (125 µg/mL). The extract of KS3 depicted significant increases in almost all growth parameters at high concentration (500 µg/mL). Our investigation showed that streptomycetes isolated from R. dentatus and BIBP are potent growth promoting agents and can be used in agriculture as bio-fertilizer to improve the growth and productivity of rice. KEY POINTS: • Butyl isobutyl phthalate (BIBP) isolated from endophytic Streptomyces sp. JR9 is a potent rice seed germination activator and promotes significantly the growth of rice • Isolated endophytes showed the ability to produce enzymes and phytohormone IAA • Isolates enhanced significantly the growth of rice.

High Pressure Processing Impact on Emerging Mycotoxins (ENNA, ENNA1, ENNB, ENNB1) Mitigation in Different Juice and Juice-Milk Matrices

The aim of the present study was to investigate the potential of high-pressure processing (HPP) (600 MPa during 5 min) on emerging mycotoxins, enniatin A (ENNA), enniatin A1 (ENNA1), enniatin B (ENNB), enniatin B1 (ENNB1) reduction in different juice/milk models, and to compare it with the effect of a traditional thermal treatment (HT) (90 °C during 21 s). For this purpose, different juice models (orange juice, orange juice/milk beverage, strawberry juice, strawberry juice/milk beverage, grape juice and grape juice/milk beverage) were prepared and spiked individually with ENNA, ENNA1, ENNB and ENNB1 at a concentration of 100 µg/L. After HPP and HT treatments, ENNs were extracted from treated samples and controls employing dispersive liquid-liquid microextraction methodology (DLLME) and determined by liquid chromatography coupled to ion-trap tandem mass spectrometry (HPLC-MS/MS-IT). The results obtained revealed higher reduction percentages (11% to 75.4%) when the samples were treated under HPP technology. Thermal treatment allowed reduction percentages varying from 2.6% to 24.3%, at best, being ENNA1 the only enniatin that was reduced in all juice models. In general, no significant differences (p > 0.05) were observed when the reductions obtained for each enniatin were evaluated according to the kind of juice model, so no matrix effects were observed for most cases. HPP technology can constitute an effective tool in mycotoxins removal from juices.

High Pressure Processing Impact on Alternariol and Aflatoxins of Grape Juice and Fruit Juice-Milk Based Beverages

High-pressure processing (HPP) has emerged over the last 2 decades as a good alternative to traditional thermal treatment for food safety and shelf-life extension, supplying foods with similar characteristics to those of fresh products. Currently, HPP has also been proposed as a useful tool to reduce food contaminants, such as pesticides and mycotoxins. The aim of the present study is to explore the effect of HPP technology at 600 MPa during 5 min at room temperature on alternariol (AOH) and aflatoxin B1 (AFB1) mycotoxins reduction in different juice models. The effect of HPP has also been compared with a thermal treatment performed at 90 °C during 21 s. For this, different juice models, orange juice/milk beverage, strawberry juice/milk beverage and grape juice, were prepared and spiked individually with AOH and AFB1 at a concentration of 100 µg/L. After HPP and thermal treatments, mycotoxins were extracted from treated samples and controls by dispersive liquid–liquid microextraction (DLLME) and determined by HPLC-MS/MS-IT. The results obtained revealed reduction percentages up to 24% for AFB1 and 37% for AOH. Comparing between different juice models, significant differences were observed for AFB1 residues in orange juice/milk versus strawberry juice/milk beverages after HPP treatment. Moreover, HPP resulted as more effective than thermal treatment, being an effective tool to incorporate to food industry in order to reach mycotoxins reductions.

Aspects of high hydrostatic pressure food processing: Perspectives on technology and food safety

The last two decades saw a steady increase of high hydrostatic pressure (HHP) used for treatment of foods. Although the science of biomaterials exposed to high pressure started more than a century ago, there still seem to be a number of unanswered questions regarding safety of foods processed using HHP. This review gives an overview on historical development and fundamental aspects of HHP, as well as on potential risks associated with HHP food applications based on available literature. Beside the combination of pressure and temperature, as major factors impacting inactivation of vegetative bacterial cells, bacterial endospores, viruses, and parasites, factors, such as food matrix, water content, presence of dissolved substances, and pH value, also have significant influence on their inactivation by pressure. As a result, pressure treatment of foods should be considered for specific food groups and in accordance with their specific chemical and physical properties. The pressure necessary for inactivation of viruses is in many instances slightly lower than that for vegetative bacterial cells; however, data for food relevant human virus types are missing due to the lack of methods for determining their infectivity. Parasites can be inactivated by comparatively lower pressure than vegetative bacterial cells. The degrees to which chemical reactions progress under pressure treatments are different to those of conventional thermal processes, for example, HHP leads to lower amounts of acrylamide and furan. Additionally, the formation of new unknown or unexpected substances has not yet been observed. To date, no safety-relevant chemical changes have been described for foods treated by HHP. Based on existing sensitization to non-HHP-treated food, the allergenic potential of HHP-treated food is more likely to be equivalent to untreated food. Initial findings on changes in packaging materials under HHP have not yet been adequately supported by scientific data.

Effects of electrolyzed water treatment on pesticide removal and texture quality in fresh-cut cabbage, broccoli, and color pepper

The effects of alkaline and acidic electrolyzed water (AlEW, AcEW) treatment on the removal of pesticides (phorate, chlorpyrifos, lambda-cyhalothrin, cyfluthrin, procymidone, and chlorothalonil) and texture quality of fresh-cut cabbage, broccoli, and color pepper were investigated. AlEW efficiently removed pesticides from color pepper, whereas AcEW was the optimal treatment for pesticide removal from cabbage and broccoli. AcEW resulted in greater losses of pyrethroid and organophosphates than fungicides, while AlEW was superior for removing fungicides. The best pesticide removal from cabbage (72.28%-91.04%) was achieved by continuous oscillation treatment, while intermittent oscillation for 20 min achieved optimal results for broccoli and color pepper (72.28%-90.11% and 72.24%-88.12%, respectively). No significant deterioration in texture was detected in samples treated with electrolyzed water for 5-25 min. The results suggest that electrolyzed water treatment is effective for removing organophosphate, pyrethroid, and fungicide residues from fresh-cut vegetables while not negatively affecting their texture quality.

Non-thermal technologies: Solution for hazardous pesticides reduction in fruits and vegetables

Pesticide residues in the food above the maximum permissible residual limit (MRL) for safe consumption are a severe concern today. Though unit operations employed in domestic and industrial-scale processing of foods such as high-temperature decontamination and chemical washings degrade the agrochemicals and reduce toxicity, eliminating pesticides from the fresh and raw fruits and vegetables with the retainment of nutritional and organoleptic attributes demand appropriate non-thermal technologies. In this review, the potential of novel technologies like the pulsed electric field, high-pressure processing, irradiation, ozone, ultrasonication, and cold plasma for the reduction of pesticides in fruits and vegetables have been discussed in terms of their mechanism of action, playing around factors, advantages, and limitations. All the reviewed non-thermal technologies exhibited promising effects on pesticide degradation with their unique mechanism of action. Also, these techniques' potential to reduce the pesticides below MRLs and yield nontoxic metabolites in fruits and vegetables were analyzed. However, investigating the impact of the technologies on the nutritional and organoleptic quality profile of the commodities at the processing conditions causing noticeable pesticide reduction and the pathways of degradation reactions of various pesticides with each emerging technology should be studied to enhance the applicability.

Application of non-thermal pretreatment techniques on agricultural products prior to drying: a review

BACKGROUND

Most agricultural crops contain high moisture content (80-95% wet basis (wb)) which makes them very susceptible to microbial damage leading to shorter shelf-life and high postharvest losses. The high perishability of these agricultural products requires preservation techniques to prolong their shelf-lives. Drying remains an important component of processing in this regard. Therefore, any pretreatment methods for drying agricultural product that decreases the moisture content and minimizes drying time by conserving the quality of the crop product is of prime significance. This article is a comprehensive review of recent developments of non-thermal pretreatment (NTP) methods. A summary of their significance, emerging and innovative methods of this technology together with its applications and limitations are discussed. This article further examines the environmental impact of NTP techniques.

RESULTS

NTP techniques, such as high pressure, ultrasound, pulsed electric field and osmotic dehydration methods are essential operations for pre-dehydration of agricultural products prior to drying. These techniques can avoid the deleterious effects of heat on nutritive value, colour and flavour of agricultural products compared to thermal pretreatments. They also enhance the inactivation of the enzymes, improve energy efficiency and mass transfer, reduce processing time, preserve bioactive compounds, improve drying kinetics and drying rate, minimize enzymatic browning, and enhance product quality.

CONCLUSION

These findings will provide a better understanding of different NTP methods and also make available more information for selecting pretreatment techniques for drying of agricultural products. © 2020 Society of Chemical Industry.

Effective Subcritical Butane Extraction of Bifenthrin Residue in Black Tea

As a natural and healthy beverage, tea is widely enjoyed; however, the pesticide residues in tea leaves affect the quality and food safety. To develop a highly selective and efficient method for the facile removal of pesticide residues, the subcritical butane extraction (SBE) technique was employed, and three variables involving temperature, time and extraction cycles were studied. The optimum SBE conditions were found to be as follows: extraction temperature 45 °C, extraction time 30 min, number of extraction cycles 1, and in such a condition that the extraction efficiency reached as high as 92%. Further, the catechins, theanine, caffeine and aroma components, which determine the quality of the tea, fluctuated after SBE treatment. Compared with the uncrushed leaves, pesticide residues can more easily be removed from crushed leaves, and the practical extraction efficiency was 97%. These results indicate that SBE is a useful method to efficiently remove the bifenthrin, and as appearance is not relevant in the production process, tea leaves should first be crushed and then extracted in order that residual pesticides are thoroughly removed.

In-package nonthermal plasma degradation of pesticides on fresh produce

In-package nonthermal plasma (NTP) technology is a novel technology for the decontamination of foods and biological materials. This study presents the first report on the potential of the technology for the degradation of pesticide residues on fresh produce. A cocktail of pesticides, namely azoxystrobin, cyprodinil, fludioxonil and pyriproxyfen was tested on strawberries. The concentrations of these pesticides were monitored in priori and post-plasma treatment using GC-MS/MS. An applied voltage and time dependent degradation of the pesticides was observed for treatment voltages of 60, 70 and 80 kV and treatment durations ranging from 1 to 5 min, followed by 24h in-pack storage. The electrical characterisation revealed the operation of the discharge in a stable filamentary regime. The discharge was found to generate reactive oxygen and excited nitrogen species as observed by optical emission spectroscopy.