Effect of dextrose equivalent of maltodextrin on the stability of emulsified coconut-oil in spray-dried powder

Exploring the Equilibrium State Diagram of Maltodextrins across Diverse Dextrose Equivalents

This study investigates the equilibrium state diagram of maltodextrins with varying dextrose equivalents (DE 10 and 30) for quercetin microencapsulation. Using XRD, SEM, and optical microscopy, three transition regions were identified: amorphous (aw 0.07-0.437), semicrystalline (aw 0.437-0.739), and crystalline (aw > 0.739). In the amorphous region, microparticles exhibit a spherical morphology and a fluffy, pale-yellow appearance, with Tg values ranging from 44 to -7 °C. The semicrystalline region shows low-intensity diffraction peaks, merged spherical particles, and agglomerated, intense yellow appearance, with Tg values below 2 °C. The crystalline region is characterized by fully collapsed microstructures and a continuous, solid material with intense yellow color. Optimal storage conditions are within the amorphous region at 25 °C, aw 0.437, and a water content of 1.98 g H2O per g of dry powder. Strict moisture control is required at higher storage temperatures (up to 50 °C) to prevent microstructural changes. This research enhances understanding of maltodextrin behavior across diverse dextrose equivalents, aiding the development of stable microencapsulated products.

Effect of wall material on lipophilic functional compounds of high oleic palm oil emulsions encapsulated by Refractance Window drying

High-oleic palm oil is a food-grade oil with desirable properties, as it is characterised by having an oleic acid concentration above 50 % and a high vitamin E and provitamin A content. This study investigated the effect of different combinations of two wall materials (whey protein (WP) and Capsul®, a commercial octenyl succinic anhydride modified starch (OSA-MS)) on the concentration of provitamin A, vitamin E and oleic acid, and the physical properties of high oleic palm oil emulsions encapsulated by Refractance Window drying technology. Wall material composition significantly affected (p < 0.05) all response variables, and R2 values were above 0.75 for all responses. Phytonutrient preservation showed its highest at an OSA-MS: WP concentration ratio of 1: 3. Optimal results were achieved (minimum moisture content, water activity and hygroscopicity, and maximum encapsulation efficiency and phytonutrient preservation) at an OSA-MS concentration of 8.13 % and WP concentration of 91.87 %. Flakes were obtained as a solid structure that protects oil's phytonutrients with 94 %, 75 % and 87 % of preservation of oleic acid, vitamin E and carotenoids, respectively. It shows that the wall material combination and encapsulation technique are suitable for obtaining lipophilic functional compounds.

Effect of Dextrose Equivalent on Maltodextrin/Whey Protein Spray-Dried Powder Microcapsules and Dynamic Release of Loaded Flavor during Storage and Powder Rehydration

The preparation of powdered microcapsules of flavor substances should not only protect these substances from volatilization during storage but also improve their diffusion during use. This study aimed to investigate the effects of maltodextrin (MD) with different dextrose equivalent (DE) values on retention of flavor substances during storage, and the dynamic release of flavor substances during dissolution. MDs with three different DE values and whey protein isolate were mixed in a ratio of 4:1 as wall materials to encapsulate ethyl acetate, and powdered microcapsules were prepared by spray drying. It was proved that MD could reduce the diffusion of flavor substances under different relative humidity conditions through the interaction between core material and wall material. During dissolution, MD released flavor substances quickly owing to its superior solubility. The reconstituted emulsion formed after the powder dissolved in water recaptured flavor substances and made the system reach equilibrium. This study explored the mechanism of flavor release during the storage and dissolution of powder microcapsules and should help us understand the application of powder microcapsules in food systems.

Whey protein and maltodextrin-stabilized oil-in-water emulsions: Effects of dextrose equivalent

The aim of this work is to evaluate the effect of dextrose equivalent (DE) of maltodextrins (MD) on the stability of whey protein and maltodextrin stabilized oil-in-water (o/w) emulsions. Emulsions with DE 15 maltodextrin (MD 15) exhibited better stability under light acidic (pH 6), neutral and alkaline (pH 8-9) conditions, as well as during temperature ramps (20-60 °C). After 15-days of storage, MD 15 emulsion showed increase in polydispersity and decrease in the average droplet size. The apparent viscosity of the emulsions decreased with increasing DE. The shear stresses of all emulsions fitted well with the power law model (R² > 0.9), while MD 15 showed the most stable k and n indexes. The brightness and whiteness of emulsion decreased with increases in DE. In conclusion, emulsions with MD 15 exhibited better stability, which suggests their good potential for use in the preparation of energy drinks.