Preparation and characterization of phytosterol-loaded microcapsules based on the complex coacervation

Synthesis and characterization of ion-induced sodium alginate/soy protein isolate microgels for the controlled release

In this study, sodium alginate/ soy protein isolate (SPI) microgels cross-linked by various divalent cations including Cu2+, Ba2+, Ca2+, and Zn2+ were fabricated. Cryo-scanning electron microscopy observations revealed distinctive structural variations among the microgels. In the context of gastric pH conditions, the degree of shrinkage of the microgels followed the sequence of Ca2+ > Ba2+ > Cu2+ > Zn2+. Meanwhile, under intestinal pH conditions, the degree of swelling was ranked as Zn2+ > Ca2+ > Ba2+ > Cu2+. The impact of these variations was investigated through in vitro digestion studies, revealing that all microgels successfully delayed the release of β-carotene within the stomach. Within the simulated intestinal fluid, the microgel cross-linked with Zn2+ exhibited an initial burst release, while those cross-linked with Cu2+, Ba2+, or Ca2+ displayed a sustained release pattern. This research underscores the potential of sodium alginate/SPI microgels cross-linked with different divalent cations as efficient controlled-release delivery systems.

Efficacy of almond gum for coacervation with whey protein isolate- optimization, functionality and characterization: A comparison with high-methoxyl pectin

Complex coacervates of whey protein isolate (WPI) and two polysaccharides (almond gum (AG) and high methoxyl pectin (HMP)) under the different pHs (2.5-6.0) and biopolymer mass ratios (1:1-6:1) were prepared to achieve the maximum coacervate yield (CY). The optimum pH and mixing ratio to obtain the maximum CY of WPI-AG (75.93 %) and WPI-HMP (53.0 %) coacervates were 4.3 and 2:1, and 3.5 and 3:1, respectively. Although higher serum layers in emulsions stabilized by WPI-AG/HMP coacervates were detected at the 90 °C, remarkable heat stability under processing temperatures was obtained in ex-situ emulsions with both complex coacervates. Significantly more cold-storage and ionic stabilities were observed for emulsions formulated with WPI-AG than WPI-HMP. Peak shifts in FTIR spectra in the WPI-AG coacervate compared to the individual WPI and AG biopolymers revealed strong electrostatic interactions between these biopolymers. The absence of crystalline peaks for AG and HMP in X-ray diffraction (XRD) spectra confirmed the complexation of AG and HMP with WPI. Thermogravimetric and microstructural analyses showed that porous, loose mesh-like WPI-AG coacervates had superior thermal stability and structural integrity compared to WPI-HMP coacervates and individual biopolymers, which evidenced a more gradual weight loss pattern. WPI-AG coacervates would be promising for efficient emulsion-based delivery systems.

New perspective on protein-based microcapsules as delivery vehicles for sensitive substances: A review

Sensitive substances have attracted wide attention due to their rich functional activities, such as antibiosis activities, antioxidant activities and prevent disease, etc. However, the low stability of sensitive substances limits their bioavailability and functional activities. Protein-based microcapsules can encapsulate sensitive substances to improve their adverse properties due to their good stability, strong emulsifying ability and wide source. Therefore, it is necessary to fully elaborate and summarize protein-based microcapsules to maximize their potential benefits in nutritional interventions. The focus of this review is to highlight the classification of protein-based microcapsules. In addition, the principles, advantages and disadvantages of preparation methods for protein-based microcapsules are summarized. Some novel preparation methods for protein-based microcapsules are also emphasized. Moreover, the mechanism of protein-based microcapsules that release sensitive substances in vitro is elucidated and summarized. Furthermore, the applications of protein-based microcapsules are outlined. Protein-based microcapsules can effectively encapsulate sensitive substances, which improve their bioavailability, and provide protective effects during storage and gastrointestinal digestion. In addition, microcapsules can improve the sensory quality of food and enhance its stability. The performance of protein-based microcapsules for delivering sensitive substances is influenced by factors such as protein type, the ratio between protein ratio and the other wall material, the preparation process, etc. Future research should focus on the new composite protein-based microcapsule delivery system, which can be applied to in vivo research and have synergistic effects and precise nutritional functions. In summary, protein-based microcapsules have broader research prospects in the functional foods and nutrition field.

Chitosan-coated soybean protein isolate/lecithin nanoparticles for enhancing the stability and bioaccessibility of phytosterol

BACKGROUND

Phytosterols (PS) have various beneficial effects on human health, especially the property of reducing blood cholesterol. However, the low solubility and bioaccessibility of PS have greatly limited their application in functional food ingredients.

RESULTS

To improve the bioaccessibility and stability of PS, chitosan-coated PS nanoparticles (CS-PNP) were successfully prepared by self-assembly. The properties of CS-PNP, including size, zeta potential, encapsulation efficiency (EE) and loading amount (LA) were characterised. The optimisation of CS concentration (0.4 mg mL-1) and pH (3.5) resulted in the formation of CS-PNP with an EE of over 90% and a particle size of 187.7 nm. Due to the special properties of CS chitosan, the interaction between CS and soybean protein isolate (SPI)/lecithin (SL) led to the formation of a soluble complex. CS-PNP exhibited good stability to temperature variations but was more sensitive to salt ions. During in vitro digestion, CS efficiently maintained the stability of nanoparticles against the hydrolysis of SPI by pepsin under acidic conditions. However, these nanoparticles tended to aggregate in a neutral intestinal environment. After 3 h of in vitro digestion, the bioaccessibility of PS increased from 18.2% of free PS to 63.5% of CS-PNP.

CONCLUSION

Overall, these results highlight the potential of chitosan-coated nanoparticles as effective carriers for the oral administration of PS. This multilayer construction may serve as a promising for applications in food products as delivery vehicles for nutraceuticals. © 2024 Society of Chemical Industry.

Current and New Insights on Delivery Systems for Plant Sterols in Food

Plant sterols are minor bioactive components of food lipids, which are often used for the formulation of functional foods due to their cholesterol-lowering properties. However, they have low solubility and tend to crystallize, which may affect their biological effects, the sensory profile of the sterol-enriched food, and its consumer acceptability. Moreover, due to the unsaturated structure of sterols, they are susceptible to oxidation, so different encapsulation systems have been developed to improve their dispersibility/solubility, stability, delivery, and bioaccessibility. This chapter provides an overview of the main encapsulation systems currently used for plant sterols and their application in model and food systems, with a particular focus on their efficiency and impact on sterol bioaccessibility.

Microencapsulation of green coffee oil by complex coacervation of soy protein isolate, sodium casinate and polysaccharides: Physicochemical properties, structural characterisation, and oxidation stability

This study developed a combination method between protein-polysaccharide complex coacervation and freezing drying for the preparation of green coffee oil (GCO) encapsulated powders. Different combinations of soy protein isolate, sodium caseinate, sodium carboxymethylcellulose, and sodium alginate were utilised as wall materials. The occurrence of complexation between the biopolymers were compared to the final emulsion of the individual protein and confirmed by fourier transform infrared spectrometry and X-ray diffraction. The mean diameter and estimated PDI of GCO microcapsules were 72.57-295.00 μm and 1.47-2.02, respectively. Furthermore, the encapsulation efficiency of GCO microcapsules was between 61.47 and 90.01 %. Finally, oxidation kinetics models of GCO and its microcapsules demonstrated that the zero-order model of GCO microcapsules was found to have a higher fit, which could better reflect the quality changes of GCO microcapsules during storage. Different combinations of proteins and polysaccharides exhibited effective oxidative stability against single proteins because of polysaccharide addition. This research revealed that soy protein isolate, sodium caseinate combined with polysaccharides can be used as a promising microencapsulating agent for microencapsulation of GCO, especially with sodium carboxymethylcellulose and sodium alginate, and provided useful information for the potential use of GCO in the development of powder food.

Fabrication and Characterization of Complex Coacervation: The Integration of Sesame Protein Isolate-Polysaccharides

The exceptional biocompatibility of emulsion systems that rely on stabilizing protein-polysaccharide particles presents extensive possibilities for the transportation of bioactive carriers, making them highly promising for various biological applications. The current work aimed to explore the phenomenon of complex coacervation between sesame protein isolate (SPI) and four distinct polysaccharides, namely, Arabic gum (GA), carrageenan (CAR), sodium carboxymethyl cellulose (CMC), and sodium alginate (SA). The study objective was achieved by fabricating emulsions through the blending of these polymers with oil at their maximum turbidity level (φ = 0.6), followed by the measurement of their rheological properties. The turbidity, ζ-potential, and particle size were among the techno-parameters analyzed to assess the emulsion stability. The microstructural characterization of the emulsions was conducted using both transmission electron microscopy (TEM) and scanning electron microscopy (SEM). Furthermore, the functional properties were examined using Fourier-transform infrared spectroscopy (FTIR) and X-ray diffraction (XRD). The SPI incorporated with SA, CMC, and CAR reached the maximum turbidity (0.2% w/v) at a ratio of 4:1, corresponding to the pH values of 4.5, 3, or 3.5, respectively. The SPI-GA mixture exhibited the maximum turbidity at a ratio of 10:1 and pH 4.5. Results from the FTIR and XRD analyses provided evidence of complex formation between SPI and the four polysaccharides, with the electrostatic and hydrogen bond interactions facilitating the binding of SPI to these polysaccharides. SPI was bound to the four polysaccharides through electrostatic and hydrogen bond interactions. The SPI-CMC and SPI-SA emulsions were more stable after two weeks of storage.

Sterols and pentacyclic triterpenoids from nettle root: content and composition as affected by pressurized liquid extraction

BACKGROUND

Nettle is a medicinal plant rich in bioactive molecules. The composition of nettle leaves and stems has been extensively studied, whereas the root has been insufficiently investigated. Therefore, the present study aimed to optimize the parameters of advanced extraction technique, pressurized liquid extraction (PLE), for the lipid fraction of nettle root rich in triterpenoid derivatives and to compare the efficiency of isolation under optimal conditions with conventional Soxhlet extraction (SE).

RESULTS

The PLE yields ranged from 0.39-1.63%, whereas the total content of triterpenoid derivatives ranged from 43.50-78.26 mg 100 g^-1 , with nine sterols and three pentacyclic triterpenoids identified and quantified within a total range of 42.81-76.57 mg 100 g^-1 and 0.69-1.68 mg 100 g^-1 dried root, respectively. The most abundant sterol and pentacyclic triterpenoid were β-sitosterol and β-amyrin acetate, with mean values of 50.21 mg 100 g^-1 and 0.56 mg 100 g^-1 dried root.

CONCLUSION

The optimal PLE conditions were 150 °C/5 min/four cycles and showed significantly better performance compared to SE (68 °C, 8 h), establishing an excellent technique for the isolation of the nettle root lipid fraction. Also, triterpenoid derivatives from nettle could be used as functional ingredients for the development of new foods and dietary supplements. © 2022 Society of Chemical Industry.

Insights into Protective Effects of Different Synbiotic Microcapsules on the Survival of Lactiplantibacillus plantarum by Electrospraying

This study evaluated the protective effects of different synbiotic microcapsules on the viability of encapsulated Lactiplantibacillus plantarum GIM1.648 fabricated by electrospraying. The optimum amount of substrate for three synbiotic microcapsules separately containing fructooligosaccharide (FOS), fish oil, and the complex of both were 4% FOS (SPI-F-L-P), 20 μL fish oil (SPI-O-L-P) and the complex of 20 μL fish oil, and 2% FOS (SPI-O-F-L-P), respectively. The obtained synbiotic microcapsules had a better encapsulation efficiency (EE) and survival rate (SR) after in vitro digestion than microcapsules without the addition of substrate (SPI-L-P) and SPI-O-F-L-P presented the highest EE (95.9%) and SR (95.5%). When compared to SPI-L-P, the synbiotic microcapsules possessed a more compact structure as proved by the SEM observation and their cell viability were significantly improved in response to environmental stresses (heat treatment, freeze drying, and storage). The synbiotic microcapsules containing the complex of FOS and fish oil showed the best beneficial effect, followed by ones with fish oil and then FOS, suggesting the FOS and fish oil complex has more potential in application.

Microencapsulation of Carvacrol by Complex Coacervation of Walnut Meal Protein Isolate and Gum Arabic: Preparation, Characterization and Bio-Functional Activity

As a natural phenolic compound, carvacrol has attracted much attention due to its excellent antibacterial and antioxidant activities. However, its application is limited due to its instability, such as easy volatilization, easy oxidation, etc. Protein-polysaccharide interactions provide strategies for improving their stability issues. In this study, the plant-based carvacrol microcapsules via complex coacervation between walnut meal protein isolate (WMPI) and gum Arabic (GA) has been fabricated and characterized. The formation conditions of WMPI-GA coacervates were determined by some parameters, such as pH, zeta-potential, and turbidity. The optimum preparation conditions were achieved at pH 4.0 with a WMPI-to-GA ratio of 6:1 (w/w). The mean particle size, loading capacity (LC), and encapsulation efficiency (EE) of the microcapsules were 43.21 μm, 26.37%, and 89.87%, respectively. Fourier transform infrared spectroscopy (FT-IR) and fluorescence microscopy further confirmed the successful microencapsulation of carvacrol. The microencapsulation of carvacrol improved the thermal stability of the free carvacrol. The swelling capacity results indicated that it could resist gastric acid, and facilitate its intestinal absorption. Meanwhile, the carvacrol molecules trapped within the microcapsules could be continuously released in a concentration-dependent manner. Furthermore, the microcapsules presented good antioxidant activity and antibacterial activity against the Gram-negative (E. coli) and the Gram-positive (S. aureus) bacteria. These results indicated that the obtained carvacrol microcapsules have a potential application value as a food preservative in the food industry.