Cadmium removal from aqueous solution by gene-modified Escherichia coli JM109

Microbes' role in environmental pollution and remediation: a bioeconomy focus approach

Bioremediation stands as a promising solution amid the escalating challenges posed by environmental pollution. Over the past 25 years, the influx of synthetic chemicals and hazardous contaminants into ecosystems has required innovative approaches for mitigation and restoration. The resilience of these compounds stems from their non-natural existence, distressing both human and environmental health. Microbes take center stage in this scenario, demonstrating their ability of biodegradation to catalyze environmental remediation. Currently, the scientific community supports a straight connection between biorefinery and bioremediation concepts to encourage circular bio/economy practices. This review aimed to give a pre-overview of the state of the art regarding the main microorganisms employed in bioremediation processes and the different bioremediation approaches applied. Moreover, focus has been given to the implementation of bioremediation as a novel approach to agro-industrial waste management, highlighting how it is possible to reduce environmental pollution while still obtaining value-added products with commercial value, meeting the goals of a circular bioeconomy. The main drawbacks and challenges regarding the feasibility of bioremediation were also reported.

Equilibrium, kinetic, and thermodynamic studies on the biosorption of lead by human metallothionein gene-cloned bacteria as a novel biosorbent

Heavy metals are the main pollutants in water and are an important global problem that threatens human health and ecosystems. In recent years, there has been an increasing interest in the use of genetically modified bacteria as an eco-friendly method to solve heavy metal pollution problems. The goal of this study was to generate genetically modified Escherichia coli expressing human metallothioneins (hMT2A and hMT3) and to determine their tolerance, bioaccumulation, and biosorption capacity to lead (Pb2+ ). Recombinant MT2A and MT3 strains expressing MT were successfully generated. Minimum inhibition concentrations (MIC) of Pb for MT2A and MT3 were found to be 1750 and 2000 mg L-1 , respectively. Pb2+ resistance and bioaccumulation capacity of MT3 were higher than MT2A. Therefore, only MT3 biosorbent was used in Pb2+ biosorption, and its efficiency was examined by performing experiments in a batch system. Pb2+ biosorption by MT3 was evaluated in terms of isotherms, kinetics, and thermodynamics. The results showed that Pb biosorption fits to the Langmuir isotherm model and the pseudo-first-order kinetic model, and the reaction is exothermic. The maximum Pb2+ capacity of the biosorbent was 50 mg Pb2+ g-1 . The potential of MT3 in Pb biosorption was characterized by Fourier-transform infrared spectroscopy (FT-IR), scanning electron microscopy (SEM), and scanning transmission electron microscopy (STEM) analyses. The desorption study showed that the sorbent had up to 74% recovery and could be effectively used four times. These findings imply that this biosorbent can be applied as a promising, precise, and effective means of removing Pb2+ from contaminated waters. PRACTITIONER POINTS: In this study, the tolerance levels, bioaccumulation, and biosorption capacities of Pb in aqueous solutions were determined for the first time in recombinant MT2A and MT3 strains in which human MT2A and MT3 genes were cloned. The biosorbent of MT3, which was determined to be more effective in Pb bioaccumulation, was synthesized and used in Pb biosorption. The Pb biosorption mechanism of MT3 biosorbent was identified using isotherm modeling, kinetic modeling, and thermodynamic studies. The maximum Pb removal percentage capacity of the biosorbent was 90%, whereas the maximum biosorption capacity was up to 50 mg Pb2+ g-1 . These results indicated that MT3 biosorbent has a higher Pb biosorption capacity than existing recombinant biosorbents. MT3 biosorbent can be used as a promising and effective biosorbent for removing Pb from wastewater.

Effect of EPS production on the performance of membrane-based biofilm reactors

This study explored the effect of extracellular polymeric substance (EPS) production on the performance of membrane-based biofilm reactors. Changing EPS production was induced by eliminating one of the main EPS polysaccharides, i.e., Pel. The studies were carried out using a pure culture of either Pseudomonas aeruginosa or an isogenic P. aeruginosa mutant that was unable to produce the Pel polysaccharide. The biofilm cell density for both strains was compared to confirm the Pel deletion mutant decreased overall EPS production in a bioreactor system. When the Pel-deficient mutant was grown as a biofilm, its cell density, i.e., ratio of cells/(cells + EPS), was 74 % higher than the wild type, showing EPS production was reduced by eliminating pel production. The growth kinetics were determined for both strains. The Pel-deficient mutant had a maximum specific growth rate (μ^) that was 14% higher than the wild type. Next, the effects of EPS reduction on reactor performance were assessed for a membrane aerated biofilm reactor (MABR) and a membrane bioreactor (MBR). For the MABR, the organic removal with the Pel-deficient mutant was around 8% higher than for the wild type. For the MBR, the time to reach the fouling threshold was 65 % greater for the Pel-deficient mutant than for the wild type. These results suggest that amount of EPS production can have significant effects on bacterial growth kinetics and bacterial cell density, which in turn can affect the performance of the membrane-based biofilm reactors. In both cases, lower EPS production correlated with more efficient treatment processes.

Bioremediation potential of cadmium by recombinant Escherichia coli surface expressing metallothionein MTT5 from Tetrahymenathermophila

Cadmium (Cd) is a common heavy metal contaminant in industrial wastewater that causes many diseases in humans. Metallothionein (MT), a cysteine-rich metal-binding protein, is well known in chelate-heavy metals. In this study, we expressed MTT5 of Tetrahymena thermophila fused with Lpp-OmpA in the outer membrane of Escherichia coli to determine its ability to accumulate and adsorb Cd. Our results revealed that our recombinant E. coli had a 4.9-fold greater Cd adsorption compared to wild E. coli. Adsorption isothermic analysis demonstrated that the adsorption behavior for Cd in our recombinant bacteria was better fitted into the Freundlich isotherm model than Langmuir isotherm model. Fourier-transform infrared spectroscopy indicated that phosphate and organic phosphate groups were involved in the interaction between Cd and the bacterial surface. Using quantitative reverse transcription polymerase chain reaction, we further showed that the expression of metal-resistance genes (dnaK and clpB) was downregulated due to surface MTT5 protected our recombinant bacteria from Cd²⁺ adsorption. Furthermore, we showed that our recombinant bacteria could adsorb Cd from the contaminated wastewater containing other metals and were suggested to be applied in the field study.

Synthetic biology techniques to tackle heavy metal pollution and poisoning

The requirement for natural resources and energy increases continually with the increase in population. An inevitable result of this is soil, water, and air pollution with diverse pollutants, including heavy metals. Synthetic Biology involves using modular, interchangeable biological parts, devices in standard chassis or whole organisms to achieve a programmed result that can be quantified and optimized till it meets the required efficiency. This makes synthetic biology techniques very popular to tackle pressing global issues such as heavy metal poisoning. This review aimed to highlight various advancements as well as benefits, risks, and problems in synthetic biology techniques for detection, bioaccumulation, and biosorption of various heavy metals using engineered organisms. We found that while such an approach is cost-effective, accessible, and efficient, there are several inherent technological and ethical issues including but not limited to metabolic burden and consequences of use of genetically modified organisms respectively. Overcoming these hurdles will probably take time and innumerable conversations, and should be done through education and a culture of responsible research, rather than enforcing restrictions on the development of synthetic biology.

A critical review on microbes-based treatment strategies for mitigation of toxic pollutants

Contamination of the environment through toxic pollutants poses a key risk to the environment due to irreversible environmental damage(s). Industrialization and urbanization produced harmful elements such as petrochemicals, agrochemicals, pharmaceuticals, nanomaterials, and herbicides that are intentionally or unintentionally released into the water system, threatening biodiversity, the health of animals, and humans. Heavy metals (HMs) in water, for example, can exist in a variety of forms that are inclined by climate features like the presence of various types of organic matter, pH, water system hardness, transformation, and bioavailability. Biological treatment is an important tool for removing toxic contaminants from the ecosystem, and it has piqued the concern of investigators over the centuries. In situ bioremediation such as biosparging, bioventing, biostimulation, bioaugmentation, and phytoremediation and ex-situ bioremediation includes composting, land farming, biopiles, and bioreactors. In the last few years, scientific understanding of microbial relations with particular chemicals has aided in the protection of the environment. Despite intensive studies being carried out on the mitigation of toxic pollutants, there have been limited efforts performed to discuss the solutions to tackle the limitations and approaches for the remediation of heavy metals holistically. This paper summarizes the risk assessment of HMs on aquatic creatures, the environment, humans, and animals. The content of this paper highlights the principles and limitations of microbial remediation to address the technological challenges. The coming prospect and tasks of evaluating the impact of different treatment skills for pollutant remediation have been reviewed in detail. Moreover, genetically engineered microbes have emerged as powerful bioremediation capabilities with significant potential for expelling toxic elements. With appropriate examples, current challenging issues and boundaries related to the deployment of genetically engineered microbes as bioremediation on polluted soils are emphasized.

Removal of toxic heavy metals using genetically engineered microbes: Molecular tools, risk assessment and management strategies

The direct release of industrial effluent into the water and other anthropogenic activities causes water pollution. Heavy metal ions are the primary contaminant in the industrial effluents which are exceptionally toxic at low concentrations, terribly disturb the endurance equilibrium of activities in the eco-system and be remarkably hazardous to human health. Different conventional treatment methodologies were utilized for the removal of toxic pollutants from the contaminated water which has several drawbacks such as cost-ineffective and lower efficiency. Recently, genetically modified micro-organisms (GMMs) stand-out for the removal of toxic heavy metals are viewed as an economically plausible and environmentally safe technique. GMMs are microorganisms whose genetic material has been changed utilizing genetic engineering techniques that exhibit enhanced removal efficiency in comparison with the other treatment methodologies. The present review comments the GMMs such as bacteria, algae and fungi and their potential for the removal of toxic heavy metals. This review provides current aspects of different advanced molecular tools which have been used to manipulate micro-organisms through genetic expression for the breakdown of metal compounds in polluted areas. The strategies, major limitations and challenges for genetic engineering of micro-organisms have been reviewed. The current review investigates the approaches working on utilizing genetically modified micro-organisms and effective removal techniques.

Study on metal binding capacity of the freshwater crab Sinopotamon henanense's recombinant copper specific binding metallothionein expressed in Escherichia coli

The copper specific binding metallothionein (CuMT) is a type of cysteine-rich, metal-binding, small protein which plays an important role in Cu²⁺ metabolism in vertebrates. In this study, we investigated the metal tolerance and removing ability of recombinant strains harboring CuMT obtained in vivo from the freshwater crab Sinopotamon henanense (ShCuMT) in order to study its physiological functions and metal binding capacity. We performed a 3D modeling of ShCuMT and created its structural and functional models using the I-TASSER program. The shCumt gene was inserted into a pGEX-4t-1 vector and recombinant soluble ShCuMT was expressed in Escherichia coli. In addition, in order to characterize the tolerance and removing ability of heavy metals in E. coli with ShCuMT expression, the recombinant strains harboring ShCuMT were exposed to various concentrations of Cd²⁺, Cu²⁺ and Zn²⁺, respectively. The results showed that ShCuMT contains transition metal binding sites. In addition, E. coli cells expressing ShCuMT exhibited enhanced metal tolerance and higher removing ability of metal ions than control cells. However, compared with Cd²⁺ and Zn²⁺, E. coli cells expressing ShCuMT have stronger tolerance and higher removing ability of Cu²⁺. In general, ShCuMT contains multiple transition metal binding sites, and it could enhance tolerance and removing ability of metal ions. Therefore, ShCuMT can provide potential candidates for heavy metal bioremediation. This research on the metal binding properties of ShCuMT provides a scientific basis for bioremediation of heavy metal pollution by the recombinant strains.

Metal and metal(loids) removal efficiency using genetically engineered microbes: Applications and challenges

The environment is being polluted in different many with metal and metalloid pollution, mostly due to anthropogenic activity, which is directly affecting human and environmental health. Metals and metalloids are highly toxic at low concentrations and contribute primarily to the survival equilibrium of activities in the environment. However, because of non-degradable, they persist in nature and these metal and metalloids bioaccumulate in the food chain. Genetically engineered microorganisms (GEMs) mediated techniques for the removal of metals and metalloids are considered an environmentally safe and economically feasible strategy. Various forms of GEMs, including fungi, algae, and bacteria have been produced by recombinant DNA and RNA technologies, which have been used to eliminate metal and metalloids compounds from the polluted areas. Besides, GEMs have the potentiality to produce enzymes and other metabolites that are capable of tolerating metals stress and detoxify the pollutants. Thus, the aim of this review is to discuss the use of GEMs as advanced tools to produce metabolites, signaling molecules, proteins through genetic expression during metal and metalloids interaction, which help in the breakdown of persistent pollutants in the environment.

Microalgal Metallothioneins and Phytochelatins and Their Potential Use in Bioremediation

The persistence of heavy metals (HMs) in the environment causes adverse effects to all living organisms; HMs accumulate along the food chain affecting different levels of biological organizations, from cells to tissues. HMs enter cells through transporter proteins and can bind to enzymes and nucleic acids interfering with their functioning. Strategies used by microalgae to minimize HM toxicity include the biosynthesis of metal-binding peptides that chelate metal cations inhibiting their activity. Metal-binding peptides include genetically encoded metallothioneins (MTs) and enzymatically produced phytochelatins (PCs). A number of techniques, including genetic engineering, focus on increasing the biosynthesis of MTs and PCs in microalgae. The present review reports the current knowledge on microalgal MTs and PCs and describes the state of art of their use for HM bioremediation and other putative biotechnological applications, also emphasizing on techniques aimed at increasing the cellular concentrations of MTs and PCs. In spite of the broad metabolic and chemical diversity of microalgae that are currently receiving increasing attention by biotechnological research, knowledge on MTs and PCs from these organisms is still limited to date.

Tandem oligomeric expression of metallothionein enhance heavy metal tolerance and bioaccumulation in Escherichia coli

Metallothioneins (MTs) are a family of low molecular weight, cysteine-rich, metal-binding proteins, which play important roles in metal homeostasis and heavy metal detoxification. In our previous study, a novel full length MT cDNA was successfully cloned from the freshwater crab (Sinopotamon henanense). In the present study, tandem repeats of two and three copies of the crab MT gene were integrated by overlap extension PCR (SOE-PCR) and expressed in Escherichia coli. The SUMO fusion expression system was adopted to increase the stability and solubility of the recombinant MT proteins. The recombinant proteins were purified and their metal-binding abilities were further analyzed by the ultraviolet absorption spectral scan. Furthermore, the metal tolerance and bioaccumulation of E. coli cells expressing oligomeric MTs were determined. Results showed that the recombinant plasmids pET28a-SUMO-2MT and pET28a-SUMO-3MT were successfully constructed. SDS-PAGE analysis showed that the SUMO-2MT and SUMO-3MT were expressed mainly in the soluble forms. Oligomeric MTs expression significantly enhanced Cu, Cd or Zn tolerance and accumulation in E. coli in the order: SUMO-3MT˃SUMO-2MT˃SUMO-MT˃control. Cells harboring pET28a-SUMO -3MT exhibited the highest Cu, Cd or Zn bioaccumulation at 5.8-fold, 3.1-fold or 6.7-fold higher than that of the control cells. Our research could lay a foundation for large-scale preparation of MTs and provide a scientific basis for bioremediation of heavy metal pollution by oligomeric MTs.

Cadmium-Bacteria Complexation and Subsequent Bacteria-Facilitated Cadmium Transport in Saturated Porous Media

Cadmium (Cd) contamination is becoming a significant environmental concern due to its persistency in soil. In the subsurface, the fate and transport of Cd are significantly affected by the presence of organic carriers, including bacteria, which are ubiquitous. In this research, facilitated Cd transport by four different bacterial strains in zeolite was investigated by column experiments under three different Cd introduction scenarios (i.e., a Cd and bacteria mixture, Cd and bacteria introduced separately but simultaneously, and Cd added to the column, followed by bacterial flushing), through which Cd-bacteria complexes formed. In turn, Cd-bacteria complexation affected bacterial transport. Bacteria were least retarded when Cd was pre-deposited, with mass recovery>90% for all strains. More Cd was recovered when introduced as a mixture with bacteria (i.e., Cd mass recovery ranging from 16 to 25%). Obtained bacteria and Cd breakthrough curves were simulated by the attachment-detachment model in Hydrus-1D. Damkohler number and reversibility were both found to be suitable to control the mass recovery of Cd and bacteria in all investigated scenarios.

Heavy Metal Removal by Bioaccumulation Using Genetically Engineered Microorganisms

Wastewater effluents from mines and metal refineries are often contaminated with heavy metal ions, so they pose hazards to human and environmental health. Conventional technologies to remove heavy metal ions are well-established, but the most popular methods have drawbacks: chemical precipitation generates sludge waste, and activated carbon and ion exchange resins are made from unsustainable non-renewable resources. Using microbial biomass as the platform for heavy metal ion removal is an alternative method. Specifically, bioaccumulation is a natural biological phenomenon where microorganisms use proteins to uptake and sequester metal ions in the intracellular space to utilize in cellular processes (e.g., enzyme catalysis, signaling, stabilizing charges on biomolecules). Recombinant expression of these import-storage systems in genetically engineered microorganisms allows for enhanced uptake and sequestration of heavy metal ions. This has been studied for over two decades for bioremediative applications, but successful translation to industrial-scale processes is virtually non-existent. Meanwhile, demands for metal resources are increasing while discovery rates to supply primary grade ores are not. This review re-thinks how bioaccumulation can be used and proposes that it can be developed for bioextractive applications-the removal and recovery of heavy metal ions for downstream purification and refining, rather than disposal. This review consolidates previously tested import-storage systems into a biochemical framework and highlights efforts to overcome obstacles that limit industrial feasibility, thereby identifying gaps in knowledge and potential avenues of research in bioaccumulation.

In a quest for engineering acidophiles for biomining applications: challenges and opportunities

Biomining with acidophilic microorganisms has been used at commercial scale for the extraction of metals from various sulfide ores. With metal demand and energy prices on the rise and the concurrent decline in quality and availability of mineral resources, there is an increasing interest in applying biomining technology, in particular for leaching metals from low grade minerals and wastes. However, bioprocessing is often hampered by the presence of inhibitory compounds that originate from complex ores. Synthetic biology could provide tools to improve the tolerance of biomining microbes to various stress factors that are present in biomining environments, which would ultimately increase bioleaching efficiency. This paper reviews the state-of-the-art tools to genetically modify acidophilic biomining microorganisms and the limitations of these tools. The first part of this review discusses resilience pathways that can be engineered in acidophiles to enhance their robustness and tolerance in harsh environments that prevail in bioleaching. The second part of the paper reviews the efforts that have been carried out towards engineering robust microorganisms and developing metabolic modelling tools. Novel synthetic biology tools have the potential to transform the biomining industry and facilitate the extraction of value from ores and wastes that cannot be processed with existing biomining microorganisms.

Cadmium-109 Radioisotope Adsorption onto Polypyrrole Coated Sawdust of Dryobalanops aromatic: Kinetics and Adsorption Isotherms Modelling

A radiotracer study was conducted to investigate the removal characteristics of cadmium (109Cd) from aqueous solution by polypyrrole/ sawdust composite. Several factors such as solution pH, sorbent dosage, initial concentration, contact time, temperature and interfering metal ions were found to have influence on the adsorption process. The kinetics of adsorption was relatively fast, reaching equilibrium within 3 hours. A lowering of the solution pH reduced the removal efficiency from 99.3 to ~ 46.7% and an ambient temperature of 25°C was found to be optimum for maximum adsorption. The presence of sodium and potassium ions inhibited 109Cd removal from its aqueous solution. The experimental data for 109Cd adsorption showed a very good agreement with the Langmuir isotherm and a pseudo-first order kinetic model. The surface condition of the adsorbent before and after cadmium loading was investigated using BET, FESEM and FTIR. Considering the low cost of the precursor's materials and the toxicity of 109Cd radioactive metal, polypyrrole synthesized on the sawdust of Dryobalanops aromatic could be used as an efficient adsorbent for the removal of 109Cd radioisotope from radionuclide-containing effluents.

Efficient Cadmium Bioaccumulation by Displayed Hybrid CS3 Pili: Effect of Heavy Metal Binding Motif Insertion Site on Adsorption Capacity and Selectivity

The objective of this study was to evaluate the influence of insertion site of the metal binding motif on the bioaccumulation capacity of the hybrid CS3 pili displayed on the surface of Escherichia coli using both computational and experimental methods. Two metal binding motifs (cadmium binding motif (cbm) and cadmium binding beta motif (cbβm)), identified by searching against the PROSITE database, were inserted into five putative permissive sites of CstH protein (CS3 pili subunit) by using SOEing PCR technique. The expression and surface display of the hybrid pili were evaluated using dot and Western blotting methods and also immunofluorescence microscopy. The cadmium binding affinity and selectivity of the recombinant bacteria displaying various hybrid pili were evaluated using atomic absorption procedure. The results showed that the cadmium binding motifs enabled the cells to sequester cadmium 8- to 16-fold higher than the E.coli expressing native pili. The location of the metal binding motifs in the pili subunit had also a significant effect on the metal-binding properties of the hybrid pili. The insertion at positions 107-108 and 92-93 of the mature CstH showed the highest adsorption in comparison to other positions.

Isolation, Identification, and Characterization of Cadmium Resistant Pseudomonas sp. M3 from Industrial Wastewater

The present study deals with the isolation, identification, and characterization of the cadmium resistant bacteria from wastewater collected from industrial area of Penang, Malaysia. The isolate was selected based on high level of the cadmium and antibiotic resistances. On the basis of morphological, biochemical characteristics, 16S rDNA gene sequencing and phylogeny analysis revealed that the strain RZCd1 was authentically identified as Pseudomonas sp. M3. The industrial isolate showed more than 70% of the cadmium removal in log phase. The cadmium removal capacity of strain RZCd1 was affected by temperature and pH. At pH 7.0 and 35°C, strain RZCd1 showed maximum cadmium removal capacity. The minimal inhibitory concentration of strain RZCd1 against the cadmium was 550 µg/mL. The resistance against the cadmium was associated with resistance to multiple antibiotics: amoxicillin, penicillin, cephalexin, erythromycin, and streptomycin. The strain RZCd1 also gave thick bands of proteins in front of 25 kDa in cadmium stress condition after 3 h of incubation. So the identified cadmium resistant bacteria may be useful for the bioremediation of cadmium contaminated industrial wastewater.

Cadmium

Cadmium is not an essential element for life. It is geologically marginal but anthropogenic activities have contributed significantly to its dispersion in the environment and to cadmium exposure of living species. The natural speciation of the divalent cation Cd2+ is dominated by its high propensity to bind to sulfur ligands, but Cd2+ may also occupy sites providing imidazole and carboxylate ligands. It binds to cell walls by passive adsorption (bio-sorption) and it may interact with surface receptors. Cellular uptake can occur by ion mimicry through a variety of transporters of essential divalent cations, but not always. Once inside cells, Cd2+ preferentially binds to thiol-rich molecules. It can accumulate in intracellular vesicles. It may also be transported over long distances within multicellular organisms and be trapped in locations devoid of efficient excretion systems. These locations include the renal cortex of animals and the leaves of hyper-accumulating plants. No specific regulatory mechanism monitors Cd2+ cellular concentrations. Thiol recruitment by cadmium is a major interference mechanism with many signalling pathways that rely on thiolate-disulfide equilibria and other redox-related processes. Cadmium thus compromises the antioxidant intracellular response that relies heavily on molecules with reactive thiolates. These biochemical features dominate cadmium toxicity, which is complex because of the diversity of the biological targets and the consequent pleiotropic effects. This chapter compares the cadmium-handling systems known throughout phylogeny and highlights the basic principles underlying the impact of cadmium in biology.

Possible use of Serratia marcescens in toxic metal biosorption (removal)

BACKGROUND, AIM AND SCOPE

Metal pollution is a serious problem for environmental safety and programmes of monitoring and bioremediation are needed. Among the processes of bioremediation, the use of microbes to remove and degrade contaminants is considered a biotechnological approach to clean up polluted environments.

AIM

The aim of this study was to evaluate the ability of Serratia marcescens in Pb, Cd and Cr removal and the potential use of these bacteria in toxic metal bioremediation from polluted environments.

METHODS

A short-term study (120 min) was carried out to study the bacterial growth in the presence of sub-inhibitory concentrations of each metal analysed and the kinetics of metal biosorption in S. marcescens strain. In addition, metal influence on the biosynthesis of the red pigment 'prodigiosina' by S. marcescens was monitored.

RESULTS

The results obtained in this study show metals biosorption by S. marcescens (range: 0.0133-0.213 μg/g for Pb; 0.097-0.1853 μg/g for Cd; and 0.105-0.176 μg/g for Cr) and confirm the possible use of this bacterium to realize bioremediation processes, especially for Pb removal, and as a bioindicator of metal pollution.

Surface display of monkey metallothionein α tandem repeats and EGFP fusion protein on Pseudomonas putida X4 for biosorption and detection of cadmium

Monkey metallothionein α domain tandem repeats (4mMTα), which exhibit high cadmium affinity, have been displayed for the first time on the surface of a bacterium using ice nucleation protein N-domain (inaXN) protein from the Xanthomonas campestris pv (ACCC-10049) as an anchoring motif. The shuttle vector pIME, which codes for INAXN-4mMTα-EGFP fusion, was constructed and used to target 4mMTα and EGFP on the surface of Pseudomonas putida X4 (CCTCC-209319). The surface location of the INAXN-4mMTα-EGFP fusion was further verified by western blot analysis and immunofluorescence microscopy. The growth of X4 showed resistance to cadmium presence. The presence of surface-exposed 4mMTα on the engineered strains was four times higher than that of the wild-type X4. The Cd²⁺ accumulation by X4/pIME was not only four times greater than that of the original host bacterial cells but was also remarkably unaffected by the presence of Cu²⁺ and Zn²⁺. Moreover, the surface-engineered strains could effectively bind Cd²⁺ under a wide range of pH levels, from 4 to 7. P. putida X4/pIME with surface-expressed 4mMTα-EGFP had twice the cadmium binding capacity as well as 1.4 times the fluorescence as the cytoplasmic 4mMTa-EGFP. These results suggest that P. putida X4 expressing 4mMTα-EGFP with the INAXN anchor motif on the surface would be a useful tool for the remediation and biodetection of environmental cadmium contaminants.

Construction and characterization of a photosynthetic bacterium genetically engineered for Hg2+ uptake

A recombinant photosynthetic bacterium, Rhodopseudomonas palustris, was constructed to simultaneously express mercury transport system and metallothionein for Hg(2+) removal from heavy metal wastewater. The effects of essential process parameters, including pH, ionic strength and presence of co-ions on Hg(2+) uptake were evaluated. The results showed that compared with wild type R. palustris, recombinant strain displayed stronger resistance to toxic Hg(2+), and its Hg(2+) binding capacity was enhanced threefolds. In the range of pH 4-10, recombinant R. palustris maintained effective accumulation of Hg(2+). The presence of 10 mg L(-1) Mg(2+), Ca(2+), Zn(2+) or Ni(2+) did not significantly influence Hg(2+) bioaccumulation by recombinant R. palustris from solutions containing 0.2 mg L(-1) Hg(2+), while Na(+) and Cd(2+) posed serious adverse effect on Hg(2+) uptake. Furthermore, EDTA treatment experiment confirmed that different from wild type R. palustris that mainly absorbed Hg(2+) on the cell surface, recombinant R. palustris transported most of the bound Hg(2+) into the cells.

Cd(II) and As(III) bioaccumulation by recombinant Escherichia coli expressing oligomeric human metallothioneins

Metallothioneins (MTs) are a family of metal binding proteins. Recombinant Escherichia coli expressing the human MT (hMT-1A) gene was constructed for bioaccumulation of heavy metals. In order to increase protein stability, the glutathione S-transferase (GST) gene was fused with the hMT-1A gene and coexpressed. In order to increase MT expression efficiency and metal binding capacity, two, three or four hMT-1A genes were integrated in series and overexpressed in E. coli. The recombinant E. coli expressing the GST fused trimeric hMT-1A protein exhibited the highest Cd(II) and As(III) bioaccumulation ability, 6.36 mg Cd/g dry cells and 7.59 mg As/g dry cells, respectively.