A fast response cadmium-selective polymeric membrane electrode based on N,N'-(4-methyl-1,2-phenylene)diquinoline-2-carboxamide as a new neutral carrier

Application of l-cystine modified zeolite for preconcentration and determination of ultra-trace levels of cadmium by flame atomic absorption spectrometry

A very convenient, sensitive and precise solid phase extraction (SPE) system was developed for enrichment and determination of ultra-trace of cadmium ion in water and plant samples. This method was based on the retention of cadmium(II) ions by l-cystine adsorbed in Y-zeolite and carry out in a packed mini-column. The retained cadmium ions then were eluted and determined by flame atomic absorption spectrometry. The scanning electron microscopy (SEM), powder X-ray diffraction (XRD) and Fourier Transform Infrared (FT-IR) spectroscopy techniques were applied for the characterization of cystine modified zeolite (CMZ). Some experimental conditions affecting the analytical performance such as pH, eluent type, concentration of sample, eluent flow rate and also the presence of interfering ions were investigated. The calibration graph was linear within the range of 0.1-7.5ngmL(-1) and limit of detection was obtained 0.04ngmL(-1) with the preconcentration factor of 400. The relative standard deviation (RSD) was obtained 1.4%, indicating the excellent reproducibility of this method. The proposed method was successfully applied for the extraction and determination of cadmium(II) ion in black tea, cigarette's tobacco and also various water samples.

Sensitive determination of in , beverage and cereal samples by a novel liquid-phase microextraction coupled with flame atomic absorption spectrometry

A new microextraction technique termed dispersive liquid-liquid microextraction based on solidification of floating organic droplet (DLLME-SFO) coupled with flame atomic absorption spectrometry (FAAS) has been developed for the determination of trace cadmium in water, beverage and cereal samples. In the DLLME-SFO, cadmium was first complexed with 8-hydroxyquinoline, and then extracted into a small volume of the extraction solvent (1-dodecanol) with methanol as a dispersive solvent. Then, the extractant was analyzed by FAAS. The main factors affecting the DLLME-SFO, such as the type and volume of the extraction solvent and dispersive solvent, extraction time, sample volume, the amount of chelating agent, and salt addition were optimized. Under the optimum conditions, the established method showed a good linearity within a range of 1-50 ng mL-1, high enhancement factor (133), low limit of detection (0.3 ng mL-1), satisfactory repeatabilities (the relative standard deviation (RSD) = 3.7%, n = 6), and high recoveries (from 91.8 to 104.4%). The method was applied to determine the cadmium in three different samples (water, beverage and cereal samples) and two certified reference materials. The results indicated that the method can be applied for the determination of trace cadmium in real samples with complex matrices.

Ion-exchange studies on poly-o-anisidine Sn(IV) phosphate nano composite and its application as Cd(II) ion-selective membrane electrode

An organic-inorganic composite, poly-o-anisidine Sn(IV) phosphate, was chemically synthesized by mixing ortho-anisidine into gels of Sn(IV) phosphate with different mixing volume ratios. Studies on the effect of eluant concentration, elution behavior and separation of metal ions were carried out to understand the ion-exchange capabilities. Due to Cd(II) selective nature of composite, revealed by distribution studies, Cd(II) ion selective membrane electrode was fabricated. The analytical utility of the electrode was established by employing it as an indicator electrode in electrometric titrations having fast response time, 3–5s, and long life span of six months. Some physical parameters like self-diffusion coefficient (D0), activation energy (Ea) and entropy of activation (ΔS0) have been evaluated under conditions favoring a particle diffusion-controlled mechanism by studying ion-exchange kinetics.

Novel PVC-membrane potentiometric sensors based on a recently synthesized sulfur-containing macrocyclic diamide for Cd2+ ion. Application to flow-injection potentiometry

A new sulfur-containing macrocyclic diamide, 1,15-diaza-3,4,12,13-dibenzo-5,11-dithia-8-oxa-1,15-(2,6-pyrido)cyclooctadecan-2,14-dione, L, was synthesized, characterized and used as an active component for fabrication of PVC-based polymeric membrane (PME), coated graphite (CGE) and coated silver wire electrodes (CWE) for sensing Cd(2+) ion. The electrodes exhibited linear Nernstian responses to Cd(2+) ion in the concentration range of 3.3 x 10(-6) to 3.3 x 10(-1)M (for PME, LOD=1.2 x 10(-6)M), 2.0 x 10(-7) to 3.3 x 10(-1)M (for CWE, LOD=1.3 x 10(-7)M) and 1.6 x 10(-8) to 1.3 x 10(-1)M (for CGE, LOD=1.0 x 10(-8)M). The CGE was used as a proper detection system in flow-injection potentiometry (FIP) with a linear Nernstian range of 3.2 x 10(-8) to 1.4 x 10(-1)M (LOD=1.3 x 10(-8)M). The optimum pH range was 3.5-7.6. The electrodes revealed fairly good discriminating ability towards Cd(2+) in comparison with a large number of alkali, alkaline earth, transition and heavy metal ions. The electrodes found to be chemically inert, showing a fast response time of <5s, and could be used practically over a period of about 2-3 months. The practical utility of the proposed system has also been reported.

Simple hollow fiber renewal liquid membrane extraction method for pre-concentration of Cd(II) in environmental samples and detection by flame atomic absorption spectrometry

A hollow fiber renewal liquid membrane (HFRLM) extraction method to determine cadmium (II) in water samples using Flame Atomic Absorption Spectrometry (FAAS) was developed. Ammonium O,O-diethyl dithiophosphate (DDTP) was used to complex cadmium (II) in an acid medium to obtain a neutral hydrophobic complex (ML(2)). The organic solvent introduced to the sample extracts this complex from the aqueous solution and carries it over the poly(dimethylsiloxane) (PDMS) membrane, that had their walls previously filled with the same organic solvent. The organic solvent is solubilized inside the PDMS membrane, leading to a homogeneous phase. The complex strips the lumen of the membrane where, at higher pH, the complex Cd-DDTP is broken down and cadmium (II) is released into the stripping phase. EDTA was used to complex the cadmium (II), helping to trap the analyte in the stripping phase. A multivariate procedure was used to optimize the studied variables. The optimized variables were: sample (donor phase) pH 3.25, DDTP concentration 0.05% (m/v), stripping (acceptor phase) pH 8.75, EDTA concentration 1.5x10(-2) mol L(-1), extraction temperature 40 degrees C, extraction time 40 min, a solvent mixture N-butyl acetate and hexane (60/40%, v/v) with a volume of 100 microL, and addition of ammonium sulfate to saturate the sample. The sample volume used was 20 mL and the stripping volume was 165 microL. The analyte enrichment factor was 120, limit of detection (LOD) 1.3 microg L(-1), relative standard deviation (RSD) 5.5% and the working linear range 2-30 microg L(-1).