A study towards release dynamics of thiram fungicide from starch-alginate beads to control environmental and health hazards

Metabolism of a fungicide propiconazole by Cunninghamella elegans ATCC36112

The metabolic breakdown of propiconazole by fungi was examined, and it was found that the microbial model (Cunninghamella elegans ATCC36112) efficiently degrades the triazole fungicide propiconazole through the action of cytochrome P450. This enzyme primarily facilitates the oxidation and hydrolysis processes involved in phase I metabolism. We observed major metabolites indicating hydroxylation/oxidation of propyl groups of propiconazole. Around 98% of propiconazole underwent degradation within a span of 3 days post-treatment, leading to the accumulation of five metabolites (M1-M5). The experiments started with a preliminary identification of propiconazole and its metabolites using GC-MS. The identified metabolites were then separated and identified by in-depth analysis using preparative UHPLC and MS/MS. The metabolites of propiconazole are M1 (CGA-118245), M2(CGA-118244), M3(CGA-136735), M4(GB-XLIII-42-1), and M5(SYN-542636). To further investigate the role of key enzymes in potential fungi, we treated the culture medium with piperonyl butoxide (PB) and methimazole (MZ), and then examined the kinetic responses of propiconazole and its metabolites. The results indicated a significant reduction in the metabolism rate of propiconazole in the medium treated with PB, while methimazole showed weaker inhibitory effects on the metabolism of propiconazole in the fungus C. elegans.

Functionally responsive hydrogels with salt-alkali sensitivity effectively target soil amelioration

The long-standing crisis of soil salinization and alkalization poses a significant challenge to global agricultural development. High soil salinity-alkalinity, water dispersion, and nutrient loss present major hurdles to soil improvement. Novel environmentally friendly gels have demonstrated excellent water retention and slow-release capabilities in agricultural enhancement. However, their application for improving saline-alkali soil is both scarce and competitive. This study proposes a new strategy for regulating saline-alkali soil using gel-coated controlled-release soil modifiers (CWR-SRMs), where radical-polymerized gels are embedded on the surface of composite gel beads through spray coating. Characterization and performance analysis reveal that the three-dimensional spatial network structure rich in hydrophilic groups exhibits good thermal stability (first-stage weight loss temperature of 257.7 °C in thermogravimetric analysis) and encapsulation efficiency for fulvic acid‑potassium (FA-K), which can enhance soil quality in saline-alkali environments. The molecular chain relaxation under saline-alkali conditions promotes a synergistic effect of swelling and slow release, endowing it with qualifications as a water reservoir, Ca2+ source unit, and slow-release body. The results of a 6 weeks incubation experiment on 0-20 cm saline-alkaline soil with different application gradients showed that the gradient content had a significant effect on the soil improvement effect. Specifically, the T2 (the dosage accounted for 1 % of soil mass) treatment significantly increases water retention (30 % ~ 90 %), and nutrient levels (30 % ~ 50 %), while significantly decreasing soil sodium colloid content (30 % ~ 60 %) and soil pH (10 % ~ 15 %). Furthermore, PCA analysis indicates that the addition of 1 % CWR-SRMs as amendments can significantly adjust the negative aspects of soil salinity and alkalinity. This highlights the excellent applicability of CWR-SRMs in improving saline-alkali agricultural ecosystems, demonstrating the potential value of novel environmentally friendly gels as an alternative solution for soil challenges persistently affected by adverse salinity and alkalinity.

Sequential starch modification by branching enzyme and 4-α-glucanotransferase improves retention of curcumin in starch-alginate beads

A new super-branched amylopectin with longer exterior chains was produced from normal maize starch by modification with branching enzyme followed by 4-α-glucanotransferase, and applied for co-entrapment of a curcumin-loaded emulsion in alginate beads. The network structure of the gel beads was obtained with Ca2+-cross-linked alginate and a modest load of retrograded starch. The dual enzyme modified starch contained more and longer α-1,6-linked branch chains than single enzyme modified and unmodified starches and showed superior resistance to digestive enzymes. Alginate beads with or without starch were of similar size (1.69-1.74 mm), but curcumin retention was improved 1.4-2.8-fold in the presence of different starches. Thus, subjecting the curcumin-loaded beads to in vitro simulated gastrointestinal digestion resulted in retention of 70, 43 and 22 % of the curcumin entrapped in the presence of modified, unmodified, or no starch, respectively. Molecular docking provided support for curcumin interacting with starch via hydrogen bonding, hydrophobic contacts and π-π stacking. The study highlights the potential of utilizing low concentration of dual-enzyme modified starch with alginate to create a versatile vehicle for controlled release and targeted delivery of bioactive compounds.

Ginsenoside Rg1 regulates thiram-induced chondrocytes' apoptosis and angiogenesis in broiler chickens

Tibial dyschondroplasia (TD) is a developmental cartilaginous disease due to thiram toxicity. The abnormity of chondrocytes and insufficient angiogenesis within the growth plate are the major factors leading to the occurrence of TD in most cases. In the current study, we evaluated the beneficial effects of ginsenoside (Rg1) against thiram-induced TD for knowing the possible underlying mechanisms in broiler chickens through in vivo and in vitro assessment. Arbor acres broilers (1-day-old, n = 120) were randomly divided for the in vivo evaluation. The control broilers were fed under normal conditions during the whole experiment cycle (18 days). The TD broilers were fed with 50 mg/kg thiram, while the treatment group was given 40 mg/kg of Rg1. According to our findings, thiram caused a decrease in production performance and tibia parameters (p < 0.05), which were significantly reversed by Rg1 administration. In addition, the results from the histological evaluation showed that the proliferative zone had a smaller number of blood vessels, surrounded by inviable chondrocytes, proving apoptosis during the occurrence of TD, while Rg1 treatment significantly increased blood vessels and decreased apoptotic cells. Furthermore, it was found that Rg1 effectively ameliorated the angiogenesis by regulation of HIF-1α/VEGFA/VEGFR2 signaling pathway and the chondrocytes' apoptosis via the mitochondrial pathway. Hence, these findings suggest that Rg1 might be a perfect choice in the prevention and treatment of TD via regulating chondrocytes apoptosis and angiogenesis. Also, it might be a potential therapeutic drug for humans to overcome different bone disorders, involving chondrocytes.

Advances in Biopolymeric Nanopesticides: A New Eco-Friendly/Eco-Protective Perspective in Precision Agriculture

Pesticides are essential to contemporary agriculture and are required to safeguard plants from hazardous pests, diseases, and weeds. In addition to harming the environment, overusing these pesticides causes pests to become resistant over time. Alternative methods and agrochemicals are therefore required to combat resistance. A potential solution to pesticide resistance and other issues may be found in nanotechnology. Due to their small size, high surface-area-to-volume ratio, and ability to offer novel crop protection techniques, nanoformulations, primarily biopolymer-based ones, can address specific agricultural concerns. Several biopolymers can be employed to load pesticides, including starch, cellulose, chitosan, pectin, agar, and alginate. Other biopolymeric nanomaterials can load pesticides for targeted delivery, including gums, carrageenan, galactomannans, and tamarind seed polysaccharide (TSP). Aside from presenting other benefits, such as reduced toxicity, increased stability/shelf life, and improved pesticide solubility, biopolymeric systems are also cost-effective; readily available; biocompatible; biodegradable; and biosafe (i.e., releasing associated active compounds gradually, without endangering the environment) and have a low carbon footprint. Additionally, biopolymeric nanoformulations support plant growth while improving soil aeration and microbial activity, which may favor the environment. The present review provides a thorough analysis of the toxicity and release behavior of biopolymeric nanopesticides for targeted delivery in precision crop protection.

Development of biochar-impregnated alginate beads for the delivery of biocontrol agents for peanut aflatoxin

The competitive inhibition of aflatoxigenic fungi by non-aflatoxigenic Aspergillus flavus has proved to be an effective method to prevent and control peanut aflatoxin contamination, and most of the currently used inoculum carriers are grains. In this study, the reliability and efficiency of replacing grain kernels with novel chitosan-coated alginate-poly(N-isopropylacrylamide) (PNIPAAm) beads impregnated with biochar (CSACB) were evaluated. Characterisation of the beads was performed by SEM, thermogravimetry analysis (TGA), and swelling properties analyses. The optimised CSACB beads had good physical stability, shelf life, and entrapment efficiency. In addition, the water-holding capacity and porous structure were excellent, as the biochar provided a beneficial microenvironment for the attachment and microbial growth of the biocontrol fungus. The effect of reducing aflatoxin in peanuts was verified experimentally. Collectively, the novel CSACB beads are suitable carriers of non-aflatoxigenic A. flavus for the biocontrol of peanut aflatoxin.

Potentiated inhibition of Trichoderma virens and other environmental fungi by new biocide combinations

Abstract

Fungi cause diverse, serious socio-economic problems, including biodeterioration of valuable products and materials that spawns a biocides industry worth ~$11 billion globally. To help combat environmental fungi that commonly colonise material products, this study tested the hypothesis that combination of an approved fungicide with diverse agents approved by the FDA (Food and Drug Administration) could reveal potent combinatorial activities with promise for fungicidal applications. The strategy to use approved compounds lowers potential development risks for any effective combinations. A high-throughput assay of 1280 FDA-approved compounds was conducted to find those that potentiate the effect of iodopropynyl-butyl-carbamate (IPBC) on the growth of Trichoderma virens; IPBC is one of the two most widely used Biocidal Products Regulations–approved fungicides. From this library, 34 compounds in combination with IPBC strongly inhibited fungal growth. Low-cost compounds that gave the most effective growth inhibition were tested against other environmental fungi that are standard biomarkers for resistance of synthetic materials to fungal colonisation. Trifluoperazine (TFZ) in combination with IPBC enhanced growth inhibition of three of the five test fungi. The antifungal hexetidine (HEX) potentiated IPBC action against two of the test organisms. Testable hypotheses on the mechanisms of these combinatorial actions are discussed. Neither IPBC + TFZ nor IPBC + HEX exhibited a combinatorial effect against mammalian cells. These combinations retained strong fungal growth inhibition properties after incorporation to a polymer matrix (alginate) with potential for fungicide delivery. The study reveals the potential of such approved compounds for novel combinatorial applications in the control of fungal environmental opportunists.

Key points

• Search with an approved fungicide to find new fungicidal synergies in drug libraries.

• New combinations inhibit growth of key environmental fungi on different matrices.

• The approach enables a more rapid response to demand for new biocides.

Supplementary Information

The online version contains supplementary material available at 10.1007/s00253-021-11211-3.

Mechanical properties of starch-filled alginate gel particles

The aim of this work was to investigate the mechanical behaviour of alginate-based composite particles. Alginate gel beads with entrapped starch were used as the replicates of storage cells of plant tissue. Beads were formulated using different ratios of both ingredients and were produced using two methods, resulting in particles in the macro- and micro-scale size range. Compression tests revealed an effect of bead size on mechanical properties and a dominant role of the alginate on the material properties. Starch was successfully encapsulated as native granules in the beads and once encompassed, it suffered restricted swelling, up to 45 % of its original size, after undergoing heating. Force versus displacement data were fitted to both an empirical and the Hertz model and Young's modulus was found to increase only with heated starch inclusions. Microscopy was deemed crucial for the interpretation of mechanical measurements.

Encapsulation of wheat germ oil in alginate-gelatinized corn starch beads: Physicochemical properties and tocopherols' stability

Microencapsulation by production of polymer beads from ionic gelation is a useful method to improve the stability of nutritional compounds. Wheat germ oil is a nutritional source of unsaturated fatty acids and phytonutrients, such as tocopherols (α and β), phytosterols, carotenoids, and phenolic compounds. This work studied the development of alginate-starch beads over the stability of encapsulated wheat germ oil. The beads contained sodium alginate and gelatinized corn starch in proportions of 2:0, 1:1, 1:2, and 1:4. The addition of small amounts (1:1) of gelatinized starch in the alginate emulsions improved the physicochemical properties and stability during storage. The emulsions had oil droplets with mean sizes ranging from 4.5 to 12.2 µm. The 1:1 samples showed more disperse oil droplets, explained by the molecular interaction between the starch chains and oil. The encapsulation efficiency was higher than 91%, and the beads' mean diameters were between 383.22 and 797.45 µm. The proportion of 1:1 alginate-starch also enhanced the beads' microstructures, avoiding oil oxidation. Six days accelerated stability (65 °C) evidenced higher tocopherols amounts (0.66 mg/g oil) and a lower oxidation (2.52 meq.O₂ /kg oil) for the 1:1 samples compared to the remained samples. PRACTICAL APPLICATION: Alginate-gelatinized corn starch beads loaded with wheat germ oil can be used as an ingredient in functional food products for the enrichment of nutrients. The use of starch decreased the oil oxidation and the loss of tocopherols during storage, indicating that the quality of the wheat germ oil will be desirable for longer durations of food storage.

Alginate-based hydrogels modified with olive pomace and lignin to removal organic pollutants from aqueous solutions

In this study, new hybrid biopolymers based on alginate and low cost materials belong lignocellulose group such as lignin and olive pomace were used to removal organic pollutants. The organic carbon content, granule size, average mass, zero charge point, water uptake and swelling of the resulting alginate-based modified adsorbents were measured. The homogeneity, complexity and encapsulation viability of the novel biopolymers were studied by FT-IR, TGA and SEM. As model of emerging contaminants belong to glucocorticoids group prednisolone drug was selected. 3,4-dichloroaniline (3,4-DCA) was chosen as aniline derivate pollutant. The efficiency of the bioadsorbents to removal 3,4-dichloroaniline and prednisolone was performed by kinetic and equilibrium batch adsorption studies. The experimental data was found well correlated to the pseudo-second order kinetic model. The adsorption of 3,4-DCA and prednisolone was mainly affected by the organic carbon content of the bioadsorbent. A higher adsorption capacity was observed for lignin-alginate based bioadsorbents. The removal efficiency was higher than 90% for 3,4-DCA in all prepared bioadsorbents, reached up to 49% for prednisolone using the bioadsorbent with the higher lignin content. These results suggest the promising potential for the prepared eco-friendly bioadsorbents to removal organic pollutants from water, mainly for aniline derivate such as 3,4-DCA.

Detect, remove and re-use: Sensing and degradation pesticides via 3D tilted ZMRs/Ag arrays

The objective of this study was to design a versatile and reusable pesticide detection surface-enhanced Raman scattering (SERS) substrate in combination with SERS enhancement and self-cleaning properties. In this paper, we present an inexpensive way to synthesize three-dimensional tilted ZnO micron rods with an Ag hierarchical structure (ZMRs/Ag arrays). Although expensive materials and complex methods were not used, the detection limit of thiram residue was 10^-11 M, with a quantitative relationship (R² = 0.9929) between the thiram concentration and the intensity of the SERS peaks. Additionally, the substrates exhibited fast and efficient photocatalytic activity for the degradation of adsorbed thiram, and the degradation rate in 30 min was close 100 % under visible-light irradiation. The enhancement and photocatalytic mechanism of this substrate were meticulously analyzed in detail. Furthermore, the residues of several mixed pesticides (e.g., thiram and methamidophos compounds) in various juices (such as grape, pear, orange, apple, and cherry juices) were quickly detected using ZMRs/Ag substrates. The main advantages of this substrate are recyclability, stability, selectivity, handiness, and cost-eff ;ectiveness. The substrate can prevent single-use problems associated with conventional SERS substrates and can be applied in pesticide residue and food security.

Nanocomposites for Delivering Agrochemicals: A Comprehensive Review

Excessive application of fertilizers negatively affects soil health, causes low nutrient utilization efficiency in plants, and leads to environmental pollution. The application of controlled-release fertilizer is gaining momentum to overcome this crisis. Engineered nanocomposites (ENCs) have shown tremendous promise for need-based delivery of agrochemicals (macro- and micronutrients, pesticides, and other agrochemicals). This review provides comprehensive coverage of synthesis of nanocomposites, their physical-chemical characterization, and techniques to achieve sustained release and targeted delivery to the crops, emphasizing their beneficial role in plant production and protection. Related aspects like feasibility of the application, commercialization of the nanoformulations, and biosafety concerns are also highlighted. This will be helpful to develop a critical understanding of the current state of the art in the controlled release of agrochemicals through nanocomposites. The pressing issues like scale up production, cost analyses, field-based trials, and environmental safety concerns should be given greater attention in future studies.

Thermosensitive Hydrogel for Encapsulation and Controlled Release of Biocontrol Agents to Prevent Peanut Aflatoxin Contamination

Starch, alginate, and poly(N-isopropylacrylamide) (PNIPAAm) were combined to prepare a semi-interpenetrating network (IPN) hydrogel with temperature sensitivity. Calcium chloride was used as cross-linking agent, the non-toxigenic Aspergillus flavus spores were successfully encapsulated as biocontrol agents by the method of ionic gelation. Characterization of the hydrogel was performed by Fourier-transform infrared spectroscopy (FTIR), scanning electron micrograph (SEM), and thermogravimetry analysis (TGA). Formulation characteristics, such as entrapment efficiency, beads size, swelling behavior, and rheological properties were evaluated. The optical and rheological measurements indicated that the lower critical solution temperature (LCST) of the samples was about 29-30 °C. TGA results demonstrated that the addition of kaolin could improve the thermal stability of the semi-IPN hydrogel. Morphological analysis showed a porous honeycomb structure on the surface of the beads. According to the release properties of the beads, the semi-IPN hydrogel beads containing kaolin not only have the effect of slow release before peanut flowering, but they also can rapidly release biocontrol agents after flowering begins. The early flowering stage of the peanut is the critical moment to apply biocontrol agents. Temperature-sensitive hydrogel beads containing kaolin could be considered as carriers of biocontrol agents for the control of aflatoxin in peanuts.

Reinforcement of Polycaprolactone/Chitosan with Nanoclay and Controlled Release of Curcumin for Wound Dressing

A novel clay-reinforced polycaprolactone/chitosan/curcumin (PCl/CS/Clay/Cur) composite film was fabricated in this study. The prepared Cur-loading composite films were characterized with attenuated total reflection Fourier transformed infrared spectroscopy, scanning electron microscopy, atomic force microscopy, water contact angle, differential scanning calorimetry, thermogravimetric analysis, and X-ray diffraction, and the results showed good dispersion of clay in the composite films. The addition of nanoclay was found to significantly increase the tensile strength. Also, the clay-enhanced drug-loading films exhibited better controlled-release profiles of Cur than those membranes without clay. Skin disinfection test demonstrated that the curcumin-loaded film could protect wound from bacterial infection. Cytotoxicity analysis proved the good biocompatibility of the composite films. The clay-enhanced Cur-loading films might be promising candidates for wound care.

Release-controlled microcapsules of thiamethoxam encapsulated in beeswax and their application in field

Using beeswax as wrapping matrix, two types of release-controlled TM (thiamethoxam)/BK(beeswax-kaolin) microcapsules were prepared by adsorbing TM on kaolin and then encapsulated with beeswax, or directly wrapping TM with beeswax. The structure and morphology of the TM/BK microcapsules were characterized. The effects of different preparation methods, the particle size, pH conditions and different additives on the release property of the TM/BK microcapsules were investigated in water and soil column to compare the advantages of the two approaches. Finally, the insecticidal effect of the TM/BK microcapsules against sugarcane borer and rice planthopper was tested. The results show that the TM/BK microcapsules have a better sustained-release in both water and soil, and the release rate is different under different pH conditions. In addition, the releasing time of the TM/BK microcapsules can be modified by different preparation methods and combination of different additives. In the field applications, the insecticidal activity of the TM/BK microcapsules was better than that of non-sustained control group. Especially in the rice field test, 45 days after the application, the control group lost the activity against rice planthopper because of drug loss, whereas the TM/BK microcapsule group still retained about 90% of the insecticidal activity. The results suggest that the microcapsules have better agricultural application for insect control.

Controlled Release of Biological Control Agents for Preventing Aflatoxin Contamination from Starch⁻Alginate Beads

For the wise use of fungal biocontrol and metalaxyl fungicide, starch-alginate-based formulations have been developed by encapsulating metalaxyl and non-toxigenic Aspergillus flavus spores simultaneously in the form of microspheres using calcium chloride as a cross-linking agent. The formulations were characterized by Fourier transform infrared spectroscopy (FTIR), a scanning electron micrograph (SEM), and thermogravimetry (TGA). Formulation characteristics, including the bead size, entrapment efficiency, swelling ratio of the beads, and rheological properties, were analyzed. The release behavior of beads with different formulations was evaluated. The addition of kaolin and rice husk powder in starch-alginate beads retarded the release profile of spores and metalaxyl. The release of the active ingredient from starch-alginate-kaolin beads and starch-alginate-rice husk powder beads occurred in both a controlled and sustained manner. Additionally, the release rate decreased with the increase of kaolin or rice husk powder content. The beads added with kaolin were slower than the release of rice husk powder. In comparison, spores released slower and lasted longer than metalaxyl. The starch-alginate-kaolin formulations could be used as controlled release material in the field of biocontrol and reduce the harm of fungicides to the environment.

Synthesis and Insecticidal Activity of Enzyme-Triggered Functionalized Hollow Mesoporous Silica for Controlled Release

In the present study, enzymatic responsive controlled release formulations (CRFs) were fabricated. The CRFs were achieved by anchoring mechanically interlocked molecules using α-cyclodextrin onto the surface pore rims of hollow mesoporous silica (HMS). The CRFs were characterized using Fourier transform infrared spectroscopy, scanning electron microscopy, transmission electron microscopy, and thermogravimetric analysis. The results showed that the CRFs had extraordinary loading ability for chlorantraniliprole (42% w/w) and could effectively preserve chlorantraniliprole against degradation under thermal conditions and UV radiation. The CRFs have been proven to be enzyme-sensitive. The release ratio of chlorantraniliprole from CRFs can be accelerated observably when external α-amylase was introduced. The persistence of CRFs was evaluated by regular sampling feeding experiment using Plutella xylostella as the target insect. The results showed that the larval mortality of P. xylostella was much higher than that of Coragen under all concentrations after 14 days, which proved that CRFs had remarkable persistence.

A bioencapsulation and drying method increases shelf life and efficacy of Metarhizium brunneum conidia

This study reports the development of encapsulated and dried entomopathogenic fungus Metarhiuzm brunneum with reduced conidia content, increased conidiation, a high drying survival and enhanced shelf life. Dried beads prepared with the fillers corn starch, potato starch, carboxymethylcellulose or autoclaved baker's yeast, showed enhanced survival with increasing filler content. The maximum survival of 82% was found for beads with 20% corn starch at <0.1 water activity. While increasing starch content inhibits the conidiation, autoclaved baker's yeast and a combination with starch enhanced the conidiation to 1.0 × 10⁸ conidia/bead. Beads with conidia content reduced to 0.01% multiplied conidia in a "microfermentation" by the factor 1000. A bioassay confirmed that conidia formed from rehydrated beads were virulent against Tenebrior molitor larvae. After six months of storage, encapsulated conidia showed improved shelf life compared to non-formulated conidia. This "microfermenter" will pave the way for encapsulated fungi to be used as cost-effective biocontrol agents.

Synthesis and antimicrobial properties of Zn-mineralized alginate nanocomposites

New bioactive and antimicrobial biomaterials were produced by alginate-mediated biomineralization with Zn-mineral phase. The synthesis procedure is simple, cost-effective and resulted in two different Zn-mineralized alginate nanocomposites, Zn-carbonate/Zn-alginate and Zn-phosphate/Zn-alginate. The presence of Zn-mineral phase and its type, have significantly affected nanocomposite morphology, stability, total metallic loading and potential to release Zn(II) in physiological environment. Antimicrobial experiments showed that both types of Zn-mineralized nanocomposites exhibit strong antimicrobial effect against Escherichia coli, Staphylococcus aureus and Candida albicans. These results suggest that alginate biomineralization, where minerals are salts of essential metallic ions like Zn(II), represents a good strategy for designing multifunctional biomaterials for potential biomedical applications.

Evaluation of released malathion and spinosad from chitosan/alginate/gelatin capsules against Culex pipiens larvae

Efficacy of spinosad and malathion loaded in eco-friendly biodegradable formulations was evaluated for controlling Culex pipiens larvae. Malathion (organophosphorus larvicide) and spinosad (naturally derived insecticide) were loaded on chitosan/alginate/gelatin capsules. Capsules were characterized by size measurement, scanning electron microscopy, Fourier transform infrared spectroscopy, and water uptake. In vitro release kinetics of the larvicides was studied in the running and stagnant water. Biochemical studies on the larvae treated with technical and formulated insecticides were also demonstrated. The results indicated that the released spinosad was active for a long time up to 48 and 211 days in the running and stagnant water, respectively. However, the capsules loaded with malathion showed larvicidal activity for 20 and 27 days in the running and stagnant water, respectively. Technical and formulated malathion and spinosad had an inhibition effect on acetylcholinesterase, carboxylesterase, and glutathione S-transferase. The results proved that the prepared capsules consisting of biodegradable polymers containing larvicides could be effective as controlled-release formulation against C. pipiens larvae for a long period.

Polymeric and Solid Lipid Nanoparticles for Sustained Release of Carbendazim and Tebuconazole in Agricultural Applications

Carbendazim (MBC) (methyl-2-benzimidazole carbamate) and tebuconazole (TBZ) ((RS)-1-(4-chlorophenyl)-4,4-dimethyl-3-(1H-1,2,4-triazol-1-ylmethyl)pentan-3-ol) are widely used in agriculture for the prevention and control of fungal diseases. Solid lipid nanoparticles and polymeric nanocapsules are carrier systems that offer advantages including changes in the release profiles of bioactive compounds and their transfer to the site of action, reduced losses due to leaching or degradation, and decreased toxicity in the environment and humans. The objective of this study was to prepare these two types of nanoparticle as carrier systems for a combination of TBZ and MBC, and then investigate the release profiles of the fungicides as well as the stabilities and cytotoxicities of the formulations. Both nanoparticle systems presented high association efficiency (>99%), indicating good interaction between the fungicides and the nanoparticles. The release profiles of MBC and TBZ were modified when the compounds were loaded in the nanoparticles, and cytotoxicity assays showed that encapsulation of the fungicides decreased their toxicity. These fungicide systems offer new options for the treatment and prevention of fungal diseases in plants.

Microorganism-based monodisperse microcapsules: encapsulation of the fungicide tebuconazole and its controlled release properties

A controlled release system was prepared, it based on UF modified PCC cells in which TEB are loaded into cells. It can control the drug release rate, depress the initial “burst effect”, and was efficacious in controlling wheat powdery mildew.

Controlled pesticide release from biodegradable polymers

Polymers have been widely used in agriculture for applications including controlled release of pesticides and other active ingredients. The ability to predict their delivery helps avoid environmental hazards. Macromolecular matrices used as carriers in controlled release of agricultural active agents, especially pesticides, are reviewed. The review focuses on the advantages and mechanisms of controlled release. It includes biodegradable polymers in agriculture, their manufacturing methods, and their degradation mechanisms and kinetics. The article also presents a critical account of recent release studies and considers upcoming challenges.

Mobility and efficacy of 2,4-D herbicide from slow-release delivery systems based on organo-zeolite and organo-bentonite complexes

This research aimed to develop slow-release formulations (SRFs) of 2,4-dichlorophenoxyacetic acid (2,4-D) using zeolite and bentonite minerals modified with cetyltrimethylammonium (CTMA) surfactant. Adsorption-desorption, greenhouse bioassay and column experiments were carried out to assess the potential of the SRFs to control weeds while reducing the herbicide leaching losses to deep layers of soil. The results showed that only 6.5 mmol 2,4-D kg(-1) was retained by Na-bent, and the herbicide was not adsorbed by Na-zeol at all. The surface modification with CTMA surfactant, however, improved the 2,4-D adsorption capacity of the zeolite and bentonite up to 207.5 and 415.8 mmol kg(-1), respectively. The synthesized organo-minerals slowly released the retained 2,4-D discharging 22 to 64% of the adsorbed 2,4-D to the solution phase within 7 days. The SRFs significantly (P = 0.05) reduced the herbicide mobility within the soil columns keeping a great portion of the herbicide active ingredient in the upper 5 cm soil layer. The SRFs were significantly (P = 0.05) as effective as the free technical herbicide in weed control without harming the ryegrass as the main plant. Therefore, the synthesized SRFs could be considered as useful tools for weed control in sustainable agriculture.

Adsorption-desorption behavior of 2,4-D on NCP-modified bentonite and zeolite: implications for slow-release herbicide formulations

Clay minerals have obtained considerable attention for slow-release formulation of herbicides to increase weed control efficacy and reduce leaching potential and environmental pollution. This study deals with preparing, characterizing and examining the potentials of modified bentonite and zeoilite in adsorption and release of 2,4-dichlorophenoxyacetic acid (2,4-D) herbicide. 2,4-D sorption of the N-cetylpyridinium (NCP)-modified bentonites and zeolites were much higher than those of unmodified substrates. The 2,4-D adsorption capacity of the organo-minerals increased with increasing surfactant loading. Desorption isotherms of 2,4-D did not coincide their corresponding sorption isotherms showing hysteresis. The proportion of 2,4-D released from the organo-minerals after seven desorption cycles varied between 29% and 50% of the total retained herbicide. The sorbed 2,4-D on the adsorbents showed gradual release pattern with time. The release pattern of 2,4-D from NCP-modified bentonite and zeolite, make these synthetic organo-minerals suitable candidate for slow release formulation of 2,4-D.

Controlling pesticide release via structuring agropolymer and nanoclays based materials

The potential use of nanoclays for modulating transfer properties of active agents in bio-sourced polymers was explored. For this purpose, new pesticide formulations were designed by combining wheat gluten, ethofumesate (model pesticide) and three montmorillonites (MMT) using a bi-vis extrusion process. Controlled release properties, evaluated through release experiments in water, were discussed in relation to the material formulations and their resulting structure. Partition coefficients were calculated from experimental data and diffusivity values were identified with a Fick's second law mechanistic model. The effect of temperature on release pattern was also evaluated and the activation energy of diffusion was determined. Ethofumesate release was slowed down for all wheat gluten based-formulations as compared to the commercial product. This slow release effect was increased in the presence of hydrophobic MMTs, due to a higher affinity for ethofumesate than for wheat gluten. Contrarily, hydrophilic MMT, displaying a greater affinity for wheat gluten than for ethofumesate seemed ineffective to slow down its release despite the tortuous pathway achieved through a well-exfoliated structure. To conclude, the release mechanisms would be rather governed by pesticide/MMT interactions than MMT/polymer matrix in the case of a hydrophobic pesticide such as ethofumesate and a hydrophilic matrix such as wheat gluten.

Encapsulation of R. planticola Rs-2 from alginate-starch-bentonite and its controlled release and swelling behavior under simulated soil conditions

The plant growth-promoting bacteria (PGPR) Raoultella planticola Rs-2 was encapsulated with the various blends of alginate, starch, and bentonite for development of controlled-release formulations. The stability and release characteristics of these different capsule formulations were evaluated. The entrapment efficiency of Rs-2 in the beads (capsules) was more than 99%. The diameter of dry beads ranged from 0.98 to 1.41 mm. The bacteria release efficiency, swelling ratio, and biodegradability of the different bead formulations were enhanced by increasing the starch or alginate contents, but were impeded by higher bentonite content. The release kinetics of viable cells from capsules and the swelling ratio of capsules were studied in simulated soil media of varying temperature, moisture, pH, and salt content. The release of loaded Rs-2 cells and swelling of capsules are greatly affected by moisture, temperature, pH and salt content of the release medium. The release of viable Rs-2 cells from capsules was positively associated with the swelling properties of the capsules. The release of Rs-2 cells occurred through a Case II diffusion mechanism. In summary, this work indicates that alginate-starch-bentonite blends are a viable option for the development of efficient controlled-release formulations of Rs-2 biofertilizer, and which could have a promising application in natural field conditions.