Facile preparation of Ni(OH)2-MnO2 hybrid material and its application in the electrocatalytic oxidation of hydrazine

Electrodeposition of silver onto carbon graphite and their catalysis properties toward thiamethoxam reduction: application in food and beverage samples

The purpose of this paper is the electrodeposition of silver particles on graphite electrode (Ag@GrCE) using chronoamperometry and the use of this electrode for the determination of thiamethoxam. The electrode was prepared by chronoamperometry and characterized by X-Ray diffraction (XRD), fourier transform infrared spectroscopy (FT-IR), EDX analysis and electrochemical impedance spectroscopy. The obtained electrode exhibits excellent electrocatalytic activity toward thiamethoxam reduction. The voltammetric response was linear as function of TXM concentration with a limit of detection around to 1.92 × 10⁻⁶ mol L⁻¹. The proposed electrode was successfully used to analyze thiamethoxam residue in some food samples including orange and tomato juices.

Birnessite based nanostructures for supercapacitors: challenges, strategies and prospects

In the past few years, intensive attention has been focused on birnessite based electrodes for supercapacitors. Much progress has been achieved in developing birnessite based nanostructures with high electrochemical performance. However, challenges still remain in taking full advantage of birnessite and building smart structures to overcome the gap between the obtained capacitance and its theoretical capacitance. In this review, the basic information on birnessite and its preparation strategies are summarized and the current challenges are put forward. Finally, some new strategies for preparing high electrochemical performance birnessite based nanostructures are highlighted.

MOFs-Derived Nano-CuO Modified Electrode as a Sensor for Determination of Hydrazine Hydrate in Aqueous Medium

It very important to be able to efficiently detect hydrazine hydrate in an aqueous medium due to its high toxicity. Here, we have proposed a new idea: to construct a sensor for the rapid determination of hydrazine hydrate based on the nano-CuO derived by controlled pyrolysis of HKUST-1 [Cu3(BTC)2(H2O)3]. The as-prepared CuO at 400 °C possesses a uniform appearance with nano-structure via SEM images, and the nano-CuO-400 has exhibited excellent electrocatalytic activity towards hydrazine oxidation. Amperometric i-t curves shows the peak current as linearly proportional to the hydrazine concentration within 1.98-169.3 μmol L-1 and 232-2096 μmol L-1 with the detection limit of 2.55 × 10-8 mol L-1 and 7.01 × 10-8 mol L-1, respectively. Moreover, the sensor constructed in the experiment shows good selectivities, and it is feasible to determining actual water samples.

Construction of manganese oxide nanowire-like cluster arrays on a DNA template: Application to detection of hydrogen peroxide

Improved electron transfer properties and catalytic activity of manganese oxide (MnOx) was demonstrated following its electrochemical deposition on a deoxyribonucleic acid (DNA) modified glassy carbon electrode. The MnOx showed different morphologies, electrocatalytic properties and electrochemical kinetics. Scanning electron microscopy showed that electrodeposition of MnOx on a bare glassy carbon electrode led to the formation of irregular-shapes while a nanowire cluster (NWC) was formed on a GCE/DNA due to the DNA serving as a template. Electrochemical impedance spectroscopy (EIS) revealed lower charge transfer resistance of the MnOxNWC compared with MnOx. A new mechanism is presented for the electrodeposition of MnOx on the surface of a GC/DNA electrode. An electrochemical biosensor was fabricated based on depositing MnOx onto a glassy carbon /DNA electrode (GCE/DNA/MnOxNWC) and was used to detect hydrogen peroxide (H₂O₂). The MnOx nanowire cluster and DNA exhibited significant electrocatalytic activity for simultaneous electrocatalytic oxidation at two oxidation potentials (0.6 V and 0.98 V vs Ag/AgCl) and one reduction potential (-0.5 V vs Ag/AgCl) for H₂O₂ at pH 6.0. A new mechanism for the detection of H₂O₂ is presented. Excellent electrocatalytic activity, stability and facility for simultaneous detection of H₂O₂ at different of applied potentials are proposed advantages of the proposed electrochemical biosensor.

Selective hydrazine sensor fabrication with facile low-dimensional Fe2O3/CeO2 nanocubes

Here, the binary-doped metal oxides of Fe₂O₃/CeO₂ nanocubes were prepared using reliable hydrothermal process, which is applied to fabricate an efficient and selective hydrazine chemical sensor shows good analytical sensing performances as well as validated the sensor prove with the environmental and extracted real samples.

Ruthenium Nanoparticles Decorated Tungsten Oxide as a Bifunctional Catalyst for Electrocatalytic and Catalytic Applications

The syntheses of highly stable ruthenium nanoparticles supported on tungsten oxides (Ru-WO₃) bifunctional nanocomposites by means of a facial microwave-assisted route are reported. The physicochemical properties of these Ru-WO₃ catalysts with varied Ru contents were characterized by a variety of analytical and spectroscopic methods such as XRD, SEM/TEM, EDX, XPS, N₂ physisorption, TGA, UV-vis, and FT-IR. The Ru-WO₃ nanocomposite catalysts so prepared were utilized for electrocatalytic of hydrazine (N₂H₄) and catalytic oxidation of diphenyl sulfide (DPS). The Ru-WO₃-modified electrodes were found to show extraordinary electrochemical performances for sensitive and selective detection of N₂H₄ with a desirable wide linear range of 0.7-709.2 μM and a detection limit and sensitivity of 0.3625 μM and 4.357 μA μM^-1 cm^-2, respectively, surpassing other modified electrodes. The modified GCEs were also found to have desirable selectivity, stability, and reproducibility as N₂H₄ sensors, even for analyses of real samples. This is ascribed to the well-dispersed metallic Ru NPs on the WO₃ support, as revealed by UV-vis and photoluminescence studies. Moreover, these Ru-WO₃ bifunctional catalysts were also found to exhibit excellent catalytic activities for oxidation of DPS in the presence of H₂O₂ oxidant with desirable sulfoxide yields.

Co3O4 nanoparticles/MWCNTs composites: a potential scaffold for hydrazine and glucose electrochemical detection

We report the successful formation of cobalt oxide (Co₃O₄) nanoparticles/multi-walled carbon nanotubes (Co₃O₄/MWCNTs) composites as efficient electrocatalytic materials for chemical sensing.

An electrochemical sensor highly selective for lindane determination: a comparative study using three different α-MnO2 nanostructures

Here we describe the electrochemical detection of lindane on α-MnO₂ nanostructures.

Copper nanoparticles decorated polyaniline–zeolite nanocomposite for the nanomolar simultaneous detection of hydrazine and phenylhydrazine

The high electrocatalytic activity of the CuNPs–PANI–Nano-ZSM-5 nanocomposite can be attributed to the synergistic contribution provided by the highly dispersed copper nanoparticles and conductive PANI film on high surface area Nano-ZSM-5.

A novel non-enzymatic lindane sensor based on CuO-MnO2 hierarchical nano-microstructures for enhanced sensitivity

In this work, we present new results about the non-enzymatic detection of lindane by using CuO-MnO2 hierarchical nano-microstructures. The linear range for the determination of lindane is up to 700 μM with a limit of detection of 4.8 nM, which is much lower than for other non-enzymatic lindane sensors.

A novel gold nanoparticle decorated nanocrystalline zeolite based electrochemical sensor for the nanomolar simultaneous detection of cysteine and glutathione

High electrocatalytic activity of the sensor can be attributed to the highly dispersed gold nanoparticles on the nanocrystalline zeolite matrix.

Amorphous PtNiP particle networks of different particle sizes for the electro-oxidation of hydrazine

Amorphous PtNiP particle networks with different particle sizes prepared via the reaction temperature control method showed high catalytic activity for hydrazine oxidation compared to the Pt and PtNi catalysts due to its porous, amorphous structure.