Macrocyclic receptors immobilized to monodisperse porous polymer particles by chemical grafting and physical impregnation for strontium capture: a comparative study

Phosphination of amino-modified mesoporous silica for the selective separation of strontium

Radioactive strontium (90Sr) is considered as one of the most dangerous radionuclides due to its high biochemical toxicity. For the efficient and selective separation of Sr from acidic environments, a novel functional adsorbent CEPA@SBA-15-APTES was prepared in this work through the phosphorylation of amino-modified mesoporous silica with organic content of approximately 20 wt%. CEPA@SBA-15-APTES was characterized by TEM, SEM, EDS, TG-DSC, BET, FTIR, and XPS techniques, revealing its characteristics of an ordered hexagonal lattice-like structure and rich functional groups. The experimental results demonstrated that the adsorbent exhibited good adsorption capacity for Sr over a wide acidity range (i.e., from 10-10 M to 4 M HNO3). The adsorption equilibriums of Sr by CEPA@SBA-15-APTES in 10-6 M and 3 M HNO3 solutions were reached within 30 and 5 min, respectively, and the adsorption capacities at 318 K were 112.6 and 71.8 mg/g, respectively. Furthermore, by combining the experimental and characterization results, we found that the adsorption mechanism consisted of ion exchange between Sr(II) and H+ (in P-OH) in the 10-6 M HNO3 solution and coordination between the Sr(II) and oxygen-containing (CO and P = O) functional groups in the 3 M HNO3 solution.

A review of microbial fuel cell and its diversification in the development of green energy technology

The advancement of microbial fuel cell technology is rapidly growing, with extensive research and well-established methodologies for enhancing structural performance. This terminology attracts researchers to compare the MFC devices on a technological basis. The architectural and scientific successes of MFCs are only possible with the knowledge of engineering and technical fields. This involves the structure of MFCs, using substrates and architectural backbones regarding electrode advancement, separators and system parameter measures. Knowing about the MFCs facilitates the systematic knowledge of engineering and scientific principles. The current situation of rapid urbanization and industrial growth is demanding the augmented engineering goods and production which results in unsolicited burden on traditional wastewater treatment plants. Consequently, posing health hazards and disturbing aquatic veracity due to partial and untreated wastewater. Therefore, it's sensible to evaluate the performance of MFCs as an unconventional treatment method over conventional one to treat the wastewater. However, MFCs some benefits like power generation, stumpy carbon emission and wastewater treatment are the main reasons behind the implementation. Nonetheless, few challenges like low power generation, scaling up are still the major areas needs to be focused so as to make MFCs sustainable one. We have focused on few archetypes which majorities have been laboratory scale in operations. To ensure the efficiency MFCs are needed to integrate and compatible with conventional wastewater treatment schemes. This review intended to explore the diversification in architecture of MFCs, exploration of MFCs ingredients and to provide the foreseen platform for the researchers in one source, so as to establish the channel for scaling up the technology. Further, the present review show that the MFC with different polymer membranes and cathode and anode modification presents significant role for potential commercial applications after change the system form prototype to pilot scale.

Phytotoxicity of radionuclides: A review of sources, impacts and remediation strategies

Various anthropogenic activities and natural sources contribute to the presence of radioactive materials in the environment, posing a serious threat to phytotoxicity. Contamination of soil and water by radioactive isotopes degrades the environmental quality and biodiversity. They persist in soils for a considerable amount of time and disturb the fauna and flora of any affected area. Hence, their removal from the contaminated medium is inevitable to prevent their entry into the food chain and the organisms at higher levels of the food chain. Physicochemical methods for radioactive element remediation are effective; however, they are not eco-friendly, can be expensive and impractical for large-scale remediation. Contrastingly, different bioremediation approaches, such as phytoremediation using appropriate plant species for removing the radionuclides from the polluted sites, and microbe-based remediation, represent promising alternatives for cleanup. In this review, sources of radionuclides in soil as well as their hazardous impacts on plants are discussed. Moreover, various conventional physicochemical approaches used for remediation discussed in detail. Similarly, the effectiveness and superiority of various bioremediation approaches, such as phytoremediation and microbe-based remediation, over traditional approaches have been explained in detail. In the end, future perspectives related to enhancing the efficiency of the phytoremediation process have been elaborated.

One-Pot Environmentally Friendly Synthesis of Nanomaterials Based on Phytate-Coated Fe3O4 Nanoparticles for Efficient Removal of the Radioactive Metal Ions 90Sr, 90Y and (UO2)2+ from Water

We report the fast (three minutes) synthesis of green nanoparticles based on nanoparticles coated with the natural organic receptor phytate for the recognition and capture of ⁹⁰Sr, ⁹⁰Y, and (UO₂₎²⁺. The new material shows excellent retention for (UO₂)²⁺, 97%; these values were 73% and 100% for ⁹⁰Sr and ⁹⁰Y, respectively. Recovery of the three radioactive metal ions occurs through a non-competitive process. The new hybrid material is harmless, easy to prepare, and immobilizes these radioactive contaminants in water with great efficiency.

Effects of Impregnated Amidophosphonate Ligand Concentration on the Uranium Extraction Behavior of Mesoporous Silica

A series of solid-phase uranium extractants were prepared by post-synthesis impregnation of a mesoporous silica support previously functionalized with octyl chains by direct silanization. Five materials were synthesized with 0, 0.2, 0.3, 0.4 and 0.5 mmol of the amidophosphonate ligand DEHCEBP per gram of functionalized solid, and the effect of the ligand concentration on the uranium extraction efficiency and selectivity of the materials was investigated. Nitrogen adsorption–desorption data show that with increasing ligand loadings, the specific surface area and average pore volume decrease as the amidophosphonate ligand fills first the micropores and then the mesopores of the support. Acidic uranium solutions with a high sulfate content were used to replicate the conditions in ore treatment leaching solutions. Considering the extraction kinetics, the equilibration time was found to increase with the ligand concentration, which can be explained by the clogging of micropores and the multilayer arrangement of the DEHCEBP molecules in the materials with their highest ligand contents. The fact that the equilibrium ligand/uranium ratio is about 2 mol/mol regardless of the ligand concentration in the material suggests that all the ligand molecules remain accessible for extraction. The maximum uranium extraction capacities ranged from 30 mg∙g−1 at 0.2 mmol∙g−1 DEHCEBP to 54 mg∙g−1 in the material with 0.5 mmol∙g−1 DEHCEBP. These materials could therefore potentially be used as solid-phase uranium extractants in acidic solutions with high sulfate concentrations.

Effective removal of 137Cs ions from radioactive wastewater by Melamine-Styrene based Polymer (MSP)

Cesium (Cs) is a major product of uranium fission, which is one of the most existed radionuclides in radioactive wastes. Removal of Cs-137 has a critical role in the decontamination of liquid radioactive waste due to its half-life of 30.17 years. Concordantly, melamine styrene based conjugated polymer (MSP) was designed, synthesized, and characterized with FTIR, TGA, SEM and BET measurements. The novelty of the study is that the MSP adsorbent is designed as a highly conjugated structure to have better interaction with Cs over the Cs-π bond of the benzene groups of the adsorbent. In this work, the adsorption behavior and rate of MSP were investigated as parameters of adsorbent amount, pH, contact time, particle size, initial Cs⁺ concentration, and temperature. Besides, the adsorption efficiency of Cs-137 was examined by Gamma Spectroscopy. Adsorption results were fitted to three different isotherms which were Freundlich, Langmuir and Dubinin-Radushkevich (D-R). The maximum adsorption capacity of polymer for Cs⁺ ion was found from Langmuir isotherm as 78 mg g^-1. As a part of kinetic parameters, pseudo first and second orders were investigated and in terms of the correlation coefficient pseudo second order was much more appropriate for adsorption of Cs-137 onto MSP.

An asymmetric pulsed current-assisted electrochemical method for Sr(Ⅱ) extraction using supramolecular composites

The development of effective, economical, and sustainable seawater extraction strontium techniques is of great significance to the environment and industrial needs. In this paper, an asymmetric pulsed current-assisted electrochemical (AP-CE) method was used to extract Sr(Ⅱ) from seawater using a carbon electrode modified by dibenzo-18-crown-6-ether and cellulose acetate. An asymmetric pulsed current was used to prevent unwanted cations from blocking adsorption sites to prevent water splitting. It also prevented the cellulose acetate membrane from sealing the crown ether. Compared with traditional physicochemical adsorption of Sr(Ⅱ), the AP-CE method achieved a higher removal efficiency and adsorption capacity. When the concentrations of Sr(Ⅱ) were 10, 20, 50, and 100 mg L^-1, the removal efficiencies of Sr(Ⅱ) were 99.3%, 97.6%, 97.3%, and 96.1%, and the adsorption capacities of Sr(Ⅱ) were 14.9, 29.3, 73.0, and 144.2 mg g^-1, respectively. This method exhibited excellent selectivity for Sr(Ⅱ) adsorption from simulated seawater, suggesting that the asymmetric pulse electrochemical method is promising for extracting strontium ions from seawater.

A comparative study of immobilizing ammonium molybdophosphate onto cellulose microsphere by radiation post-grafting and hybrid grafting for cesium removal

Ammonium molybdophosphate (AMP) exhibits high selectivity towards Cs but it cannot be directly applied in column packing, so it is necessary to prepare AMP-based adsorbents into an available form to improve its practicality. This work provided two AMP immobilized cellulose microspheres (MCC@AMP and MCC-g-AMP) as adsorbents for Cs removal by radiation grafting technique. MCC-g-AMP was prepared by radiation graft polymerization of GMA on microcrystalline cellulose microspheres (MCC) followed by reaction with AMP suspension, and MCC@AMP was synthesized by radiation hybrid grafting of AMP and GMA onto MCC through one step. The different structures and morphologies of two adsorbents were characterized by FTIR and SEM. The adsorption properties of two adsorbents against Cs were investigated and compared in batch and column experiments under different conditions. Both adsorbents were better obeyed pseudo-second-order kinetic model and Langmuir model. MCC-g-AMP presented faster adsorption kinetic and more stable structure, whereas MCC@AMP presented more facile synthesis and higher adsorption capacity. MCC@AMP was pH independent in the range of pH 1-12 but MCC-g-AMP was sensitive to pH for Cs removal. The saturated column adsorption capacities of MCC@AMP and MCC-g-AMP were 5.4 g-Cs/L-ad and 0.75 g-Cs/L-ad in column adsorption experiments at SV 10 h-1. Both adsorbents exhibited very high radiation stability and can maintain an adsorption capacity of >85% even after 1000 kGy γ-irradiation. On the basis, two AMP-loaded adsorbents possessed promising application in removal of Cs from actual contaminated groundwater. These findings provided two efficient adsorbents for treatment of Cs in radioactive waste disposal.

New short-channel SBA-15 mesoporous silicas functionalized with polyazamacrocyclic ligands for selective capturing of palladium ions in HNO3 media

Novel polyazamacrocyclic ligand decorated short-channel mesoporous silicas with the ability to selectively capture palladium ions in HNO₃ solutions.